Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
Therefore, DS18 created the PRO-X audio line, which features a wide variety of midranges that produce concert-like sounds that will knock the wind out of you!
Features
Power Handling: 200W RMS / 400W max gives you plenty of headroom for loud, clean playback.
High Sensitivity: 95db sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
Frequency Response: 80Hz - 5KHz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.5" / 38.1mm CCAW voice coil on a Kapton former handles heat and power for long listening sessions.
Cone Material: Non-Pressed cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Cloth surround allows controlled cone movement and long-term durability.
Long Excursion: Xmax of 6.4mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Recommended High-Pass: Use a 130Hz high-pass filter to protect the speaker and get the cleanest output.
DS18's most sold series of High Powered pro audio now offered in SLIM so you can fit them in most tight spaces.
Great DS18 design of high durability parts including strong ferrite magnet, pressed paper cone, and CCA voice coils to get you maximum loudness with great sound quality.
BM stands for BULLET! This includes a resonator (tweeter) with red bullet design to give the speaker a much higher range of frequencies.
General
Nominal Diameter: 6.5" / 165mm
Nominal Impedance: 4 ohms
RMS Power Handling: 200W
MAX Power Handling: 400W
Sensitivity (1w/1m): 95db
Frequency Response: 80Hz - 5KHz
Recommended HI Pass Crossover: 130Hz
Grill Included: No
Motor
Voice Coil Diameter: 1.5" / 38.1mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Cone Material: Non-Pressed
Bullet Material: Aluminum
Bullet Color/Finish: Glossy Red
Surround Material: Cloth
Basket Material: Steel
Basket Finish / Color: Glossy Red
Magnet Material: Ferrite
Magnet Weight: 21 Oz
Thiele & Small Parameters
Equivalent Volume Vas: 4.51L / 0.159ft3
Excursion (one way) Xmax: 6.4mm
Free Air Resonance Fs: 140Hz
Mechanical Factor Qms: 6.59
Electrical Factor Qes: 0.81
Total Factor Qts: 0.72
Mechanical Mass Mms: 6.92g
Mechanical Compliance Cms: 0.19mm/N
BL Factor BL: 4.99
Voice Coil Inductance Le: 0.03mH
Cone Area Sd: 130.7Cm2
DC Resistance Re: 3.3ohms
Great For
Car Audio
Pro Audio
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
Therefore, DS18 created the PRO-X audio line, which features a wide variety of midranges that produce concert-like sounds that will knock the wind out of you!
Features
Power Handling: 200W RMS / 400W max gives you plenty of headroom for loud, clean playback.
High Sensitivity: 95db sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
Frequency Response: 80Hz - 5KHz for full, balanced sound across its intended range.
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1.5" / 38.1mm CCAW voice coil on a Kapton former handles heat and power for long listening sessions.
Cone Material: Non-Pressed cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Cloth surround allows controlled cone movement and long-term durability.
Long Excursion: Xmax of 6.4mm lets the cone move more air for deeper bass.
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
Recommended High-Pass: Use a 130Hz high-pass filter to protect the speaker and get the cleanest output.
DS18's most sold series of High Powered pro audio now offered in SLIM so you can fit them in most tight spaces.
Great DS18 design of high durability parts including strong ferrite magnet, pressed paper cone, and CCA voice coils to get you maximum loudness with great sound quality.
BM stands for BULLET! This includes a resonator (tweeter) with red bullet design to give the speaker a much higher range of frequencies.
General
Nominal Diameter: 6.5" / 165mm
Nominal Impedance: 4 ohms
RMS Power Handling: 200W
MAX Power Handling: 400W
Sensitivity (1w/1m): 95db
Frequency Response: 80Hz - 5KHz
Recommended HI Pass Crossover: 130Hz
Grill Included: No
Motor
Voice Coil Diameter: 1.5" / 38.1mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Cone Material: Non-Pressed
Bullet Material: Aluminum
Bullet Color/Finish: Glossy Red
Surround Material: Cloth
Basket Material: Steel
Basket Finish / Color: Glossy Red
Magnet Material: Ferrite
Magnet Weight: 21 Oz
Thiele & Small Parameters
Equivalent Volume Vas: 4.51L / 0.159ft3
Excursion (one way) Xmax: 6.4mm
Free Air Resonance Fs: 140Hz
Mechanical Factor Qms: 6.59
Electrical Factor Qes: 0.81
Total Factor Qts: 0.72
Mechanical Mass Mms: 6.92g
Mechanical Compliance Cms: 0.19mm/N
BL Factor BL: 4.99
Voice Coil Inductance Le: 0.03mH
Cone Area Sd: 130.7Cm2
DC Resistance Re: 3.3ohms
Great For
Car Audio
Pro Audio
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.