Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
DS18 ZXI-62C ZXI 6.5" 2- Way Component Speaker System with Kevlar Cone | 120 Watts Rms 4-Ohm
DS18's ZXI line is both highly innovative and intuitive making it a very versatile audio line that will bring you loud and clear music on demand. This component set includes a one-way 6.5" that takes 120w RMS and 240 Max watts. It has a 88 dB sensitivity rating, you don't need a lot of power to bring these very loud speakers to extremely high volumes. Also included is a 30w RMS tweeter that can either be mounted on the grill assembly, or in another location of your choosing. The included DS18 passive crossover will get your frequency just right for the best sound available. These speakers are an amazing choice for your average every day to extreme audiophile!
Features
Power Handling: 120 WATTS RMS / 240 WATTS max gives you plenty of headroom for loud, clean playback.
Sensitivity: 88 dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 40 Hz - 20 KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 25.5 mm (1 inch) EISV voice coil on a KSV former handles heat and power for long listening sessions.
Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
General
Nominal Diameter: 6.5 Inches / 165 mm
Nominal Impedance: 4 ohm
RMS Power Handing: 120 WATTS
MAX Power Handing: 240 WATTS
Sensitivity: 88 dB
Frequency Response: 40 Hz - 20 KHz
Recommended HI Pass: 60 Hz
Speaker Type: 2-Way
Tweeter
Nominal Diameter: 31.7 mm (1.25 inch)
Voice Coil Diameter: 25.5 mm (1 inch)
Voice Coil Former Material: ASV
Winding Material: EISVM
Diaphragm Material: SILK
Magnet Material: Neodymium
Magnet Weight: 13 g / 0.46 oz
Pair: Yes
Crossover Specifications & Features
Passive Crossover Ways: 2 Ways
Frequency Crossover point: 3.5 Khz
Cut-Off Slope: 12 dB / Oct
Tweeter Attenuation: (+/- 3 dB)
Capacitor Type: NP
Coil Type: KSV
Housing Material: ABS / Acrylic
Adjustments: Tw Attenuation
Extra Features: Pt Tw protection
Pair: Yes
Thiele & Small Parameters
Vas: 10.36 LTR
Xmax: 2.7 mm
Fs: 64 Hz
Qms: 9.50
Qes: 0.85
Qts: 0.78
Measurements
Product Weight: 7 lbs
Product Dimensions: 16 x 10.75 x 3.5
Sold In: Pair
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
DS18 ZXI-62C ZXI 6.5" 2- Way Component Speaker System with Kevlar Cone | 120 Watts Rms 4-Ohm
DS18's ZXI line is both highly innovative and intuitive making it a very versatile audio line that will bring you loud and clear music on demand. This component set includes a one-way 6.5" that takes 120w RMS and 240 Max watts. It has a 88 dB sensitivity rating, you don't need a lot of power to bring these very loud speakers to extremely high volumes. Also included is a 30w RMS tweeter that can either be mounted on the grill assembly, or in another location of your choosing. The included DS18 passive crossover will get your frequency just right for the best sound available. These speakers are an amazing choice for your average every day to extreme audiophile!
Features
Power Handling: 120 WATTS RMS / 240 WATTS max gives you plenty of headroom for loud, clean playback.
Sensitivity: 88 dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 40 Hz - 20 KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 25.5 mm (1 inch) EISV voice coil on a KSV former handles heat and power for long listening sessions.
Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
General
Nominal Diameter: 6.5 Inches / 165 mm
Nominal Impedance: 4 ohm
RMS Power Handing: 120 WATTS
MAX Power Handing: 240 WATTS
Sensitivity: 88 dB
Frequency Response: 40 Hz - 20 KHz
Recommended HI Pass: 60 Hz
Speaker Type: 2-Way
Tweeter
Nominal Diameter: 31.7 mm (1.25 inch)
Voice Coil Diameter: 25.5 mm (1 inch)
Voice Coil Former Material: ASV
Winding Material: EISVM
Diaphragm Material: SILK
Magnet Material: Neodymium
Magnet Weight: 13 g / 0.46 oz
Pair: Yes
Crossover Specifications & Features
Passive Crossover Ways: 2 Ways
Frequency Crossover point: 3.5 Khz
Cut-Off Slope: 12 dB / Oct
Tweeter Attenuation: (+/- 3 dB)
Capacitor Type: NP
Coil Type: KSV
Housing Material: ABS / Acrylic
Adjustments: Tw Attenuation
Extra Features: Pt Tw protection
Pair: Yes
Thiele & Small Parameters
Vas: 10.36 LTR
Xmax: 2.7 mm
Fs: 64 Hz
Qms: 9.50
Qes: 0.85
Qts: 0.78
Measurements
Product Weight: 7 lbs
Product Dimensions: 16 x 10.75 x 3.5
Sold In: Pair
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.