DS18 PRO-ST 1.9" OEM Replacement Neodymium Tweeter | Compatible With Most Toyota and Subaru Vehicles
Introducing an amazing factory replacement speaker for your Subaru or Toyota vehicle that's easy to install and bolts right on as a factory replacement. These speakers were designed to give you a much better audio experience than your OEM speaker setup and also work great on your vehicle's factory amplifier or head unit. These are universal dash speakers that fit on most Subaru and Toyota models that take a 3.5 inch speaker in the dashboard speaker location and will be a night and day difference between your factory speakers.
PRO-ST is compatible with 2011 – 2015 Venza (Dashboard)2004 – 2021 Sienna (Dashboard)2005 – 2015 Tacoma (Door)2015 – 2021 Tacoma (Dashboard)2002 – 2011 Camry (Dashboard)2008 – 2020 Sequoia (Dashboard)2007 – 2020 Tundra (Dashboard)2004 – 2008 Solara (Dashboard)2010 – 2015 Prius (Dashboard)2003 – 2009 4runner (Door)2010 – 2021 4runner (Dashboard)2008 – 2013 Highlander (Dashboard)Subaru:2012 – 2020 Impreza / WRX / STi2014 – 2020 Forester2013 – 2020 CrosstrekNotes:Scion BRZ or Toyota FRS / 86 can be replacing the 3.5” mid and 1” tweeter for this tweeter instead.
Features
-
Power Handling: 100 watts RMS / 200W max gives you plenty of headroom for loud, clean playback.
-
High Sensitivity: 98 dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
-
Frequency Response: 1KHz-20KHz for full, balanced sound across its intended range.
-
Neodymium Magnet: Neodymium delivers a strong magnetic field from a small, lightweight motor for punchy, efficient output.
-
Voice Coil: 1 inch / 25.4 mm CCAW voice coil on a Kapton former handles heat and power for long listening sessions.
-
Tweeter / Driver: PEN diaphragm delivers crisp, detailed highs.
-
Mounting Depth: 1.33" / 34mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 4KHz high-pass filter to protect the speaker and get the cleanest output.
- Easy bolt on solution to get great audio in your factory Subaru's or Toyota's front dash speaker location.
- Designed to work with your factory amplifier or radio for rich and full sound overwhelmingly better than stock.
- Extremely loud DS18 design that never fails to deliver quality, volume, and sound quality for the long haul.
Highlights
1.9" Bullet Compression Tweeter
OEM Plug N Play
RMS Power: 100 Watts(200 Watts Peak)
Impedance: 4 Ohm ~ 98dB
Neodymium Magnet
Flush Style Mount / Pair
Specifications
General
Nominal Diameter: 1"
Nominal Impedance: 4 Ohm
AES Power Handling: 50W
Program Power Handling: 100W
Peak Power Handling: 200W
Sensitivity (1w/1m): 98 dB
Frequency Response: 1KHz-20KHz
Recommended Hi Pass Crossover: 4KHz
Pair or Single: Pair
Motor
Voice Coil Diameter: 1 inch / 25.4 mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Diaphragm Material: PEN
Magnet Material: Neodymium
Magnet Weight: 0.57Oz
Body Material: PC
Measurements
Overall Diameter: 4.41" x 2.68" / 112 x 68 mm
Overall Depth: 1.77" / 45 mm
Front Mount Baffle Cutout: 2.15" / 54.5 mm
Mounting Depth: 1.33" / 34mm
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
