Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
This is a prefabricated box that comes with one of our best selling subwoofers, the ZR12.2D. Included is a beautiful carpeted box with DS18 designs tuned to 29 HZ.
The box is constructed of thick 3/4 MDF for great sound and acoustical resonance. The subwoofer included is the very popular ZR12.2D that is a dual voice coil 2 ohm subwoofer wired in parallel for a final nominal impedance of 1 ohm that will require 800w RMS and 1600 W MAX.
This loaded box is a great solution to get hard hitting heavy bass for all to enjoy. To power this combo, we recommend a 1000w RMS amplifier like the ZR1000.1D to power this setup to its maximum potential.
Features
Power Handling: 800w RMS / 1600w max gives you plenty of headroom for loud, clean playback.
Sensitivity: 84 db sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 20-200 Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 2.5" / 61.6mm Copper voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Foam surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Single 12" Enclosure: Factory-designed enclosure matched to the drivers, tuned to 29 Hz, for deep, efficient bass right out of the box.
Construction: 3/4" (19mm) MDF build for durability and a clean, finished look.
The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass.
One ZR12.2D 12 inch subwoofer that will give you the cone area to push out great sounding bass without a lot of power requirements.
Highlights
ZR Subwoofer Enclosure
1 X 12" ZR12.2D
RMS Power: 800 Watts(1600Watts Peak)
Impedance: 1-Ohm ~ 84dB
3/4" MDF with Black Carpet
29 HZ Ported Box
Specifications
General
Speaker Type / Size: Single 12" / 316mm
Total Impedance: 1 Ohm
Total RMS Power Handling: 800w
Total MAX Power Handling: 1600w
Sensitivity (1w/1m): 84 db
Frequency Response: 20-200 Hz
Recommended Lo Pass Crossover: 70Hz
Speaker Specifications
Voice Coil Diameter: 2.5" / 61.6mm
Voice Coil Former Material: Aluminum
Winding Material: Copper
Cone Material: Non-Pressed Paper
Dust Cap Material: PPI
Surround Material: Foam
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 100 Oz
Box Specifications
Internal Volume: 79.3L / 2.8 ft3
Port Tune FB: 29 Hz
Load Configuration: Ported Box
Box Type: Single 12"
Box Material: 3/4" (19mm) MDF
Finish Material: Black Carpet
-3Db Dropping Point F3: 24 Hz
Measurements
Height: 14.48" / 36.8 cm
Width: 23.14" / 58.8 cm
Depth 1: 17.71" / 45 cm
Depth 2: 19.68" / 50 cm
Gross Single Unit Weight (lb): 68
Great For
Car Audio
Pro Audio
Hi-Fi Installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
This is a prefabricated box that comes with one of our best selling subwoofers, the ZR12.2D. Included is a beautiful carpeted box with DS18 designs tuned to 29 HZ.
The box is constructed of thick 3/4 MDF for great sound and acoustical resonance. The subwoofer included is the very popular ZR12.2D that is a dual voice coil 2 ohm subwoofer wired in parallel for a final nominal impedance of 1 ohm that will require 800w RMS and 1600 W MAX.
This loaded box is a great solution to get hard hitting heavy bass for all to enjoy. To power this combo, we recommend a 1000w RMS amplifier like the ZR1000.1D to power this setup to its maximum potential.
Features
Power Handling: 800w RMS / 1600w max gives you plenty of headroom for loud, clean playback.
Sensitivity: 84 db sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 20-200 Hz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 2.5" / 61.6mm Copper voice coil on an Aluminum former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Foam surround allows controlled cone movement and long-term durability.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Single 12" Enclosure: Factory-designed enclosure matched to the drivers, tuned to 29 Hz, for deep, efficient bass right out of the box.
Construction: 3/4" (19mm) MDF build for durability and a clean, finished look.
The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass.
One ZR12.2D 12 inch subwoofer that will give you the cone area to push out great sounding bass without a lot of power requirements.
Highlights
ZR Subwoofer Enclosure
1 X 12" ZR12.2D
RMS Power: 800 Watts(1600Watts Peak)
Impedance: 1-Ohm ~ 84dB
3/4" MDF with Black Carpet
29 HZ Ported Box
Specifications
General
Speaker Type / Size: Single 12" / 316mm
Total Impedance: 1 Ohm
Total RMS Power Handling: 800w
Total MAX Power Handling: 1600w
Sensitivity (1w/1m): 84 db
Frequency Response: 20-200 Hz
Recommended Lo Pass Crossover: 70Hz
Speaker Specifications
Voice Coil Diameter: 2.5" / 61.6mm
Voice Coil Former Material: Aluminum
Winding Material: Copper
Cone Material: Non-Pressed Paper
Dust Cap Material: PPI
Surround Material: Foam
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 100 Oz
Box Specifications
Internal Volume: 79.3L / 2.8 ft3
Port Tune FB: 29 Hz
Load Configuration: Ported Box
Box Type: Single 12"
Box Material: 3/4" (19mm) MDF
Finish Material: Black Carpet
-3Db Dropping Point F3: 24 Hz
Measurements
Height: 14.48" / 36.8 cm
Width: 23.14" / 58.8 cm
Depth 1: 17.71" / 45 cm
Depth 2: 19.68" / 50 cm
Gross Single Unit Weight (lb): 68
Great For
Car Audio
Pro Audio
Hi-Fi Installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.