DS18 PRO-ZT6 PRO-ZT 6.5" Coaxial Mid-Range Loudspeaker with Water-Resistant Cone Built-in Bullet Tweeter and Grill | 225W RMS 4-Ohm
Experience earth-shaking sound with the PRO-ZT6: a 2-way mid-range built for raw power, and full-range functionality. Packed into a rugged, water-resistant coaxial build.
Insane PowerHandling an RMS power of 225W and a MAX power of 450W, the PRO-ZT6 delivers breathtaking volume and precision. With a 4-Ohm impedance for easy installation and an ultra-high sensitivity rating of 96dB, you’re guaranteed powerful sound output even at lower volumes.
Wide Frequency RangeWith an impressive frequency response range of 65Hz - 22KHz, the PRO-ZT6 captures every nuance across the entire audio spectrum. The integrated neodymium tweeter refines the balance between highs and lows, ensuring you hear every detail of your music.
Deep, Impactful BassEngineered with a robust ferrite magnet, the 6.5" mid-range woofer generates a deep low-end punch, for immersive bass response. This powerful magnet structure enhances voice coil action for dynamic impact every session.
Protective Grill IncludedThe rugged steel mesh grille now comes with an integrated cloth shade. This added layer helps block dust, water spray, and direct sunlight from reaching the cone, protecting internal components and maintaining performance in any conditions.
Transform your system with the PRO-ZT6 and experience music the way it was meant to be heard!
Features
-
Power Handling: 225 watts RMS / 450 Watts max gives you plenty of headroom for loud, clean playback.
-
High Sensitivity: 97dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
-
Frequency Response: 85Hz-20kHz for full, balanced sound across its intended range.
-
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1.5” (38.1 mm) CCAW voice coil on a Kapton former handles heat and power for long listening sessions.
-
Cone Material: Water-Resistant Paper cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Treated Cloth surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: Aluminum Alloy diaphragm delivers crisp, detailed highs.
-
Long Excursion: Xmax of 1.65mm lets the cone move more air for deeper bass.
-
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
-
Mounting Depth: 77 mm (3.03”) mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 100 Hz high-pass filter to protect the speaker and get the cleanest output.
-
Water Resistant: 6.5" Coaxial Water Resistant Mid-Range construction holds up to moisture, making it a good fit for boats, UTVs and motorcycles.
Highlights
6.5" Coaxial Water Resistant Mid-Range
RMS Power: 225 Watts (450 Watts Peak)
Impedance: 4-Ohm
Ferrite & Neodymium Magnets
Grill with Cloth Shade
97dB
Specifications
General
Nominal Diameter: 6.5" (165.1 mm)
Nominal Impedance: 4 ohms
RMS Power Handing: 225 Watts
Maximum Power Handing: 450 Watts
Sensitivity (1w/1m): 97dB
Frequency Response: 85Hz-20kHz
Recommended Hi Pass Crossover: 100 Hz
Motor
Voice Coil Diameter: 1.5” (38.1 mm)
Voice Coil Former Material: Kapton
Winding Material: CCAW
Basket Material: Steel
Magnet Weight: 27 oz
Magnet Material: Ferrite
Cone Material: Water-Resistant Paper
Surround Material: Treated Cloth
Tweeter
Voice Coil Diameter: 1”
Voice Coil Material: KAPTON
Winding Material: CCAW
Diaphragm Material: Aluminum Alloy
Magnet Material: Neodymium (N35H)
Measurements
Overall Diameter: 178 mm (7”)
Front Mount Baffle Cutout: 144 mm (5.67”)
Mounting Depth: 77 mm (3.03”)
Overall Depth: 97mm (3.81”)
Thiele & Small Parameters
Vas: 4.72L / 0.16ft3
Xmax: 1.65mm
Fs: 120Hz
Qms: 5.259
Qes: 0.614
Qts: 0.55
Re: 3.2 Ohms
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
