Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
The ZR212LD provides dual 12 inch subwoofers loaded into a ported box for the listeners who like it loud!
The ported box is tuned to 29 Hz and helps get the most from your subwoofers by delivering a deeper, punchier bass. Included in the ported box are two ZR12.4D subwoofers, one of our bestselling car audio subs, designed with dual 4-Ohms voice coils wired in parallel for a nominal impedance of 1-Ohm.
This loaded subwoofer combo offers great sound through high-quality and high-power subwoofers in a prefabricated box that is guaranteed to last! The RMS requirement is 1600W RMS and 3200W max: so in order to power this combo to maximum potential, we recommend a 2000W RMS Amplifier like the ZR2000.1D, H-KO2, or EXL-P2000X1D.
Features
Power Handling: 1600W RMS / 3200W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 86 db sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 20-200 Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 2.5" / 61.6mm Copper voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Foam surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Double 12" Enclosure: Factory-designed enclosure matched to the drivers, tuned to 29 Hz, for deep, efficient bass right out of the box.
Construction: 3/4" (19mm) MDF build for durability and a clean, finished look.
The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass
Dual 12 inch subwoofers with the cone area to blast great sounding bass more efficiently Subwoofers
Highlights
ZR Subwoofer Enclosure
2 x 12" ZR12.2
RMS Power: 1600 Watts(3200 Watts Peak)
Impedance: 1-Ohm ~ 86dB
3/4" MDF with Black Carpet
29 HZ Ported Box
Specifications
General
Speaker Type / Size: Dual 12" / 316mm
Total Impedance: 1 Ohm
Total RMS Power Handling: 1600W
Total MAX Power Handling: 3200W
Sensitivity (1w/1m): 86 db
Frequency Response: 20-200 Hz
Recommended Lo Pass Crossover: 70Hz
Speaker Specifications
Voice Coil Diameter: 2.5" / 61.6mm
Voice Coil Former Material: Aluminum
Winding Material: Copper
Cone Material: Non-Pressed Paper
Dust Cap Material: PPI
Surround Material: Foam
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 100 Oz
Measurements
Height: 14.48" / 36.8 cm
Width: 36.22" / 92 cm
Depth 1: 19.68" / 50 cm
Depth 2: 21.65" / 55 cm
Gross Single Unit Weight (lb): 107
Great For
Car Audio
Pro Audio
Hi-Fi Installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
The ZR212LD provides dual 12 inch subwoofers loaded into a ported box for the listeners who like it loud!
The ported box is tuned to 29 Hz and helps get the most from your subwoofers by delivering a deeper, punchier bass. Included in the ported box are two ZR12.4D subwoofers, one of our bestselling car audio subs, designed with dual 4-Ohms voice coils wired in parallel for a nominal impedance of 1-Ohm.
This loaded subwoofer combo offers great sound through high-quality and high-power subwoofers in a prefabricated box that is guaranteed to last! The RMS requirement is 1600W RMS and 3200W max: so in order to power this combo to maximum potential, we recommend a 2000W RMS Amplifier like the ZR2000.1D, H-KO2, or EXL-P2000X1D.
Features
Power Handling: 1600W RMS / 3200W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 86 db sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 20-200 Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 2.5" / 61.6mm Copper voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Foam surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Double 12" Enclosure: Factory-designed enclosure matched to the drivers, tuned to 29 Hz, for deep, efficient bass right out of the box.
Construction: 3/4" (19mm) MDF build for durability and a clean, finished look.
The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass
Dual 12 inch subwoofers with the cone area to blast great sounding bass more efficiently Subwoofers
Highlights
ZR Subwoofer Enclosure
2 x 12" ZR12.2
RMS Power: 1600 Watts(3200 Watts Peak)
Impedance: 1-Ohm ~ 86dB
3/4" MDF with Black Carpet
29 HZ Ported Box
Specifications
General
Speaker Type / Size: Dual 12" / 316mm
Total Impedance: 1 Ohm
Total RMS Power Handling: 1600W
Total MAX Power Handling: 3200W
Sensitivity (1w/1m): 86 db
Frequency Response: 20-200 Hz
Recommended Lo Pass Crossover: 70Hz
Speaker Specifications
Voice Coil Diameter: 2.5" / 61.6mm
Voice Coil Former Material: Aluminum
Winding Material: Copper
Cone Material: Non-Pressed Paper
Dust Cap Material: PPI
Surround Material: Foam
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 100 Oz
Measurements
Height: 14.48" / 36.8 cm
Width: 36.22" / 92 cm
Depth 1: 19.68" / 50 cm
Depth 2: 21.65" / 55 cm
Gross Single Unit Weight (lb): 107
Great For
Car Audio
Pro Audio
Hi-Fi Installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.