DS18 EXL-SQ4.6 EXL 4x6” 2-Way Coaxial Speaker with Fiber Glass Cone | 60W RMS 3-Ohm
The EXL-SQ4.6 is your new weapon of choice for smooth detail that slices through road noise with ease.
Tuned for PrecisionHandling up 60W RMS and 260W MAX, the EXL-SQ4.6 transforms any ride into a rolling soundstage. With a frequency response from 80Hz to 22kHz, you’ll hear every detail like never before.
Built with PurposeThe EXL-SQ4.6’s glass fiber cone and rubber surround deliver responsive low-end with pro-grade clarity. The 1” ASV voice coil stays cool under pressure, while the 9oz barium magnet drives smooth, consistent sound.
Clear Highs That Cut ThroughEquipped with a 0.8” neodymium tweeter and a Mylar diaphragm, the highs stay bright and distortion-free — even at high speeds.
Rugged by DesignHoused in a black steel basket, the EXL-SQ4.6 is built tough for the road. And yes, the grilles are included.
Level up your setup with DS18’s EXL-SQ4.6!
Features
-
Power Handling: 60W RMS / 260W max gives you plenty of headroom for loud, clean playback.
-
Sensitivity: 87 dB sensitivity lets it play efficiently on aftermarket or factory power.
-
Frequency Response: 80Hz - 22KHz for full, balanced sound across its intended range.
-
Barium Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1? / 25.5mm Copper voice coil on an ASV former handles heat and power for long listening sessions.
-
Cone Material: Glass Fiber cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Rubber surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: Mylar diaphragm delivers crisp, detailed highs.
-
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
-
Mounting Depth: 2.15" / 54.8mm mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 100Hz high-pass filter to protect the speaker and get the cleanest output.
Highlights
4x6" 2-Way Coaxial
MAX Power: 260 Watts
RMS Power: 60 Watts
Impedance: 3-Ohm
Barium & Neodymium Magnets
Pair ~ 87dB
Specifications
General
Nominal Diameter: 4x6" / 101.6x152.4mm
Nominal Impedance: 3 ohm
RMS Power Handling: 60W
MAX Power Handling: 260W
Sensitivity (1w/1m): 87 dB
Frequency Response: 80Hz - 22KHz
Recommended HI Pass Crossover: 100Hz
Number of ways: 2-way
Pair or Single: Pair
Grill Included: No
Woofer
Voice Coil Diameter: 1? / 25.5mm
Voice Coil Former Material: ASV
Winding Material: Copper
Cone Material: Glass Fiber
Surround Material: Rubber
Basket Material: Steel
Basket Color/Finish: Black
Magnet Material: Barium
Magnet Weight: 9 Oz
Thiele & Small Parameters
Equivalent Volume: 3.6L / 0.12ft3
Free Air Resonance: 96Hz
Mechanical Factor: 4.964
Electrical Factor: 1.136
Total Factor: 0.924
DC Resistance: 2.8 ohm
Tweeter
Nominal Diameter: 0.8? / 20.3mm
Voice Coil Diameter: 0.5" / 13mm
Diaphragm Material: Mylar
Magnet Material: Neodymium
Speaker Measurement
Overall Diameter: 4x6" / 102x155mm
Overall Depth: 2.37" / 60.4mm
Front Mount Baffle Cutout: 3.5x5.5" / 91x140mm
Mounting Depth: 2.15" / 54.8mm
Motor Diameter: 3.14" / 80mm
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
