Stinger XI22YM

X2 Series 2 Male to 1 Female Y RCA Audio Interconnect

Excellent Sound Quality From Oversized OFC Conductors and Superior Noise Rejection from Directional, Twisted Pair Construction!

C3 Tech
Continuous Connection Construction (C3 Tech) provides unmatched signal transfer from no breaks in the signal chain from connector to connector. 

Quad-Clamp MAX RCA Connector
Quad-Clamp MAX's® precision machined, double wall thickness, 4-cut RCA connector allows for maximum clamping force and superior connection integrity. 

Dynamic Signal Flow
Dynamic Signal Flow is achieved by taking advantage of the "Skin Effect" of Signal vs. Frequency. By using finely stranded pure OFC copper. This combination optimizes signal vs frequency interaction and results in a truly dynamic listening experience. 

Noise Shield Directional Construction
Noise Shield Directional Construction uses 3 tightly twisted conductor bundles (+, -, signal drain) per channel then twists those channels around each other for the ultimate in directional noise cancelling architecture. Noise Shield Directional Construction works by policing noise that could be radiated into the cable. The noise is cancelled out by the same noise generated out of phase within the twisted construction. 

I.D. Interference Defense
The mobile environment is a haven for noise with computers, relays, ignition systems and other devices. EMI and radiated interference that can enter and degrade the audio signal via the RCA cable. I.D. Interference Defense® doubles the shielding efforts by combining 2 layers of EMI rejecting Mylar foil and radiated noise absorbing Copper Mesh eliminating unwanted noise and interference.

Stinger XI22YF

X2 Series 2 Female to 1 Male Y RCA Audio Interconnect

Excellent Sound Quality From Oversized OFC Conductors and Superior Noise Rejection from Directional, Twisted Pair Construction!

C3 Tech
Continuous Connection Construction (C3 Tech) provides unmatched signal transfer from no breaks in the signal chain from connector to connector. 

Quad-Clamp MAX RCA Connector
Quad-Clamp MAX's® precision machined, double wall thickness, 4-cut RCA connector allows for maximum clamping force and superior connection integrity. 

Dynamic Signal Flow
Dynamic Signal Flow is achieved by taking advantage of the "Skin Effect" of Signal vs. Frequency. By using finely stranded pure OFC copper. This combination optimizes signal vs frequency interaction and results in a truly dynamic listening experience. 

Noise Shield Directional Construction
Noise Shield Directional Construction uses 3 tightly twisted conductor bundles (+, -, signal drain) per channel then twists those channels around each other for the ultimate in directional noise cancelling architecture. Noise Shield Directional Construction works by policing noise that could be radiated into the cable. The noise is cancelled out by the same noise generated out of phase within the twisted construction. 

I.D. Interference Defense
The mobile environment is a haven for noise with computers, relays, ignition systems and other devices. EMI and radiated interference that can enter and degrade the audio signal via the RCA cable. I.D. Interference Defense® doubles the shielding efforts by combining 2 layers of EMI rejecting Mylar foil and radiated noise absorbing Copper Mesh eliminating unwanted noise and interference.

Stinger XI2420

Excellent Sound Quality From Oversized OFC Conductors and Superior Noise Rejection from Directional, Twisted Pair Construction!

Stinger XI1220

Superior noise rejection from directional, twisted pair construction!

JL Audio 98103

General Specifications

• Power Supply Type: Regulated DC-DC SMPS
• Input Operating Voltage: 10 - 16 VDC
• Standby Current Draw: <1.5 mA
• Operating Current Draw: 0.7 A
• Recommended Fuse Value: 1 A
• Input Channels: Eight
• Input Type: Differential-Balanced
• Input Voltage Range: 250 mV - 30 V RMS
• Minimum Input Voltage: 10 mV RMS
• Input Level Setting: Fully automatic
• Output Channels: Six (Front/Rear/Sub Output Pairs)
• Analog Output: Unbalanced, stereo RCA jacks
• Digital Output: N/A
• Output Impedance: 450 Ω
• S/N Ratio: 96 dB (A-Weighted, referred to 4V RMS Output)
• THD+N @ Rated Output: 0.02% (20 Hz - 20 kHz

• Audio Resolution: 24 bit / 48 kHz
• Number of EQ Bands: 30 x 2 channels
• EQ Resolution: 1/3 octave (25 Hz - 20 kHz)
• Remote Level Control: Optional (DRC-100 or DRC-200)
• Remote Level Functions: Master Volume Control, Handsfree Optimization, LED Status Reporting (DRC-200 adds Subwoofer Level Control)

• Height (H): 1.85 in / 47 mm
• Width (W): 4.29 in / 109 mm
• Depth (D): 6.14 in / 156 mm
• Net Weight: 2.58 lb / 1.17 kg

Stinger XI1420

Superior noise rejection from directional, twisted pair construction!

JL Audio XMD-PCS50A-1-L10

• Red 6 AWG Tinned Power Wire (with two Power Rings) - 2 ft (0.6 m)
• Red 6 AWG Tinned Power Wire (with one Power Ring) - 8 ft (2.4 m)
• Yellow 6 AWG Tinned Ground Wire (with one Power Ring) - 10 ft (3 m)
• Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m)
• 50 Amp Marine Circuit Breaker - XMD-MCB-50
• Manual Reset Design with High-Visibility Switch (no fuses to blow)
• IP67 Rated: withstands full immersion in water up to 1 meter deep
• SAE J1171 External Ignition Protected: suitable for use in marine engine compartments and fuel tank locations
• Stainless steel connection points for corrosion-resistance

Stinger SEA4287

• Power wiring kit utilizing marine-grade jacket. True Copper for current transfer and tinned conductors for reliability in the harsh marine environment
• Industry first Siamese Pair dual power and ground wire
• High strand count OFC hyper-twist tinned conductors
• Highest marine-grade - Type III BC5W2 Compliant Marine PVC jacket, 1050C dry, 750C wet, salt, fog, oil, water-resistance exceeds UL1426 Marine Standards
• Element-resistant MIDI fuse holder
• 8GA 7 meter / 23 feet / 40 amp MIDI fus

Stinger SPD5203 Shoc-Krome 0/4 Gauge Water Resistant ANL Fuseholder

The attractive, water resistant, high amperage design is the ultimate fuse holder for harsh environments. With its molded mounting bracket and Allen set screw style termination, installation is quick and easy. Designed for use with 1/0 or 4 gauge wire and accepts all ANL fuses from 60 to 300 amps.

Stinger SPF5880 PRO Shoc-Krome 80 AMP MIDI Fuse (3/pack)

Stinger SPT55301

Stinger SPD513

JL Audio XMD-PCS50A-1-L20

• Red 6 AWG Tinned Power Wire (with two Power Rings) - 2 ft (0.6 m)
• Red 6 AWG Tinned Power Wire (with one Power Ring) - 18 ft (5.5 m)
• Yellow 6 AWG Tinned Ground Wire (with one Power Ring) - 20 ft (6.1 m)
• Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m)

• 50 Amp Marine Circuit Breaker - XMD-MCB-50