DS18 SB12A 12" Loaded Amplified Shallow Subwoofer Enclosure 350 Watts Rms
Subwoofers are a must have for any audio system. Some audio enthusiasts don't have a lot of room for big subs, for example, in single cab trucks. Now we have a option for people craving great bass but don't have much space for it.
The SB12A is a slim 12 inch subwoofer in a sealed box that is powered by a powerful, built in 350w RMS amplifier that is sure to get the bass thumping hard in the minimal space that you have available in your vehicle.
Features
-
Power Handling: 350W RMS / 700W max gives you plenty of headroom for loud, clean playback.
-
Sensitivity: 87dB sensitivity lets it play efficiently on aftermarket or factory power.
-
Frequency Response: 30-250Hz for full, balanced sound across its intended range.
-
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1.75" / 44.43mm EISV voice coil on an Aluminum former handles heat and power for long listening sessions.
-
Cone Material: IPP cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Rubber surround allows controlled cone movement and long-term durability.
-
Rigid Basket: SPCC basket keeps the moving parts aligned under high power.
-
Sealed Box Enclosure: Factory-designed enclosure matched to the drivers for deep, efficient bass right out of the box.
-
Construction: 0.59" MDF build for durability and a clean, finished look.
- Strong slim 12 inch sub that is sure to bring pounding bass where there is not much space.
- Compact sealed box made of .6 inch MDF with included built in 350w RMS 700w max high power amplifier.
- Easy to hook up and integrate with any system with the use of high level inputs or RCA jacks, whichever is easiest for you!
Highlights
Subwoofer Enclosure
1 X 12" Shallow Mount
Amplified with Subwoofer Control Knob
RMS Power: 350 Watts(700 Watts Peak)
Impedance: 2 Ohm ~ 87dB
1/2" MDF with Black Carpet
Specifications
General
Speaker Type / Size: 12" / 312mm
Total Impedance: 2 Ohm
Total RMS Power Handling: 350W
Total MAX Power Handling: 700W
Sensitivity (1w/1m): 87dB
Frequency Response: 30-250Hz
Speaker Specifications
Voice Coil Diameter: 1.75" / 44.43mm
Voice Coil Former Material: Aluminum
Winding Material: EISV
Cone Material: IPP
Surround Material: Rubber
Basket Material: SPCC
Magnet Material: Ferrite
Magnet Weight: 50 Oz
Amplifier Specifications
Amplifier Class: Digital
Amplifier Type: Monoblock Subwoofer
Number of Channels: 1CH
Minimum Impedance: 2 Ohm
Signal to Noise Ratio: 75 dB
Efficiency @ 4ohm: 75%
Total Harmonic Distortion (THD): 0.30%
Low Level Input Range: 0.1-0.6 V
High Level Input: Yes
Selectable X-Over: LPF Fixed
X-Over Filter Range: 51 - 200 Hz
Bass Boost Range: 0-6 dB
Bass Boost Frequency: 50 Hz
Infrasonic Filter: No
Phase Selector: 0-180
Led Indicator: Power / Protection
Power Input Terminal Size: 8 Ga
Fuse Size: 30 A
Remote Level Control: Yes
Cooling Fan: No
Voltmeter: No
Thermal Protection: Yes
Over-Load Protection: Yes
DC Output Protection: Yes
Short Circuit Output Protection: Yes
Voltage Input Protection: Yes (<8v,>16v)
Clipping Protection: No
Box Specifications
Internal Volume: 16L / 0.56ft3
Load Configuration: parallel in
Box Type: Sealed Box
Box Material: 0.59" MDF
Finish Material: NON-Woven fabric
-3Db Dropping Point F3: 45Hz
Measurements
Height: 14.96" / 380mm
Width: 19.3" / 490mm
Depth 1: 4.92" / 125mm
Depth 2: 7.4" / 188mm
Gross Single Unit Weight: 18.7Lb / 8.5KG
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
