Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
DS18 ZR600.4D ZR 4-Channel Class D Amplifier 4 x 150 Watts Rms @ 4-ohm
DS18’s ZR series of amplifiers are guaranteed to supercharge your sound system to deliver brilliant sound and bulky bass frequencies.
The ZR series was designed to pump up the bass and help your speakers reach their maximum potential as a part of your sound system. The ZR600.4D offers a surplus of tuning options: Low pass, High pass, and Full Frequency Selector Switches, as well as Gain Knob to help tune any song to your frequency.
The ZR600.4D is made to deliver 2 x 400W RMS @ 4-Ohms Bridge, 4 x 240W RMS @ 2-Ohms, and 4 x 150W RMS @ 4-Ohms giving you the perfect power for your bass.
Features
Class D Efficiency: The digital Class D design runs cooler and draws less current than traditional amplifiers, so it fits in tight spaces and is easier on your electrical system.
2 ohm (Stereo) / 4 ohm (Bridge) Stable: Handles low-impedance loads, giving you more flexibility when wiring multiple speakers or subwoofers for maximum output.
Adjustable Crossover: FULL/LPF/HPF crossover adjustable from 40Hz-4KHz lets you send each speaker only the frequencies it plays best.
Protection Circuitry: Built-in thermal, overload, DC output, short circuit, voltage input, clipping protection helps keep the amplifier and your speakers safe during hard use.
Status Indicators: clipping/protect/power LEDs make it easy to confirm the amp is working and spot problems at a glance.
Heavy-Gauge Power Terminals: 4ga power and ground terminals deliver current with minimal loss.
High Efficiency: Up to 90% efficiency at 4 ohms turns more of your electrical system into sound and less into heat.
Specifications
Power
Total Watts (Peak): 2400W
RMS Power @ 4 ohm: 4 x 150W
RMS Power @ 2 ohm: 4 x 240W
RMS Power @ 4 ohm Bridge: 2 x 400W
Audio
Frequency Response: 20Hz-20KHz
Signal to Noise Ratio: >90dB
Efficiency @ 4ohm: 90%
Damping Factor: 160
Input Impedance: 20K ohm
Channel Separation: 60dB
Total Harmonic Distortion (THD): 1.00%
Low Level Input Range: 0.2-6V
High Level Input: No
Selectable X-Over: FULL/LPF/HPF
X-Over Filter Range: 40Hz-4KHz
Bass Boost Range: No
Infrasonic Filter: No
Phase Selector: No
FEATURES: Description / Type
Amplifier Class: Digital
Amplifier Type: Stereo Full Range
Number of Channels: 4
Minimum Impedance: 2 ohm (Stereo) / 4 ohm (Bridge)
Led Indicator: clipping/protect/power
Power Input Terminal Size: 4ga
Fuse Size: 2*30A
Remote Level Control: No
Cooling Fan: No
Voltmeter: No
Thermal Protection: Yes
Over-Load Protection: Yes
DC Output Protection: Yes
Short Circuit Output Protection: Yes
Voltage Input Protection: Yes <9 / >16 Volts
Clipping Protection: Yes
Body Color / Finish: Black Aluminum Brush
Great For
Car Audio
Pro Audio
Motorcycles
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
DS18 ZR600.4D ZR 4-Channel Class D Amplifier 4 x 150 Watts Rms @ 4-ohm
DS18’s ZR series of amplifiers are guaranteed to supercharge your sound system to deliver brilliant sound and bulky bass frequencies.
The ZR series was designed to pump up the bass and help your speakers reach their maximum potential as a part of your sound system. The ZR600.4D offers a surplus of tuning options: Low pass, High pass, and Full Frequency Selector Switches, as well as Gain Knob to help tune any song to your frequency.
The ZR600.4D is made to deliver 2 x 400W RMS @ 4-Ohms Bridge, 4 x 240W RMS @ 2-Ohms, and 4 x 150W RMS @ 4-Ohms giving you the perfect power for your bass.
Features
Class D Efficiency: The digital Class D design runs cooler and draws less current than traditional amplifiers, so it fits in tight spaces and is easier on your electrical system.
2 ohm (Stereo) / 4 ohm (Bridge) Stable: Handles low-impedance loads, giving you more flexibility when wiring multiple speakers or subwoofers for maximum output.
Adjustable Crossover: FULL/LPF/HPF crossover adjustable from 40Hz-4KHz lets you send each speaker only the frequencies it plays best.
Protection Circuitry: Built-in thermal, overload, DC output, short circuit, voltage input, clipping protection helps keep the amplifier and your speakers safe during hard use.
Status Indicators: clipping/protect/power LEDs make it easy to confirm the amp is working and spot problems at a glance.
Heavy-Gauge Power Terminals: 4ga power and ground terminals deliver current with minimal loss.
High Efficiency: Up to 90% efficiency at 4 ohms turns more of your electrical system into sound and less into heat.
Specifications
Power
Total Watts (Peak): 2400W
RMS Power @ 4 ohm: 4 x 150W
RMS Power @ 2 ohm: 4 x 240W
RMS Power @ 4 ohm Bridge: 2 x 400W
Audio
Frequency Response: 20Hz-20KHz
Signal to Noise Ratio: >90dB
Efficiency @ 4ohm: 90%
Damping Factor: 160
Input Impedance: 20K ohm
Channel Separation: 60dB
Total Harmonic Distortion (THD): 1.00%
Low Level Input Range: 0.2-6V
High Level Input: No
Selectable X-Over: FULL/LPF/HPF
X-Over Filter Range: 40Hz-4KHz
Bass Boost Range: No
Infrasonic Filter: No
Phase Selector: No
FEATURES: Description / Type
Amplifier Class: Digital
Amplifier Type: Stereo Full Range
Number of Channels: 4
Minimum Impedance: 2 ohm (Stereo) / 4 ohm (Bridge)
Led Indicator: clipping/protect/power
Power Input Terminal Size: 4ga
Fuse Size: 2*30A
Remote Level Control: No
Cooling Fan: No
Voltmeter: No
Thermal Protection: Yes
Over-Load Protection: Yes
DC Output Protection: Yes
Short Circuit Output Protection: Yes
Voltage Input Protection: Yes <9 / >16 Volts
Clipping Protection: Yes
Body Color / Finish: Black Aluminum Brush
Great For
Car Audio
Pro Audio
Motorcycles
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.