DS18 PRO-HY6.4B PRO 6.5" Coaxial Hybrid Mid-Range Water resistant Cone Loudspeaker with Built-in Driver 225 Watts Rms 4-Ohm
DS18's Hybrid speakers give you the best of both worlds of mids and highs combined into one pro audio combination speaker.
This high powered pro audio mega speaker combines both a 6.5 high volume midrange speaker that also has a high wattage driver attached to the rear to give you a full range of frequencies at an amazingly loud volume.
These Hybrids have water resistant cones to help battle elements and are perfect for people looking to place a high wattage, high volume loudspeaker together without having to separately mount am additional driver.
Features
-
Power Handling: 225W RMS / 450W max gives you plenty of headroom for loud, clean playback.
-
High Sensitivity: 96dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
-
Frequency Response: 100Hz - 20Khz for full, balanced sound across its intended range.
-
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1.5" / 38.6mm CCAW voice coil on a Glass Fiber former handles heat and power for long listening sessions.
-
Cone Material: Water Resistant Paper (IPx5) cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Cloth surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: Titanium diaphragm delivers crisp, detailed highs.
-
Long Excursion: Xmax of 9.2mm lets the cone move more air for deeper bass.
-
Rigid Basket: Aluminum basket keeps the moving parts aligned under high power.
-
Mounting Depth: 3.92" / 99.5mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 120Hz high-pass filter to protect the speaker and get the cleanest output.
-
Grilles Included: Grilles are included to protect the speakers and finish the install.
-
Water Resistant: Water Resistant IPX5 construction holds up to moisture, making it a good fit for boats, UTVs and motorcycles.
-
Serviceable Design: Easily Repaired With The PRO-HY/VC replacement diaphragm, so a blown tweeter does not mean a new speaker.
- Hybrid design combines high wattage midrange and driver together in one beautiful frame.
- High volume 6.5 and 1" driver rated at 225w RMS and 450max for crazy loud volume in a full range of frequencies.
- Water resistant cone to help battle elements and moisture making them great for motorcycles, boats, and regular vehicles too!
Highlights
6.5" Hybrid Coaxial Mid-Range w/Driver
RMS Power: 225 Watts(450 Watts Peak)
Impedance: 4 Ohm
Ferrite & Neodymium Magnets
Water Resistant IPX5
Easily Repaired With The PRO-HY/VC
Specifications
General
Nominal Diameter: 6.5" / 165.1mm
Nominal Impedance: 4 Ohm
RMS Power Handling: 225W
MAX Power Handling: 450W
Sensitivity (1w/1m): 96dB
Frequency Response: 100Hz - 20Khz
Recommended HI Pass Crossover: 120Hz
Number of ways: 2 ways
Pair or Single: Single
Grill Included: Yes
Woofer Specifications
Voice Coil Diameter: 1.5" / 38.6mm
Voice Coil Former Material: Glass Fiber
Winding Material: CCAW
Cone Material: Water Resistant Paper (IPx5)
Surround Material: Cloth
Basket Material: Aluminum
Basket Color/Finish: Glossy Red
Magnet Material: Ferrite
Magnet Weight: 27 Oz
Displacement Volume: 0.047L / 0.0016ft3
Thiele & Small Parameters
Equivalent Volume Vas: 2.21L / 0.078ft3
Excursion (one way) Xmax: 9.2mm
Free Air Resonance Fs: 199Hz
Mechanical Factor Qms: 5.96
Electrical Factor Qes: 1.524
Total Factor Qts: 1.214
Mechanical Mass Mms: 8.654g
Mechanical Compliance Cms: 73.792 mm/N
BL Factor BL: 4.769
Voice Coil Inductance Le: 4.22mH
Cone Area Sd: 145.26 Cm2
DC Resistance Re: 3.2 ohms
Mechanical Mass w/o air Mmd: 6.70g
Driver Specifications
Voice Coil Diameter: 1" / 25.4mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Diaphragm Material: Titanium
Magnet Material: Neodymium
Horn Diameter: 3" / 76.2mm
Speaker Measurement
Overall Diameter: 6.85" / 174mm
Overall Depth: 4.28" / 108.8mm
Front Mount Baffle Cutout: 5.91" / 150mm
Mounting Depth: 3.92" / 99.5mm
Motor Diameter: 4.65" / 118mm
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
