VIAIR 10007 Constant Duty Onboard Air System - 12V Off-Road/Truck/RV Compressor

VIAIR 10007 Constant Duty Onboard Air System - 12V Off-Road/Truck/RV Compressor

VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle compressors, a 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.

Rated for inflation of 37" tires and up as well as a variety of pneumatic tools, VIAIR's Constant Duty OAS is a match for, and tough enough for just about any compression application imaginable. The system is designed to be mounted on compatible vehicles, effectively creating a pneumatic workshop on wheels. Supplied components include a 100% duty cycle 450C compressor with 150 PSI capabilities, a 2.5 gallon air tank, a pressure switch with relay, a dash panel gauge with on/off switch and a variety of additional components needed to install the working system in your vehicle.

As the "Constant Duty" name implies, 10007 is designed for heavy continuous work, yet although it does not require resting, it should not be run for more than an hour at a time. No matter the task, it can supply the air needed to get jobs done.

Features
2.5 Gallon VIAIR Air Tank
450C VIAIR Compressor w/Thermal Overload Protector
35ft. Coil Hose with Tire Chuck
Dash Panel Gauge with ON/OFF Switch
Pressure Switch with Relay (110 PSI on, 145 PSI off)
Reducer: 1/8” (F) to 1/4” (M)
1/4” Quick Connect Stud (F)
1/4” Quick Connect Coupler (F)
1/4” 175 PSI Safety Valve
1/4” Drain Cock
(3) 1/4” Compression Fittings
20ft. 12-Gauge Wire with Inline Fuse Holder
4” Strip of Continuous Grommet Material
Accessory Airline
Electrical Connections

Specifications
Motor voltage: 12 volt
Motor type: Permanent magnetic
Max. duty cycle: 100% @ 100 PSI
Max. working pressure: 150 PSI
Max. Amp draw: 19 Amps
Max. ambient temperature: 158°F
Min. ambient temperature: -40°F
CFM @ 0 PSI: 1.66
¼" NPT Intake Port

What's in the Box
1-2.5 gallon VIAIR air tank (six port)
1-450C 150 PSI VIAIR air compressor
1-35' coil hose with clip-on tire chuck
1-¼" NPT quick connect coupler (F)
1-Dash panel gauge with on/off Switch
1-Pressure switch with relay (110 PSI-on, 150 PSI-off)
1-reducer (⅛" NPT F to ¼" NPT M)
1-¼" NPT - 175 PSI safety valve
1-¼" NPT drain cock
1-¼" NPT compression fittings
1-4" Strip of continuous grommet material
1-20' section of 12 gauge wire with inline fuse holder
All necessary electrical connectors
Owner's manual

Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 450P-RV does not work with Presta bicycle valves, unless used with a Presta Valve Adaptor.