Our certified installers are true automotive enthusiasts. Their work is their passion and for jobs big or small, simple or complex, there's no better way to go.
The power, clarity, and range everyone who likes it LOUD loves about the GEN-X series returns in a speaker equipped with an extremely durable steel basket to outlast any vehicle it’s installed in.
The G6.9Xi was made for amplifiers, but can be used in factory settings with 4-ohm factory amplifiers in most cases for great sound and clarity over factory OEM speakers.
The Mylar Balanced Dome Tweeters included in this coaxial help it achieve the highest range of frequencies possible, while the speaker itself reaches frequencies as low as 35Hz. The 3-way design on these speakers bring a full range of frequencies with great response without the need for a large power requirement.
These speakers get loud extremely easily with a MAX Power Handling of 180W and RMS Power Handling of 60W.
Order the G6.9Xi for your system to expand your soundstage today!
Features
Power Handling: 60W RMS / 180W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 86dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 35Hz-20KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1" / 25.5mm EISV voice coil on an ASV former handles heat and power for long listening sessions.
Cone Material: Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
General
Nominal Diameter: 6X9" / 152x228mm
Nominal Impedance: 4 Ohms
RMS Power Handling: 60W
Maximum Power Handling: 180W
Sensitivity (1w/1m): 86dB
Frequency Response: 35Hz-20KHz
Recommended HI Pass Crossover: 50Hz
Number of ways: 3
Pair or single: Pair
Grill Included: Yes
Woofer
Voice Coil Diameter: 1" / 25.5mm
Voice Coil Former Material: ASV
Winding Material: EISV
Cone Material: Paper
Surround Material: Rubber
Basket Material: Steel
Basket Color/Finish: Black Matte
Magnet Material: Barium Ferrite
Magnet Weight: 15.7Oz / 445g
Thiele & Small Parameters
Equivalent Volume Vas: 14.3L / 0.5ft3
Excursion (one way) Xmax: 3.3mm
Free Air Resonance Fs: 68Hz
Mechanical Factor Qms: 4.8
Electrical Factor Qes: 1.97
Total Factor Qts: 1.4
Mechanical Mass Mms: 23.8g
Mechanical Compliance Cms: 248mm/N
BL Factor BL: 4.2
Voice Coil Inductance Le: 197uH
Cone Area Sd: 202cm2
DC Resistance Re: 3.7 Ohms
Mechanical Mass w/o air Mmd: 20.5g
Speaker Measurements
Overall Diameter: 6.4" x 9.2" / 163 x 234mm
Overall Depth: 3.85" / 97.8mm
Overall Diameter (With Grill): 7.24" x 10.4" / 184 x 264mm
Overall Depth (With Grill): 4.15" / 105.5mm
Front Mount Baffle Cutout: 5.9 x 8.66" / 150 x 220mm
Mounting Depth: 2.95" / 75mm
Motor Diameter: 4.17" / 106mm
Tweeter Protrusion: 0.9" / 22.8mm
Gross Single Unit Weight: 1.25KG
Great For
Hi-Fi installation
Car audio
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
The power, clarity, and range everyone who likes it LOUD loves about the GEN-X series returns in a speaker equipped with an extremely durable steel basket to outlast any vehicle it’s installed in.
The G6.9Xi was made for amplifiers, but can be used in factory settings with 4-ohm factory amplifiers in most cases for great sound and clarity over factory OEM speakers.
The Mylar Balanced Dome Tweeters included in this coaxial help it achieve the highest range of frequencies possible, while the speaker itself reaches frequencies as low as 35Hz. The 3-way design on these speakers bring a full range of frequencies with great response without the need for a large power requirement.
These speakers get loud extremely easily with a MAX Power Handling of 180W and RMS Power Handling of 60W.
Order the G6.9Xi for your system to expand your soundstage today!
Features
Power Handling: 60W RMS / 180W max gives you plenty of headroom for loud, clean playback.
Sensitivity: 86dB sensitivity lets it play efficiently on aftermarket or factory power.
Frequency Response: 35Hz-20KHz for full, balanced sound across its intended range.
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
Voice Coil: 1" / 25.5mm EISV voice coil on an ASV former handles heat and power for long listening sessions.
Cone Material: Paper cone is stiff and lightweight for accurate, low-distortion sound.
Surround: Rubber surround allows controlled cone movement and long-term durability.
General
Nominal Diameter: 6X9" / 152x228mm
Nominal Impedance: 4 Ohms
RMS Power Handling: 60W
Maximum Power Handling: 180W
Sensitivity (1w/1m): 86dB
Frequency Response: 35Hz-20KHz
Recommended HI Pass Crossover: 50Hz
Number of ways: 3
Pair or single: Pair
Grill Included: Yes
Woofer
Voice Coil Diameter: 1" / 25.5mm
Voice Coil Former Material: ASV
Winding Material: EISV
Cone Material: Paper
Surround Material: Rubber
Basket Material: Steel
Basket Color/Finish: Black Matte
Magnet Material: Barium Ferrite
Magnet Weight: 15.7Oz / 445g
Thiele & Small Parameters
Equivalent Volume Vas: 14.3L / 0.5ft3
Excursion (one way) Xmax: 3.3mm
Free Air Resonance Fs: 68Hz
Mechanical Factor Qms: 4.8
Electrical Factor Qes: 1.97
Total Factor Qts: 1.4
Mechanical Mass Mms: 23.8g
Mechanical Compliance Cms: 248mm/N
BL Factor BL: 4.2
Voice Coil Inductance Le: 197uH
Cone Area Sd: 202cm2
DC Resistance Re: 3.7 Ohms
Mechanical Mass w/o air Mmd: 20.5g
Speaker Measurements
Overall Diameter: 6.4" x 9.2" / 163 x 234mm
Overall Depth: 3.85" / 97.8mm
Overall Diameter (With Grill): 7.24" x 10.4" / 184 x 264mm
Overall Depth (With Grill): 4.15" / 105.5mm
Front Mount Baffle Cutout: 5.9 x 8.66" / 150 x 220mm
Mounting Depth: 2.95" / 75mm
Motor Diameter: 4.17" / 106mm
Tweeter Protrusion: 0.9" / 22.8mm
Gross Single Unit Weight: 1.25KG
Great For
Hi-Fi installation
Car audio
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.