DS18 PRO-HY6.2MSL PRO 6.5" Hybrid Slim Loudspeaker with a 1" Compression Driver Horn | 150W RMS 2-Ohm
Get the best of both worlds with DS18’s PRO-HY6.2MSL. Made for motorcycles, ATVs, UTVs, and Jeeps, this compact loudspeaker brings exceptional audio quality any environment.
Focused on bringing volume to open air applications, this 6.5-inch hybrid loudspeaker features a remarkably high sensitivity rating of 97dB. It features a 2-way system combining a 1.5-inch woofer using advanced KSV and CCAW materials with a driver made from a titanium diaphragm and neodymium magnet for powerful performance. With a frequency range spanning from 120Hz to 20kHz and a recommended crossover of 140Hz high pass, the PRO-HY6.2MSL captures every subtlety of your favorite tracks.
DS18’s PRO-HY6.2MSL stands out thanks to its slim yet durable design, featuring a black steel basket and ferrite magnet that promise longevity even in the most rugged conditions. The neodymium magnet within the 3.15-inch horn further enhances its performance, making it an ideal choice for outdoor enthusiasts who refuse to compromise on sound quality.
Whether mounted on your motorcycle or embedded in your ATV, its compact dimensions (6.55 inches in diameter and 3.26 inches in depth without grill) ensure an easy fit into tight spaces while providing full impact. The included grill offers added protection without sacrificing aesthetic appeal.
Transform your off-road audio system with DS18’s PRO-HY6.2MSL!
Features
-
Power Handling: 150W RMS / 300W max gives you plenty of headroom for loud, clean playback.
-
High Sensitivity: 97dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
-
Frequency Response: 120Hz-20Khz for full, balanced sound across its intended range.
-
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1.5" / 38.6mm CCAW voice coil on a KSV former handles heat and power for long listening sessions.
-
Cone Material: Paper cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Cloth surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: Titanium diaphragm delivers crisp, detailed highs.
-
Long Excursion: Xmax of 1.5mm lets the cone move more air for deeper bass.
-
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
-
Mounting Depth: 2.82" / 72mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 140Hz high-pass filter to protect the speaker and get the cleanest output.
-
Grilles Included: Grilles are included to protect the speakers and finish the install.
-
Water Resistant: IP65 Rated + Grille w/ Water/Sun Protection Cloth construction holds up to moisture, making it a good fit for boats, UTVs and motorcycles.
Highlights
6.5" Slim Hybrid Loudspeaker
150W RMS / 300W MAX
1" Titanium Compression Driver
IP65 Rated + Grille w/ Water/Sun Protection Cloth
Neodymium Driver Magnet / Ferrite Woofer Magnet
Mounting Depth: 2.82"
Specifications
General
Nominal Diameter: 6.5" / 165.1mm
Nominal Impedance: 2 Ohms
RMS Power Handling: 150W
MAX Power Handling: 300W
Sensitivity (1w/1m): 97dB
Frequency Response: 120Hz-20Khz
Recommended HI Pass Crossover: 140Hz
Number of Ways: 2 ways
Pair or Single: Single
Grill Included: Yes
Woofer
Voice Coil Diameter: 1.5" / 38.6mm
Voice Coil Former Material: KSV
Winding Material: CCAW
Cone Material: Paper
Surround Material: Cloth
Basket Material: Steel
Basket Color/Finish: Black
Magnet Material: Ferrite
Magnet Weight: 19.5 Oz
Thiele & Small Parameters
Equivalent Volume Vas: 7L / 0.248ft3
Excursion (one way) Xmax: 1.5mm
Free Air Resonance Fs: 163Hz
Mechanical Factor Qms: 7.488
Electrical Factor Qes: 1.102
Total Factor Qts: 0.96
Mechanical Mass Mms: 2.87g
Mechanical Compliance Cms: 0.333mm/N
BL Factor BL: 2.287
Voice Coil Inductance Le: 0.07041mH
Cone Area Sd: 136.8 Cm2
DC Resistance Re: 1.9 ohm
Mechanical Mass w/o air Mmd: 20.7g
Driver Specifications
Voice Coil Diameter: 1" / 25.4mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Diaphragm Material: Titanium
Magnet Material: Neodymium
Horn Diameter: 3.15" / 80mm
Speaker Measurement
Overall Diameter (Without Grill): 6.55" / 167mm
Overall Diameter (With Grill): 6.93" / 176mm
Overall Depth (Without Grill): 3.26" / 83mm
Overall Depth (With Grill): 3.45" / 88mm
Front Mount Baffle Cutout: 5.65" / 144mm
Mounting Depth: 2.82" / 72mm
Motor Diameter: 4.31" / 110mm
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
