DS18 G1000.4D GEN-X Full-Range Class D 4-Channel Amplifier | 4 x 90W RMS @ 4-Ohm
DS18’s GEN-X Series has a successor and is guaranteed to boost all systems to the top-of-the-line performance! The brand new G1000.4D is designed for the competitor and enthusiast on the journey to creating the system of their dreams!
The G1000.4D delivers pure power with unmatched reliability and efficiency so you can trust the heart of your system will never give out.
As a Class D amplifier, the G1000.4D uses Class D circuitry components significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The DS18 G1000.4D is a compact full-range Class D 4-channel amplifier delivering up to 1000W MAX, making it a great choice for powering mid-bass drivers, mid-range speakers, vocals, and highs with strong, clean output in a space-saving design.
Protect your equipment effectively with Protection, Clipping, and Power Indicator LED’s that notify you when your amplifier has reached it’s limit!
The G1000.4D has a power output of 300W x 2 CH bridged at 4-ohms, 150W x 4 CH at 2-ohms, 90W x 4 CH at 4-ohms: perfect power settings to supercharge any custom build.
Features
-
Power Output: Delivers 4 x 300 Watts @ 4 Ohm of clean, continuous power to drive your speakers or subwoofers with authority.
-
Class D Efficiency: The digital Class D design runs cooler and draws less current than traditional amplifiers, so it fits in tight spaces and is easier on your electrical system.
-
2 Ohm St / 4 Ohm Bridge Stable: Handles low-impedance loads, giving you more flexibility when wiring multiple speakers or subwoofers for maximum output.
-
Adjustable Crossover: LPF/FLAT/HPF crossover adjustable from 50 - 250Hz lets you send each speaker only the frequencies it plays best.
-
Protection Circuitry: Built-in thermal, voltage input, clipping protection helps keep the amplifier and your speakers safe during hard use.
-
Status Indicators: Power / Protection / Clip LEDs make it easy to confirm the amp is working and spot problems at a glance.
-
Heavy-Gauge Power Terminals: 4GA power and ground terminals deliver current with minimal loss.
-
High Efficiency: Up to 80% efficiency at 4 ohms turns more of your electrical system into sound and less into heat.
- Small and powerful design so you can power your subs with great efficiency and power without taking up much space
- High quality terminals that look great and will transfer your power and signal with no loss.
Highlights
4 Channel Full Range
Class D
2 ~ 4 Ohm Stable
4 x 300 Watts @ 4 Ohm
Power/Protection/Clip Indicator
Built in Crossover
Specifications
General
Class: Digital (D)
Amplifier Type: 4 CH Full Range
Channels: 4 CH
Peak Power: 3600W
RMS Power @ 4 Ohm/14.4V: 4 x 300W
RMS Power @ 2 Ohm/14.4V: 4 x 420W
RMS Power @ 4 Ohm/14.4V Bridged: 2 x 740W
Minimum Impedance: 2 Ohm St / 4 Ohm Bridge
Operation Voltage: 9 - 15V
Frequency Response: 20Hz-20KHz
Signal/Noise Ratio: >90dB
Low Pass Filter: 50Hz - 250Hz
High Pass Filter: 50Hz - 250Hz
Subsonic: NO
Efficiency @ 4 Ohm: 80%
Damping Factor: 78
THD %: 0.01
Input Sensitivity: 0.25V - 6V
X-Over Filter Range: 50 - 250Hz
Phase Selector: NO
High Level Input: NO
Selectable X-Over: LPF/FLAT/HPF
Led Indicator: Power / Protection / Clip
Voltage Input Protection: Yes
Clipping Protection: Yes
Thermal Protection: Yes
Cooling Fan: No
Speaker Output Size: 12GA
Power Input Size: 4GA
Fuse Rating: 120A
Remote Level Control: No
Body Color / Finish: Matte black
Measurements
Product Weight (lb): 4.5
Product Dimensions L x W x H (Inches): 13.75 x 6.25 x 3.25
Sold In: Single
Great For
Car Audio
Pro Audio
Motorcycles
Hi-Fi Installation
Off-Road
DIY Projects
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
