DS18 G4.6Xi GEN-X 4x6 2-Way Coaxial Speakers 45 Watts Rms 4-Ohm
The power, clarity and range everyone who likes it LOUD loves about the GEN-X series returns in a speaker equipped with an extremely durable steel basket to outlast any vehicle it’s installed in.
The G4.6Xi was made for amplifiers, but can be used in factory settings with 4-ohm factory amplifiers in most cases for great sound and clarity over factory OEM speakers.
The Mylar Balanced Dome Tweeters included in this coaxial help it achieve the highest range of frequencies possible, while the speaker itself reaches frequencies as low as 45Hz. The 2-way design on these speakers bring a full range of frequencies with great response without the need for a large power requirement.
The G4.6Xi is plate mounted and has multiple mounting holes to accommodate many factory placements.
These speakers get loud extremely easily with a MAX Power Handling of 135W and RMS Power Handling of 45W.
Order the G4.6XI for your system to expand your soundstage today!
Features
-
Power Handling: 45W RMS / 135W max gives you plenty of headroom for loud, clean playback.
-
Sensitivity: 84dB sensitivity lets it play efficiently on aftermarket or factory power.
-
Frequency Response: 45Hz-20KHz for full, balanced sound across its intended range.
-
Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1" / 25.5mm EISV voice coil on an ASV former handles heat and power for long listening sessions.
-
Cone Material: Paper cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Rubber surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: Mylar diaphragm delivers crisp, detailed highs.
-
Long Excursion: Xmax of 2.2mm lets the cone move more air for deeper bass.
-
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
-
Mounting Depth: 1.7" / 43mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 80Hz high-pass filter to protect the speaker and get the cleanest output.
- 2-Way Design implemented for full range quality on every listen
- Rubber surrounds with treated paper cones for great volume and sensitivity to power ratio
Highlights
4X6" 2-Way Coaxial
MAX Power: 135 Watts
RMS Power: 45 Watts
Impedance: 4 Ohm
Barium Ferrite & Neodymium Magnets
Pair ~ 84dB
Specifications
General
Nominal Diameter: 4x6" / 101x152mm
Nominal Impedance: 4 Ohms
RMS Power Handling: 45W
Maximum Power Handling: 135W
Sensitivity (1w/1m): 84dB
Frequency Response: 45Hz-20KHz
Recommended HI Pass Crossover: 80Hz
Number of ways: 2
Pair or single: Pair
Grill Included: No
Woofer
Voice Coil Diameter: 1" / 25.5mm
Voice Coil Former Material: ASV
Winding Material: EISV
Cone Material: Paper
Surround Material: Rubber
Basket Material: Steel
Basket Color/Finish: Black Matte
Magnet Material: Barium Ferrite
Magnet Weight: 6.3Oz / 180g
Thiele & Small Parameters
Equivalent Volume Vas: 1.8L / 0.063ft3
Excursion (one way) Xmax: 2.2mm
Free Air Resonance Fs: 115Hz
Mechanical Factor Qms: 4.3
Electrical Factor Qes: 2.3
Total Factor Qts: 1.5
Moving Mass Mms: 9.4g
Compliance Cms: 195mm/N
Bl Factor Bl: 3.1
Voice Coil Inductance Le: 151uH
Cone Area Sd: 84.3cm2
DC Resistance Re: 3.7 Ohms
Moving Mass without Air Mmd: 8.5g
Tweeter
Nominal Diameter: 1" / 25.5mm
Voice Coil Diameter: 0.5" / 13.25mm
Voice Coil Former Material: ASV
Winding Material: EISVM
Diaphragm Material: Mylar
Magnet Material: Neodymium
Magnet Weight: 1.8g
Measurements
Overall Diameter: 4" x 6.1" / 102 x 155mm
Overall Depth: 2.18" / 55.3mm
Front Mount Baffle Cutout: 3.6" x 5.94" / 93 x 151mm
Mounting Depth: 1.7" / 43mm
Motor Diameter: 3" / 76mm
Tweeter Protrusion: 0.48" / 12.3mm
Gross Single Unit Weight: 0.45KG
Great For
Car Audio
Hi-Fi installation
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
