DS18 ZR1600.4D ZR 4-Channel Class D Amplifier 4 x 400 Watts Rms @ 4-ohm
DS18’s ZR series of amplifiers are guaranteed to supercharge your sound system to deliver brilliant sound and bulky bass frequencies.
The ZR series was designed to pump up the volume and help your speakers reach their maximum potential as a part of your sound system. These amps offer a surplus of tuning options: the ZR1600.4D comes with Lowpass, and Highpass filters to help tune any song to your frequency.
The ZR1600.4D is made to deliver 2 x 1200 watts RMS @ 4-Ohms Bridge, 4 x 680 watts RMS @ 2-Ohms, and 4 x 400 watts RMS @ 4-Ohms giving you the perfect power for your bass.
Features
-
Power Output: Delivers 4 x 400 Watts @ 4 Ohm of clean, continuous power to drive your speakers or subwoofers with authority.
-
Class D Efficiency: The digital Class D design runs cooler and draws less current than traditional amplifiers, so it fits in tight spaces and is easier on your electrical system.
-
2 ohms (Stereo) / 4 ohms (Bridge) Stable: Handles low-impedance loads, giving you more flexibility when wiring multiple speakers or subwoofers for maximum output.
-
Adjustable Crossover: FULL/LPF/HPF crossover adjustable from 40Hz-4KHz lets you send each speaker only the frequencies it plays best.
-
Protection Circuitry: Built-in thermal, overload, DC output, short circuit, voltage input, clipping protection helps keep the amplifier and your speakers safe during hard use.
-
Status Indicators: clipping/protect/power LEDs make it easy to confirm the amp is working and spot problems at a glance.
-
Heavy-Gauge Power Terminals: 0ga power and ground terminals deliver current with minimal loss.
-
High Efficiency: Up to 82% efficiency at 4 ohms turns more of your electrical system into sound and less into heat.
Highlights
4 Channel Full Range
Class D
2 ~ 4 Ohm Stable
4 x 400 Watts @ 4 Ohm
Clip/Protection Indicator
Built in Crossover
Specifications
Power
Total Watts (Peak): 7200W
RMS Power @ 4 ohm: 4 x 400W
RMS Power @ 2 ohm: 4 x 680W
RMS Power @ 4 ohm Bridge: 2 x 1200W
Audio
Frequency Response: 20Hz-20KHz
Signal to Noise Ratio: >90dB
Efficiency @ 4ohm: 82%
Damping Factor: 160
Input Impedance: 20K ohms
Channel Separation: 60dB
Total Harmonic Distortion (THD): 1.00%
Low Level Input Range: 0.2-6V
High Level Input: No
Selectable X-Over: FULL/LPF/HPF
X-Over Filter Range: 40Hz-4KHz
Bass Boost Range: No
Infrasonic Filter: No
Phase Selector: No
Features
Amplifier Class: Digital
Amplifier Type: Stereo Full Range
Number of Channels: 4
Minimum Impedance: 2 ohms (Stereo) / 4 ohms (Bridge)
Led Indicator: clipping/protect/power
Power Input Terminal Size: 0ga
Fuse Size: 280A
Remote Level Control: No
Cooling Fan: No
Voltmeter: No
Thermal Protection: Yes
Over-Load Protection: Yes
DC Output Protection: Yes
Short Circuit Output Protection: Yes
Voltage Input Protection: Yes <9 / >16 Volts
Clipping Protection: Yes
Body Color / Finish: Black Aluminum Brush
Measurements
Overall Length: 12.83" / 326mm
Overall Wide: 7.24" / 184mm
Overall Height: 2" / 53mm
Heatsink Length: 11.45" / 291mm
Gross Single Unit Weight: 6.18 LB
Great For
Car Audio
Pro Audio
Motorcycles
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
