Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
The ZXI series is the go to DS18 line for great sounding audio that not only has very high volume, but also amazing sound quality for an amazing price. The ZXI-464 is 4x6 inch, 4 ohms coaxial speaker designed for mid tier audio enthusiasts to the extreme as they have an amazing range of frequencies and loudness. The 2 way design will ensure that you receive a full range of frequencies for an audio experience that you will truly remember.
Features
Power Handling: 60 WATTS RMS / 180 WATTS max gives you plenty of headroom for loud, clean playback.
Sensitivity: 87 dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 80 Hz - 20 KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 25.5 mm (1 inch) EISV voice coil on a KSV former handles heat and power for long listening sessions.
Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Long Excursion: Xmax of 2.3 mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Mounting Depth: 52 mm (2.05 inch) mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
Recommended High-Pass: Use a 100 Hz high-pass filter to protect the speaker and get the cleanest output.
The ZXi line is a complete line of amps, subs, mids, and tweeters so you can match all your equipment up to be the same for an amazing show quality look.
4x6" 2 - way 4 ohms speaker requiring 60w RMS and 180w Max power handling that gives amazing sound from low to extremely high volume.
2 way design will be sure to give you a full range of frequencies for an amazing audio experience to remember
General
Nominal Diameter: 4 X 6 Inches
Nominal Impedance: 4 ohm
RMS Power Handing: 60 WATTS
MAX Power Handing: 180 WATTS
Sensitivity: 87 dB
Frequency Response: 80 Hz - 20 KHz
Recommended HI Pass: 100 Hz
Speaker Type: 2-Way
Midrange
Voice Coil Diameter: 25.5 mm (1 inch)
Voice Coil Former Material: KSV
Winding Material: EISV
Cone Material: Glass fiber
Surround Material: Rubber
Basket Material: Steel
Magnet Material: Barium Ferrite
Magnet Weight: 10.9 oz / 310 g
Tweeter
Nominal Diameter: 25.4 mm (1 inch)
Voice Coil Diameter: 20.4 mm (0.8 inch)
Voice Coil Former Material: KSV
Winding Material: EISVM
Diaphragm Material: PEI
Magnet Material: Neodymium
Magnet Weight: 8.5 g / 0.3 oz
Thiele & Small Parameters
Vas: 1.989 LTR
Xmax: 2.3 mm
Fs: 77 Hz
Qms: 5.97
Qes: 1.15
Qts: 0.97
Mms: 9.79 g
Cms: 232 mm / N
BL: 4.44
Le: 216 mH
Sd: 77.7 cm2
Re: 3.5 ohm
Mmd: 9 g
Measurements
Overall Diameter: 3.82 x 5.94 inch (97 x 151 mm)
Overall Depth: 71 mm (2.80 inch)
Front Mount Baffle Cutout: 87.8 x 140 mm (3.46 x 5.51 inch)
Mounting Depth: 52 mm (2.05 inch)
Motor Diameter: 84 mm (3.31 inch)
Product Weight: 4.5 lbs
Product Dimensions: 11.5 x 8 x 3.5
Sold In: Pair
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
The ZXI series is the go to DS18 line for great sounding audio that not only has very high volume, but also amazing sound quality for an amazing price. The ZXI-464 is 4x6 inch, 4 ohms coaxial speaker designed for mid tier audio enthusiasts to the extreme as they have an amazing range of frequencies and loudness. The 2 way design will ensure that you receive a full range of frequencies for an audio experience that you will truly remember.
Features
Power Handling: 60 WATTS RMS / 180 WATTS max gives you plenty of headroom for loud, clean playback.
Sensitivity: 87 dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 80 Hz - 20 KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 25.5 mm (1 inch) EISV voice coil on a KSV former handles heat and power for long listening sessions.
Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
Long Excursion: Xmax of 2.3 mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Mounting Depth: 52 mm (2.05 inch) mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
Recommended High-Pass: Use a 100 Hz high-pass filter to protect the speaker and get the cleanest output.
The ZXi line is a complete line of amps, subs, mids, and tweeters so you can match all your equipment up to be the same for an amazing show quality look.
4x6" 2 - way 4 ohms speaker requiring 60w RMS and 180w Max power handling that gives amazing sound from low to extremely high volume.
2 way design will be sure to give you a full range of frequencies for an amazing audio experience to remember
General
Nominal Diameter: 4 X 6 Inches
Nominal Impedance: 4 ohm
RMS Power Handing: 60 WATTS
MAX Power Handing: 180 WATTS
Sensitivity: 87 dB
Frequency Response: 80 Hz - 20 KHz
Recommended HI Pass: 100 Hz
Speaker Type: 2-Way
Midrange
Voice Coil Diameter: 25.5 mm (1 inch)
Voice Coil Former Material: KSV
Winding Material: EISV
Cone Material: Glass fiber
Surround Material: Rubber
Basket Material: Steel
Magnet Material: Barium Ferrite
Magnet Weight: 10.9 oz / 310 g
Tweeter
Nominal Diameter: 25.4 mm (1 inch)
Voice Coil Diameter: 20.4 mm (0.8 inch)
Voice Coil Former Material: KSV
Winding Material: EISVM
Diaphragm Material: PEI
Magnet Material: Neodymium
Magnet Weight: 8.5 g / 0.3 oz
Thiele & Small Parameters
Vas: 1.989 LTR
Xmax: 2.3 mm
Fs: 77 Hz
Qms: 5.97
Qes: 1.15
Qts: 0.97
Mms: 9.79 g
Cms: 232 mm / N
BL: 4.44
Le: 216 mH
Sd: 77.7 cm2
Re: 3.5 ohm
Mmd: 9 g
Measurements
Overall Diameter: 3.82 x 5.94 inch (97 x 151 mm)
Overall Depth: 71 mm (2.80 inch)
Front Mount Baffle Cutout: 87.8 x 140 mm (3.46 x 5.51 inch)
Mounting Depth: 52 mm (2.05 inch)
Motor Diameter: 84 mm (3.31 inch)
Product Weight: 4.5 lbs
Product Dimensions: 11.5 x 8 x 3.5
Sold In: Pair
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.