DS18 G6.5XC GEN-X 6.5" 2-Way Component Set Speaker System 150 Watts 4-Ohm
The power, clarity, and range everyone who likes it LOUD loves about the GEN-X series returns in an extremely durable steel basket protected by a (PC-ABS) Grill for a speaker that will outlast any vehicle its installed in.
The G6.5Xi was made for amplifiers, but can be used in factory settings with 4-ohm factory amplifiers in most cases for great sound and clarity over factory OEM speakers.
The 2-way design on these speakers bring a full range of frequencies with great response without the need for a large power requirement.
The extremely loud design of the component speaker set with included tweeter and passive crossover will bring a full range of frequencies all listeners are sure to notice. The GEN-X series is one of the best choices among casual everyday listeners and the most enthusiastic of audiophiles
These speakers get loud extremely easily with a MAX Power Handling of 150W and RMS Power Handling of 50W.
Order the G6.5Xi for your system to expand your soundstage today!
Features
-
Power Handling: 50watts RMS / 150Watts max gives you plenty of headroom for loud, clean playback.
-
Sensitivity: 86dB sensitivity lets it play efficiently on aftermarket or factory power.
-
Frequency Response: 35Hz-20KHz for full, balanced sound across its intended range.
-
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1" / 25.5mm EISV voice coil on an ASV former handles heat and power for long listening sessions.
-
Cone Material: Paper cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Rubber surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: Silk diaphragm delivers crisp, detailed highs.
-
Long Excursion: Xmax of 2.7mm lets the cone move more air for deeper bass.
-
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
-
Recommended High-Pass: Use a 60HZ high-pass filter to protect the speaker and get the cleanest output.
-
Grilles Included: Grilles are included to protect the speakers and finish the install.
- 2-Way Design implemented for full range quality on every listen
- Rubber surrounds with treated paper cones for great volume and sensitivity to power ratio
- Included Grills to protect your speakers as well as great looks to blend in to any vehicle
Highlights
6.5" 2-Way Component
MAX Power: 150 Watts
RMS Power: 50 Watts
Impedance: 4 Ohm ~ 86db
Barium Ferrite & Neodymium Magnets
Pair ~ Crossovers & Grills Included
Specifications
General
Nominal Diameter: 6.5" / 165mm
Nominal Impedance: 4 Ohms
RMS Power Handling: 50Watts
MAX Power Handling: 150Watts
Sensitivity (1w/1m): 86dB
Frequency Response: 35Hz-20KHz
Recommended Hi Pass Crossover: 60HZ
Number of Ways: 2
Pair or Single: Pair
Grill Included: Yes
Motor
Voice Coil Diameter: 1" / 25.5mm
Voice Coil Former Material: ASV
Winding Material: EISV
Cone Material: Paper
Surround Material: Rubber
Basket Material: Steel
Basket Color: Black Matte
Magnet Material: Barium Ferrite
Magnet Weight: 9.87oz / 280g
Tweeter
Voice Coil Diameter: 1" / 25.5mm
VC Former Material: ASV
Winding Material: EISVM
Diaphragm Material: Silk
Magnet Material: Neodymium
Magnet Weight: 8.7g
Thiele & Small Parameters
Vas: 9.47L / 0.33ft3
Xmax: 2.7mm
Fs: 72Hz
Qms: 4.5
Qes: 1.47
Qts: 1.1
Mms: 13.8g
Cms: 345mm/N
BL: 4
Le: 172uH
Sd: 136.8cm2
Re: 3.7 Ohms
Mmd: 12g
Crossover
Passive Crossover Ways: 2 (Woofer / Tweeter)
Frequency Crossover Point: 3.5KHz
Power Handling: 400W
Cut-Off Slope: 12dB/Oct
Capacitor Type: Metal Film
Coil Type: Inductor
Terminal Type: Screw
Housing Material: ABS
Great For
Hi-Fi installation
Car audio
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
