DS18 ZR2000.1D ZR 1-Channel Class D Amplifier 2000 Watts Rms @ 1-Ohm
The ZR Series amps are sure to power all your subwoofers with great sound acuity and massive bass frequency responses.
They have been designed to efficiently pump out hard hitting bass and put your subwoofers at their maximum potential. Easily tuned, The ZR2000.1D comes with Lowpass and Subsonic filters to help you set to the perfect frequency for your music preference.
The included bass knob will help you attenuate your bass with a quick turn of the dial to tune in your bass volume with every song you play. The ZR2000.1D is made to deliver 2000 watts RMS @ 1-Ohm, 1300 watts RMS @ 2-Ohms, and 800 watts RMS @ 4 ohms giving you the perfect power for your bass.
Features
-
Power Output: Delivers 1 x 2000 Watts @ 1 Ohm of clean, continuous power to drive your speakers or subwoofers with authority.
-
Class D Efficiency: The digital Class D design runs cooler and draws less current than traditional amplifiers, so it fits in tight spaces and is easier on your electrical system.
-
1 Ohm Stable: Handles low-impedance loads, giving you more flexibility when wiring multiple speakers or subwoofers for maximum output.
-
Adjustable Crossover: LPF Fixed crossover adjustable from 40-180Hz lets you send each speaker only the frequencies it plays best.
-
Bass Boost: Adds 0-12dB of low-end punch centered at 30-80Hz when you want more impact.
-
Subsonic Filter: Subsonic filter (10-50Hz) removes inaudible ultra-low frequencies that waste power and over-stress subwoofers.
-
Remote Bass Knob: Adjust subwoofer level from the driver seat to match each song and recording.
-
Speaker-Level Inputs: Connects directly to a factory stereo without RCA outputs, making upgrades simpler and more affordable.
-
Protection Circuitry: Built-in thermal, overload, DC output, short circuit, voltage input, clipping protection helps keep the amplifier and your speakers safe during hard use.
-
Status Indicators: Clipping/protect/power LEDs make it easy to confirm the amp is working and spot problems at a glance.
-
Heavy-Gauge Power Terminals: 0 GA power and ground terminals deliver current with minimal loss.
-
High Efficiency: Up to 80% efficiency at 4 ohms turns more of your electrical system into sound and less into heat.
Highlights
1 Channel Subwoofer Monoblock
Class D
1 ~ 4 Ohm Stable
1 x 2000 Watts @ 1 Ohm
Clip/Protection Indicator
Bass Control Knob
Specifications
General
Total Watts (Peak): 6000W
RMS Power @ 4 Ohm: 800W
RMS Power @ 2 Ohm: 1300W
RMS Power @ 1 Ohm: 2000W
Audio
Frequency Response: 10-220Hz
Signal to Noise Ratio: >95dB
Efficiency @ 4 Ohm: 80%
Damping Factor: 220
Input Impedance: 20K ohm
Total Harmonic Distortion (THD): 0.01%
Low Level Input Range: 0.2-6V
High Level Input: Yes
Selectable X-Over: LPF Fixed
X-Over Filter Range: 40-180Hz
Bass Boost Range: 0-12dB
Bass Boost Frequency: 30-80Hz
Infrasonic Filter: 10-50Hz
Phase Selector: No
Features
Amplifier Class: Digital
Amplifier Type: Monoblock Subwoofer
Number of Channels: 1
Minimum Impedance: 1 Ohm
Led Indicator: Clipping/protect/power
Power Input Terminal Size: 0 GA
Fuse Size: 200 A
Remote Level Control: Yes / Dash Mount
Cooling Fan: No
Voltmeter: No
Thermal Protection: Yes
Over-Load Protection: Yes
DC Output Protection: Yes
Short Circuit Output Protection: Yes
Voltage Input Protection: Yes <9 / >16 Volts
Clipping Protection: Yes
Body Color / Finish: Black Aluminum Brush
Measurements
Overall Length: 19.13" / 486mm
Overall Wide: 7.24" / 184mm
Overall Height: 2" / 53mm
Heatsink Length: 17.75" / 451mm
Gross Single Unit Weight: 8.1Lb
Great For
Car Audio
Pro Audio
Motorcycles
Hi-Fi Installation
Off-Road
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
