DS18 IXS10.2D IXS Shallow-Mount 10" Fiber Glass Subwoofer 600 Watts Rms DVC 2-Ohm
DS18’s IXS Line of Shallow Mount Subwoofers are back with the IXS10.2D!
Built from our best selling SW slim subwoofer line the experts at DS18 took the SW line and made it even beefier for more bass.
This sub handles 600 W RMS and 1200 W MAX Power with a 84 dB sensitivity: high sensitivity for a shallow mount sub raising this model above and beyond the standard.
These Dual Voice Coil Subs are perfect for the listener looking to add more thump to their system.
Make the most of your space with the IXS10.2D!
Features
-
Power Handling: 600w RMS / 1200w max gives you plenty of headroom for loud, clean playback.
-
Sensitivity: 84 dB sensitivity lets it play efficiently on aftermarket or factory power.
-
Frequency Response: 20 - 800 Hz for full, balanced sound across its intended range.
-
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 2.5" / 63.5mm Copper voice coil on an Aluminum former handles heat and power for long listening sessions.
-
Cone Material: Paper cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Stitched rubber surround allows controlled cone movement and long-term durability.
-
Rigid Basket: Aluminum basket keeps the moving parts aligned under high power.
-
Mounting Depth: 3.66" / 93 mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
- IXS series was made to produce more bass than other shallow mount subs of it rating in ported or sealed boxes.
- Large surround with flexible spider packs will help the CCA voice coil reach the highest Xmax per watt which produces full and deep bass with the correct box spec.
- Shallow mount size will let you fit this sub in compact places and requires less box space than other subs its size giving you many options in which to place it.
Highlights
10" Shallow Subwoofer
MAX Power: 1200 Watts
RMS Power: 600 Watts
Impedance: 2-Ohm 2.5" DVC
Ferrite Magnet
84dB
Specifications
General
Nominal Diameter: 10" / 254mm
Nominal Impedance: 2+2 ohms
RMS Power Handling: 600w
Maximum Power Handling: 1200w
Sensitivity (1w/1m): 84 dB
Frequency Response: 20 - 800 Hz
Recommended Lo Pass Crossover: 90 Hz
Motor
Voice Coil Diameter: 2.5" / 63.5mm
Voice Coil Former Material: Aluminum
Winding Material: Copper
Cone Material: Paper
Dust Cap Material: Fiberglass
Surround Material: Stitched rubber
Basket Material: Aluminum
Basket Color/Finish: Corrugated Black
Magnet Material: Ferrite
Magnet Weight: 62 Oz
Displacement Volume: 0.9L / 0.032ft3
Thiele & Small Parameters
Equivalent Volume Vas: 13.95L / 0.49ft3
Free Air Resonance Fs: 38 Hz
Mechanical Factor Qms: 5.88
Electrical Factor Qes: 0.87
Total Factor Qts: 0.76
Moving Mass Mms: 200 g
Compliance Cms: 88.46 mm/N
Bl Factor BI: 13.97
Voice Coil Inductance Le: 4.58 mH
Diaphragm Area Sd: 333.29 cm2
DC Resistance Re: 1.8+1.8 ohms
Efficiency Bandwidth Product EBP: 43.6
Recommended Enclosures
Sealed Internal Volume (minimum): 14.2L / 0.5ft3
Sealed Box Output Response F3: 44Hz
Measurements
Overall Diameter: 10.63" / 270 mm
Overall Depth: 4.48" / 114 mm
Front Mount Baffle Cutout: 9.25" / 235 mm
Mounting Depth: 3.66" / 93 mm
Motor Diameter: 6" / 154 mm
Gross Single Unit Weight (lb): 15
Great For
Car Audio
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
