DS18 EN-DF10A 10" Loaded Amplified Shallow Down Fire Subwoofer Enclosure 250 Watts Rms
Designed to add magnificent bass to vehicles with minimal amounts of room for larger sized subs and boxes.
The EN-DF10A utilizes a 10 inch subwoofer in a compact enclosure (sized at 20” x 11” x 6”) to help extend and elaborate the bass for your music!
This subwoofer requires an external amplifier to feed it the 300 watts RMS it needs at 4 ohms. Equipped with rubber surround and plastic cone these speakers were built to last. The ferrite magnet and copper voice coil on these speakers gives added stability while enclosed for when these speakers are pushed to their limit.
The built in amp provides power at a power rating of 250W RMS and 500W MAX: perfect power settings for long-lasting jam sessions. The included dB boosting, phase adjusting, low pass filtration, and remote bass knob promotes genuine sound clarity by giving complete control over your audio when you need it. This amp also has hi-level inputs so it can be integrated into your factory audio system easily.
This enclosure housed subwoofer is sure to bring nothing but good vibes when the beat drops.
Features
Power Handling: 250W (14.4V) RMS / 500W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 86dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 25-250Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.52" / 38.6mm Cooper voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: Injection PP Cone cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Compact design allowing endless options for placement in areas with minimal space
Built in high power amplifier with remote control functionality.
250W RMS 500W MAX output engineered to power this compact subwoofer and enclosure to optimal production.
Specially designed 10 inch subwoofer that maximizes bass response in spaces that are not typically designed for subwoofers.
Small sealed box made of 5/9 MDF and covered in stylish black carpet
Highlights
Subwoofer Enclosure
1 X 10" Amplified with Subwoofer Control Knob
RMS Power: 250 Watts(500 Watts Peak)
Impedance: 2 Ohm ~ 86dB
5/8 MDF with Black Carpet
Shallow Down Firing
Specifications
General
Speaker Type / Size: 10" Active Subwoofer
Total Impedance: 2 ohms
Total RMS Power Handling: 250W (14.4V)
Total MAX Power Handling: 500W
Sensitivity (1w/1m): 86dB
Frequency Response: 25-250Hz
Recommended Lo Pass Crossover: 80Hz
Speaker Specifications
Voice Coil Diameter: 1.52" / 38.6mm
Voice Coil Former Material: Aluminum
Winding Material: Cooper
Cone Material: Injection PP Cone
Dust Cap Material: /
Surround Material: Rubber
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 40 Oz
Amplifier Specifications
Amplifier Class: Digital
Amplifier Type: Subwoofer Monoblock
Number of Channels: 1
Minimum Impedance: 2 ohms
Signal to Noise Ratio: 80dB
Efficiency @ 4ohm: 0.75
Damping Factor: /
Total Harmonic Distortion (THD): 0.005
Low Level Input Range: 200mV-6V
High Level Input: Yes
Auto Turn-On: Yes
Selectable X-Over: LPF Fixed
X-Over Filter Range: 30-150Hz
Bass Boost Range: 0-12dB
Bass Boost Frequency: 80Hz
Infrasonic Filter: No
Phase Selector: 0°~180°
Led Indicator: Power / Protection
Power Input Terminal Size: 8 GA
Fuse Size: 30A
Remote Level Control: Yes, Dash Mount
Cooling Fan: No
Voltmeter: No
Thermal Protection: Yes (>75℃)
Over-Load Protection: Yes
DC Output Protection: Yes
Short Circuit Output Protection: Yes
Voltage Input Protection: Yes (>17Vdc)
Clipping Protection: No
Extra Features
Very Strong Wood (MDF) Box for better sound: Yes
High Efficiency Digital Amplifier Built-In: Yes
Auto Turn-On Function when using Hi-Level Input for easier installation: Yes
Remote Level Knob to get easy amount of Bass control: Yes
Great For
Pro Audio
Car Audio
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
DS18 PU210A 10" Active Subwoofer Shallow Enclosure with 10" Passive Subwoofer For Pickup Trucks
Unleash high-performance bass in your pick-up with DS18’s PU210A subwoofer. This 10-inch active and passive subwoofer work in harmony to deliver punchy bass in tight spaces. Specifically designed for compact settings, its shallow enclosure seamlessly fits into tight spaces, ensuring your vehicle's cabin remains uncluttered while elevating your sound system to new heights.
DS18’s PU210A handles an impressive 350W RMS and peaks at 700W, providing powerful car audio that resonates with deep and impactful bass. Its frequency response ranges from 30–250Hz, capturing every nuance of your music with remarkable clarity. The sensitivity of 87dB ensures efficient sound reproduction, making it a top choice for truck audio upgrades.
Equipped with advanced controls such as a remote controller for gain adjustment, phase selector, and adjustable low-pass filter (LPF), this compact subwoofer for trucks allows you to tailor your listening experience to perfection. The bass boost feature further enhances the depth of sound, offering up to a 6dB increase.
Crafted with durability in mind, the PU210A features a robust sealed subwoofer box made from 5/8" MDF with a sleek black carpet finish. It houses a digital monoblock amplifier that includes thermal, overload, short circuit, and DC output protections, ensuring longevity and reliability.
Upgrade to high-performance bass with the expertly crafted PU210A!
Features
Power Handling: 350W RMS / 700W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 87dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 30-250Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.5" / 38.6mm EISV voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: IPP cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Sealed Box Enclosure: Factory-designed enclosure matched to the drivers for deep, efficient bass right out of the box.
Construction: 5/8" / 15mm MDF build for durability and a clean, finished look.
Highlights
Active Subwoofer Enclosure
2 X 10" Shallow Mount
RMS Power: 350 Watts(700 Watts Peak)
Impedance: 2 Ohm
Class D ~ Bass Knob
5/8" MDF with Black Carpet
Specifications
General
Speaker Type / Size: 10" Active + 10" Passive (261+261mm)
RMS Power Handling (14.4V): 350W
MAX Power Handling (14.4V): 700W
Sensitivity (1w/1m): 87dB
Frequency Response: 30-250Hz
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
Subwoofers are a must have for any audio system. Some audio enthusiasts don't have a lot of room for big subs, for example, in single cab trucks. Now we have a option for people craving great bass but don't have much space for it.
The SB12A is a slim 12 inch subwoofer in a sealed box that is powered by a powerful, built in 350w RMS amplifier that is sure to get the bass thumping hard in the minimal space that you have available in your vehicle.
Features
Power Handling: 350W RMS / 700W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 87dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 30-250Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.75" / 44.43mm EISV voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: IPP cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Rigid Basket: SPCC basket keeps the moving parts aligned under high power.
Sealed Box Enclosure: Factory-designed enclosure matched to the drivers for deep, efficient bass right out of the box.
Construction: 0.59" MDF build for durability and a clean, finished look.
Strong slim 12 inch sub that is sure to bring pounding bass where there is not much space.
Compact sealed box made of .6 inch MDF with included built in 350w RMS 700w max high power amplifier.
Easy to hook up and integrate with any system with the use of high level inputs or RCA jacks, whichever is easiest for you!
Highlights
Subwoofer Enclosure
1 X 12" Shallow Mount
Amplified with Subwoofer Control Knob
RMS Power: 350 Watts(700 Watts Peak)
Impedance: 2 Ohm ~ 87dB
1/2" MDF with Black Carpet
Specifications
General
Speaker Type / Size: 12" / 312mm
Total Impedance: 2 Ohm
Total RMS Power Handling: 350W
Total MAX Power Handling: 700W
Sensitivity (1w/1m): 87dB
Frequency Response: 30-250Hz
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
The SQBASS8 is an 8-Inch Subwoofer with a slim, compact design providing 600 Watts MAX and a frequency response of 20Hz - 150Hz. Low Impedance 2-Ohm subwoofer to bring out the maximum performance of the built-in amplifier. With it's compact size you can fit the SQBASS8 under your vehicle's seat without diminishing sound quality. With your remote bass control take control of your music experience by precisely adjusting the levels of the bass you desire. Digitally optimized subwoofer with built-in amplifier (2-Ohm) for efficient and accurate bass.
Features
Power Handling: 150W RMS / 800W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 79dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 36-300Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Cone Material: Polypropylene cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Compact design allowing you to place in areas with minimal space to get full clear bass in a small package.
150w rms and 600w max power making this small package creating large thumping bass.
Specially designed 8 inch woofer brings out more bass, precision, and tone
Highlights
8" Subwoofer Enclosure
Amplified with Subwoofer Control Knob
RMS Power: 150 Watts(800 Watts Peak)
Impedance: 2-Ohm
Under Car Seat
79dB
Specifications
General
Speaker Type / Size: 8"
Total RMS Power Handling: 150W
Total MAX Power Handling: 800W
Sensitivity (1w/1m): 79dB
Frequency Response: 36-300Hz
Remote Knob cable length: 16ft / 5m
Remote Knob Adjust Range: 0-30dB
Auto Turn-On: Yes, Signal Sensing
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
This is a prefabricated box that comes with one of our best selling subwoofers, the ZR12.2D. Included is a beautiful carpeted box with DS18 designs tuned to 29 HZ.
The box is constructed of thick 3/4 MDF for great sound and acoustical resonance. The subwoofer included is the very popular ZR12.2D that is a dual voice coil 2 ohm subwoofer wired in parallel for a final nominal impedance of 1 ohm that will require 800w RMS and 1600 W MAX.
This loaded box is a great solution to get hard hitting heavy bass for all to enjoy. To power this combo, we recommend a 1000w RMS amplifier like the ZR1000.1D to power this setup to its maximum potential.
Features
Power Handling: 800w RMS / 1600w max gives you plenty of headroom for loud, clean playback.
Sensitivity: 84 db sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 20-200 Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 2.5" / 61.6mm Copper voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Foam surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Single 12" Enclosure: Factory-designed enclosure matched to the drivers, tuned to 29 Hz, for deep, efficient bass right out of the box.
Construction: 3/4" (19mm) MDF build for durability and a clean, finished look.
The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass.
One ZR12.2D 12 inch subwoofer that will give you the cone area to push out great sounding bass without a lot of power requirements.
Highlights
ZR Subwoofer Enclosure
1 X 12" ZR12.2D
RMS Power: 800 Watts(1600Watts Peak)
Impedance: 1-Ohm ~ 84dB
3/4" MDF with Black Carpet
29 HZ Ported Box
Specifications
General
Speaker Type / Size: Single 12" / 316mm
Total Impedance: 1 Ohm
Total RMS Power Handling: 800w
Total MAX Power Handling: 1600w
Sensitivity (1w/1m): 84 db
Frequency Response: 20-200 Hz
Recommended Lo Pass Crossover: 70Hz
Speaker Specifications
Voice Coil Diameter: 2.5" / 61.6mm
Voice Coil Former Material: Aluminum
Winding Material: Copper
Cone Material: Non-Pressed Paper
Dust Cap Material: PPI
Surround Material: Foam
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 100 Oz
Box Specifications
Internal Volume: 79.3L / 2.8 ft3
Port Tune FB: 29 Hz
Load Configuration: Ported Box
Box Type: Single 12"
Box Material: 3/4" (19mm) MDF
Finish Material: Black Carpet
-3Db Dropping Point F3: 24 Hz
Measurements
Height: 14.48" / 36.8 cm
Width: 23.14" / 58.8 cm
Depth 1: 17.71" / 45 cm
Depth 2: 19.68" / 50 cm
Gross Single Unit Weight (lb): 68
Great For
Car Audio
Pro Audio
Hi-Fi Installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
The ZR212LD provides dual 12 inch subwoofers loaded into a ported box for the listeners who like it loud!
The ported box is tuned to 29 Hz and helps get the most from your subwoofers by delivering a deeper, punchier bass. Included in the ported box are two ZR12.4D subwoofers, one of our bestselling car audio subs, designed with dual 4-Ohms voice coils wired in parallel for a nominal impedance of 1-Ohm.
This loaded subwoofer combo offers great sound through high-quality and high-power subwoofers in a prefabricated box that is guaranteed to last! The RMS requirement is 1600W RMS and 3200W max: so in order to power this combo to maximum potential, we recommend a 2000W RMS Amplifier like the ZR2000.1D, H-KO2, or EXL-P2000X1D.
Features
Power Handling: 1600W RMS / 3200W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 86 db sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 20-200 Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 2.5" / 61.6mm Copper voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Foam surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Double 12" Enclosure: Factory-designed enclosure matched to the drivers, tuned to 29 Hz, for deep, efficient bass right out of the box.
Construction: 3/4" (19mm) MDF build for durability and a clean, finished look.
The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass
Dual 12 inch subwoofers with the cone area to blast great sounding bass more efficiently Subwoofers
Highlights
ZR Subwoofer Enclosure
2 x 12" ZR12.2
RMS Power: 1600 Watts(3200 Watts Peak)
Impedance: 1-Ohm ~ 86dB
3/4" MDF with Black Carpet
29 HZ Ported Box
Specifications
General
Speaker Type / Size: Dual 12" / 316mm
Total Impedance: 1 Ohm
Total RMS Power Handling: 1600W
Total MAX Power Handling: 3200W
Sensitivity (1w/1m): 86 db
Frequency Response: 20-200 Hz
Recommended Lo Pass Crossover: 70Hz
Speaker Specifications
Voice Coil Diameter: 2.5" / 61.6mm
Voice Coil Former Material: Aluminum
Winding Material: Copper
Cone Material: Non-Pressed Paper
Dust Cap Material: PPI
Surround Material: Foam
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 100 Oz
Measurements
Height: 14.48" / 36.8 cm
Width: 36.22" / 92 cm
Depth 1: 19.68" / 50 cm
Depth 2: 21.65" / 55 cm
Gross Single Unit Weight (lb): 107
Great For
Car Audio
Pro Audio
Hi-Fi Installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.