Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
The ZXI series is the go to DS18 line for great sounding audio that not only has very high volume, but also amazing sound quality for an amazing price. The ZXI-694 is a 6x9", 4 ohm coaxial speaker designed for mid tier audio enthusiasts to the extreme as they have an amazing range of frequencies and loudness. The 2-way design will ensure that you receive a full range of frequencies for an audio experience that you will truly remember.
Features
Power Handling: 120W RMS / 360W max gives you plenty of headroom for loud, clean playback.
High Sensitivity: 92dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
Frequency Response: 31.5Hz-20KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.2" / 30.4mm EISV voice coil on a KSV former handles heat and power for long listening sessions.
Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Long Excursion: Xmax of 3.3mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Recommended High-Pass: Use a 50Hz high-pass filter to protect the speaker and get the cleanest output.
The ZXi line is a complete line of amps, subs, mids, and tweeters so you can match all your equipment up to be the same for an amazing show quality look.
6x9" inch 2 way 4 ohm speaker requiring 120w RMS and 360w max power handling that gives amazing sound from low to extremely high volume.
2-way design will be sure to give you a full range of frequencies for an amazing audio experience to remember.
General
Nominal Diameter: 6X9" / 162*235mm
Nominal Impedance: 4 ohm
RMS Power Handing: 120W
MAX Power Handing: 360W
Sensitivity (1w/1m): 92dB
Frequency Response: 31.5Hz-20KHz
Recommended HI Pass Crossover: 50Hz
Number of ways: 2-Way
Thiele & Small Parameters
Equivalent Volume Vas: 17.52L
Excursion (one way) Xmax: 3.3mm
Free Air Resonance Fs: 58Hz
Mechanical Factor Qms: 5.77
Electrical Factor Qes: 1.18
Total Factor Qts: 0.98
Mechanical Mass Mms: 23.44g
Mechanical Compliance Cms: 286mm/N
BL Factor Bl: 5.18
Voice Coil Inductance Le: 178mH
Cone Area Sd: 207.7cm2
DC Resistance Re: 3.5 ohm
Mechanical Mass w/o air Mmd: 20g
Measurements
Overall Diameter: 6.37X9.25" / 162*235mm
Overall Depth: 3.66" / 93mm
Front Mount Baffle Cutout: 5.94x8.70" / 151*221mm
Mouting Depth: 3.22" / 82mm
Motor Diameter: 4.09" / 104mm
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
The ZXI series is the go to DS18 line for great sounding audio that not only has very high volume, but also amazing sound quality for an amazing price. The ZXI-694 is a 6x9", 4 ohm coaxial speaker designed for mid tier audio enthusiasts to the extreme as they have an amazing range of frequencies and loudness. The 2-way design will ensure that you receive a full range of frequencies for an audio experience that you will truly remember.
Features
Power Handling: 120W RMS / 360W max gives you plenty of headroom for loud, clean playback.
High Sensitivity: 92dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
Frequency Response: 31.5Hz-20KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.2" / 30.4mm EISV voice coil on a KSV former handles heat and power for long listening sessions.
Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Long Excursion: Xmax of 3.3mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Recommended High-Pass: Use a 50Hz high-pass filter to protect the speaker and get the cleanest output.
The ZXi line is a complete line of amps, subs, mids, and tweeters so you can match all your equipment up to be the same for an amazing show quality look.
6x9" inch 2 way 4 ohm speaker requiring 120w RMS and 360w max power handling that gives amazing sound from low to extremely high volume.
2-way design will be sure to give you a full range of frequencies for an amazing audio experience to remember.
General
Nominal Diameter: 6X9" / 162*235mm
Nominal Impedance: 4 ohm
RMS Power Handing: 120W
MAX Power Handing: 360W
Sensitivity (1w/1m): 92dB
Frequency Response: 31.5Hz-20KHz
Recommended HI Pass Crossover: 50Hz
Number of ways: 2-Way
Thiele & Small Parameters
Equivalent Volume Vas: 17.52L
Excursion (one way) Xmax: 3.3mm
Free Air Resonance Fs: 58Hz
Mechanical Factor Qms: 5.77
Electrical Factor Qes: 1.18
Total Factor Qts: 0.98
Mechanical Mass Mms: 23.44g
Mechanical Compliance Cms: 286mm/N
BL Factor Bl: 5.18
Voice Coil Inductance Le: 178mH
Cone Area Sd: 207.7cm2
DC Resistance Re: 3.5 ohm
Mechanical Mass w/o air Mmd: 20g
Measurements
Overall Diameter: 6.37X9.25" / 162*235mm
Overall Depth: 3.66" / 93mm
Front Mount Baffle Cutout: 5.94x8.70" / 151*221mm
Mouting Depth: 3.22" / 82mm
Motor Diameter: 4.09" / 104mm
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.