Comprised of tinned OFC copper conductors with polyethylene dielectrics
Assembled in a high rate twisted-pair configuration for ultimate noise rejection
Outer PVC jacket is flexible for easy routing through tight spaces
Molded connectors with machined, nickel-plated, brass contacts offer superior connection integrity
Signal transfer and maximum corrosion resistance
Premium 6 AWG 12-Volt Power Connection System for Single Amplifier - 50A Maximum
Ideal for most Runabouts and Cruisers where amplifier location is 10-20 feet (3-6 m) from battery, or closer Everything you need to make secure, high-integrity power connections to a single amplifier with up to a 50A fuse rating. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion. Included in this System:
Red 6 AWG Tinned Power Wire (with two Power Rings) - 2 ft (0.6 m)
Red 6 AWG Tinned Power Wire (with one Power Ring) - 18 ft (5.5 m)
Yellow 6 AWG Tinned Ground Wire (with one Power Ring) - 20 ft (6.1 m)
Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m)
50 Amp Marine Circuit Breaker - XMD-MCB-50
- Manual Reset Design with High-Visibility Switch (no fuses to blow) - IP67 Rated: withstands full immersion in water up to 1 meter deep - SAE J1171 External Ignition Protected: suitable for use in marine engine compartments and fuel tank locations - Stainless steel connection points for corrosion-resistance
KICKER is the only 12-volt aftermarket brand to offer a power distribution system that meets Coast Guard and ABYC standards, and is so safe it can be used in new boat construction. These fuses also meet SAE-J1171 standards for ignition protection, and are IP66 rated.
Kicker 47RT8 Marine Ring Terminals (4-Pack) - 8 Gauge
Covered in an anti-corrosive nickel plating, these ring terminals are the best way to keep your cables performing at their best – even under the roughest conditions.
If you are looking to give your off-road vehicle or boat a little extra sex appeal, Stinger’s new universal underbody kit adds illuminated RGB lighting to any area you desire. The plug-andplay installation makes adding this eye-catching feature easy, with no soldering or crimping needed. Bluetooth enabled you can control the lights via a mobile app choosing specific colors, dynamic modes, or really get the party started with the music-controlled mode which sets the LEDs to change with your music.
IPX65 WATERPROOF RATING
Reliable in the most extreme environments
BRIGHT CREE LEDS
Colorfully illuminate the vehicle with bright, powerful
LEDs APP CONTROLLED
Change LED colors and patterns with an Android or iOS smartphone
Kicker 47RT4 Marine Ring Terminals (4-Pack) - 4 Gauge
Covered in an anti-corrosive nickel plating, these ring terminals are the best way to keep your cables performing at their best – even under the roughest conditions.
You need the best possible connection from your amplifiers to ground. That’s why KICKER didn’t re-purpose a car-stereo solution to a marine environment. They created a simple, ABYC-compliant ground block made specifically for your boat. Use the RT-Series ring terminals for the best possible connection.
KICKER is the only 12-volt aftermarket brand to offer a power distribution system that meets Coast Guard and ABYC standards, and is so safe it can be used in new boat construction. These fuses also meet SAE-J1171 standards for ignition protection, and are IP66 rated.
The 3.5” marine-grade CREE LED transom lights are available in red, green, white, and blue and are suitable for many underwater applications including boats, pools, docks, and fountains. Each light features 6 CREELEDs, and a round stainless steel mounting ring, durable and ready to light up the water around it.
VERSATILE LIGHTING SOLUTION for Boats, Docks, Jacuzzi, and other underwater applications
BRIGHTLEDS colorfully illuminate the water with bright, powerfulLEDs
STAINLESS STEEL HOUSING engineered to survive extended salt water submersion
Features
LED marine underwater light
Surface mount
Stainless Steel housing
IP68 Waterproof
50000 working hours
Application: Boats, Docks, Jacuzzi, and other underwater applications
Mounting type: surface mounted
36W total output power
Dimensions & Weight (Main Product) • Dimensions: 90mm x 17mm x 68mm • Weight: 357g
Package Contents: 1 x Transom Light 1x water resistant fuse and fuse holder
The 3.5” marine-grade CREE LED transom lights are available in red, green, white, and blue and are suitable for many underwater applications including boats, pools, docks, and fountains. Each light features 6 CREELEDs, and a round stainless steel mounting ring, durable and ready to light up the water around it.
VERSATILE LIGHTING SOLUTION for Boats, Docks, Jacuzzi, and other underwater applications
BRIGHTLEDS colorfully illuminate the water with bright, powerfulLEDs
STAINLESS STEEL HOUSING engineered to survive extended salt water submersion
Features
LED marine underwater light
LED Surface mount underwater light
Stainless Steel housing
IP68 Waterproof
50000 working hours
Application: Boats, Docks, Jacuzzi, and other underwater applications
Mounting type: surface mounted
36W total output power
Dimensions & Weight (Main Product) • Dimensions: 90mm x 17mm x 68mm • Weight: 357g
Package Contents: 1 x Transom Light 1x water resistant fuse and fuse holder
White LED Marine Grill for KM10 Subwoofer
White LED grille with multi-color LED accent lighting that can be changed to fit your mood or craft.
Light Show Add LED grilles (sold separately) with seven selectable LED colors! Add the KMLC LED controller for 20 total colors and 19 different lighting modes to make it even more fun! Non-LED grilles also available.
Optional LED Remote Customize your LED lighting to get the perfect look for your boat.
The KMLC remote provides multi-function control of LED lighting by managing 20 different colors and 19 dynamic modes, including adjustable brightness, fade, speed/strobe and auto save.
KICKER is the only 12-volt aftermarket brand to offer a power distribution system that meets Coast Guard and ABYC standards, and is so safe it can be used in new boat construction. These fuses also meet SAE-J1171 standards for ignition protection, and are IP66 rated.
Designed for marine and powersports applications, the MBT-CRXv2 Bluetooth® Controller/Receiver delivers your favorite music from a Bluetooth® equipped device directly to your audio system.
With an IP67 water resistance rating, the MBT-CRXv2 is ideal for small watercraft, motorcycles, ATV’s or other utility vehicles. Add Bluetooth® connectivity to any source unit with line-level/auxiliary inputs or connect directly to an amplifier and use it as a stand-alone source unit/receiver. Large LED backlit push-button controls are easy-to-see and easy-to-use, day or night. A small footprint and clever, one-hole design makes installation a breeze. An adaptor plate is also included for easy front mounting or where rear access is limited or not possible.
Equipped with Bluetooth® v4.0 and the Qualcomm® aptX™ audio codec, the MBT-CRXv2 sends top-quality audio and performance from compatible devices to deliver dynamic, CD-like sound without any cables. With a wireless connection range of up to 35 ft., you can conveniently control the connected audio without returning to your Bluetooth® device. This means your device can stay safely tucked-away from the elements.
When you’re ready to set sail or tackle your next adventure, great sound is waiting for you with the MBT-CRXv2 Bluetooth® Audio Controller/Receiver.
KICKER is the only 12-volt aftermarket brand to offer a power distribution system that meets Coast Guard and ABYC standards, and is so safe it can be used in new boat construction. These fuses also meet SAE-J1171 standards for ignition protection, and are IP66 rated.
KICKER is the only 12-volt aftermarket brand to offer a power distribution system that meets Coast Guard and ABYC standards, and is so safe it can be used in new boat construction. These fuses also meet SAE-J1171 standards for ignition protection, and are IP66 rated.
KICKER is the only 12-volt aftermarket brand to offer a power distribution system that meets Coast Guard and ABYC standards, and is so safe it can be used in new boat construction. These fuses also meet SAE-J1171 standards for ignition protection, and are IP66 rated.