DS18 G6.5Xi GEN-X 6.5" 2-Way Coaxial Speakers 50 Watts Rms 4-Ohm
The power, clarity, and range everyone who likes it LOUD loves about the GEN-X series returns in an extremely durable steel basket protected by a (PC-ABS) Grill for a speaker that will outlast any vehicle its installed in.
The G6.5Xi was made for amplifiers, but can be used in factory settings with 4-ohm factory amplifiers in most cases for great sound and clarity over factory OEM speakers.
The Mylar Balanced Dome Tweeters included in this coaxial help it achieve the highest range of frequencies possible, while the speaker itself reaches frequencies as low as 35Hz. The 2-way design on these speakers bring a full range of frequencies with great response without the need for a large power requirement.
These speakers get loud extremely easily with a MAX Power Handling of 150W and RMS Power Handling of 50W.
Order the G6.5Xi for your system to expand your soundstage today!
Features
-
Power Handling: 50W RMS / 150W max gives you plenty of headroom for loud, clean playback.
-
Sensitivity: 86dB sensitivity lets it play efficiently on aftermarket or factory power.
-
Frequency Response: 35Hz-20KHz for full, balanced sound across its intended range.
-
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1" / 25.5mm EISV voice coil on an ASV former handles heat and power for long listening sessions.
-
Cone Material: Paper cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Rubber surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: Mylar diaphragm delivers crisp, detailed highs.
-
Long Excursion: Xmax of 2.7mm lets the cone move more air for deeper bass.
-
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
-
Mounting Depth: 2.15" / 54.5mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 60Hz high-pass filter to protect the speaker and get the cleanest output.
-
Grilles Included: Grilles are included to protect the speakers and finish the install.
- 2-Way Design implemented for full range quality on every listen
- Rubber surrounds with treated paper cones for great volume and sensitivity to power ratio
- Included Grills to protect your speakers as well as great looks to blend in to any vehicle
Highlights
6.5" 2-Way Coaxial
MAX Power: 150 Watts
RMS Power: 50 Watts
Impedance: 4 Ohm
Barium Ferrite & Neodymium Magnets
Pair ~ 86dB
Specifications
General
Nominal Diameter: 6.5" / 165mm
Nominal Impedance: 4 Ohms
RMS Power Handling: 50W
Maximum Power Handling: 150W
Sensitivity (1w/1m): 86dB
Frequency Response: 35Hz-20KHz
Recommended HI Pass Crossover: 60Hz
Number of ways: 2
Pair or single: Pair
Grill Included: Yes
Woofer
Voice Coil Diameter: 1" / 25.5mm
Voice Coil Former Material: ASV
Winding Material: EISV
Cone Material: Paper
Surround Material: Rubber
Basket Material: Steel
Basket Color/Finish: Black Matte
Magnet Material: Barium Ferrite
Magnet Weight: 9.87oz / 280g
Thiele & Small Parameters
Equivalent Volume Vas: 9.47L / 0.33ft3
Excursion (one way) Xmax: 2.7mm
Free Air Resonance Fs: 76Hz
Mechanical Factor Qms: 4.6
Electrical Factor Qes: 2
Total Factor Qts: 1.4
Mechanical Mass Mms: 11.4g
Mechanical Compliance Cms: 350mm/N
Bl Factor Bl: 3.2
Voice Coil Inductance Le: 172uH
Cone Area Sd: 136.8cm2
DC Resistance Re: 3.7 Ohms
Mechanical Mass w/o air Mmd: 10.5g
Tweeter
Nominal Diameter: 1" / 25.5mm
Voice Coil Diameter: 0.5" / 13.25mm
Voice Coil Former Material: ASV
Winding Material: EISVM
Diaphragm Material: Mylar
Magnet Material: Neodymium
Magnet Weight: 1.8g
Speaker Measurements
Overall Diameter: 6.5" / 165mm
Overall Depth: 2.65" / 67.3mm
Overall Diameter (With Grill): 7" / 179mm
Overall Depth (With Grill): 3" / 76.4mm
Front Mount Baffle Cutout: 5.6" / 142mm
Mounting Depth: 2.15" / 54.5mm
Motor Diameter: 3.4" / 86mm
Tweeter Protrusion: 0.5" / 12.8mm
Gross Single Unit Weight: 0.8KG
Great For
Car audio
Hi-Fi installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
