Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
With strong midrange and clear high frequencies, these speakers deliver a concert-like audio experience without any distortion. Even better, the 1.5” 8-ohms voice coil handles high heat temperatures without breaking a sweat so you can blast your favorite music on a regular basis for extended periods of time.
Order the DS18 PRO-X8BM today to own powerful midrange speakers that will last for years and give an amazing audio experience every time!
Blast Concert-Like Music for Years to Come!
The high 96dB sensitivity of the PRO-X8BM lets you crank up the volume without any sound distortion, while the 115Hz to 16KHz frequency provides richer and more accurate tones that any audiophile will immediately notice. These loudspeakers can also handle up to 275 Watts RMS, making it capable of handling consistent and heavy usage. Put this baby on max volume and enjoy extreme volume levels with crystal clarity!
Features
Power Handling: 275 WATTS RMS / 550 WATTS max gives you plenty of headroom for loud, clean playback.
High Sensitivity: 97dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
Frequency Response: 115Hz - 16KHz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.5" / 38.6mm CCAW voice coil on a Kapton former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Long Excursion: Xmax of 9.3mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Mounting Depth: 3.2" / 82mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
Recommended High-Pass: Use a 120Hz high-pass filter to protect the speaker and get the cleanest output.
Highlights
High-Temp Voice Coil
Aluminum Bullet Tweeter
8-Ohm Load
Steel Basket With Gloss Red Finish
97dB Sensitivity
Specifications
General
Nominal Diameter: 8" / 203mm
Nominal Impedance: 8 ohms
Max Power Handing: 550 WATTS
RMS Power Handing: 275 WATTS
Sensitivity: 97dB
Frequency Response: 115Hz - 16KHz
Recommended Hi Pass: 120Hz
Voice Coil Diameter: 1.5" / 38.6mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Cone Material: Non-Pressed Paper
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 30 oz
Measurements
Overall Diameter: 8.22" / 209mm
Front Mount Baffle Cutout: 7.17" / 182mm
Mounting Depth: 3.2" / 82mm
Overall Depth: 3.5" / 88.6mm
Product Weight: 6.5 lbs
Product Dimensions: 9 x 9 x 3.875
Sold In: Single
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
With strong midrange and clear high frequencies, these speakers deliver a concert-like audio experience without any distortion. Even better, the 1.5” 8-ohms voice coil handles high heat temperatures without breaking a sweat so you can blast your favorite music on a regular basis for extended periods of time.
Order the DS18 PRO-X8BM today to own powerful midrange speakers that will last for years and give an amazing audio experience every time!
Blast Concert-Like Music for Years to Come!
The high 96dB sensitivity of the PRO-X8BM lets you crank up the volume without any sound distortion, while the 115Hz to 16KHz frequency provides richer and more accurate tones that any audiophile will immediately notice. These loudspeakers can also handle up to 275 Watts RMS, making it capable of handling consistent and heavy usage. Put this baby on max volume and enjoy extreme volume levels with crystal clarity!
Features
Power Handling: 275 WATTS RMS / 550 WATTS max gives you plenty of headroom for loud, clean playback.
High Sensitivity: 97dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
Frequency Response: 115Hz - 16KHz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.5" / 38.6mm CCAW voice coil on a Kapton former handles heat and power for long listening sessions.
Cone Material: Non-Pressed Paper cone is stiff and lightweight for accurate, low-distortion sound.
Long Excursion: Xmax of 9.3mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Mounting Depth: 3.2" / 82mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
Recommended High-Pass: Use a 120Hz high-pass filter to protect the speaker and get the cleanest output.
Highlights
High-Temp Voice Coil
Aluminum Bullet Tweeter
8-Ohm Load
Steel Basket With Gloss Red Finish
97dB Sensitivity
Specifications
General
Nominal Diameter: 8" / 203mm
Nominal Impedance: 8 ohms
Max Power Handing: 550 WATTS
RMS Power Handing: 275 WATTS
Sensitivity: 97dB
Frequency Response: 115Hz - 16KHz
Recommended Hi Pass: 120Hz
Voice Coil Diameter: 1.5" / 38.6mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Cone Material: Non-Pressed Paper
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 30 oz
Measurements
Overall Diameter: 8.22" / 209mm
Front Mount Baffle Cutout: 7.17" / 182mm
Mounting Depth: 3.2" / 82mm
Overall Depth: 3.5" / 88.6mm
Product Weight: 6.5 lbs
Product Dimensions: 9 x 9 x 3.875
Sold In: Single
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.