DS18 PRO-ZT69 PRO-ZT 6x9" Coaxial Mid-Range Loudspeaker with Water-Resistant Cone Built-in Bullet Tweeter and Grill | 275W RMS 4-Ohm
6x9” Water Resistant Mid-Range Loudspeaker with Built-in Bullet Tweeter and Grill 550W 4-Ohm
Experience earth-shaking sound with the PRO-ZT69: a 2-way mid-range built for raw power, accurate reproduction, and crystal-clear clarity across the entire frequency range. Packed into a rugged, water-resistant coaxial build.
Insane PowerHandling an RMS power of 275W and a MAX power of 550W, the PRO-ZT69 reaches volumes that will take your breath away. With a 4-Ohm impedance for easy installation and an ultra-sensitive 98dB rating, you’re guaranteed powerful output at lower power levels.
Wide Frequency RangeWith an impressive frequency response of 60Hz - 22KHz, the PRO-ZT69 captures every nuance across the entire audio spectrum. The integrated neodymium tweeter refines the balance between highs and lows, ensuring you hear every detail of your music.
Deep, Impactful BassEngineered with a robust ferrite magnet, the 6x9" mid-range woofer generates a deep low-end punch, for immersive bass response. This powerful magnet structure enhances voice coil action for forceful impact in your low-end.
Protective Grill IncludedThe rugged steel mesh grille now comes with an integrated cloth shade. This added layer helps block dust, water spray, and direct sunlight from reaching the cone, protecting internal components and maintaining performance in any conditions.
Transform your system with the PRO-ZT69 and experience audio the way it was meant to be heard!
Features
-
Power Handling: 275 watts RMS / 550 Watts max gives you plenty of headroom for loud, clean playback.
-
High Sensitivity: 98dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.
-
Frequency Response: 60Hz-22KHz for full, balanced sound across its intended range.
-
Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output.
-
Voice Coil: 1.5” (38.1 mm) CCAW voice coil on a Kapton former handles heat and power for long listening sessions.
-
Cone Material: Water-Resistant Paper cone is stiff and lightweight for accurate, low-distortion sound.
-
Surround: Treated Cloth surround allows controlled cone movement and long-term durability.
-
Tweeter / Driver: ALUMINUM ALLOY diaphragm delivers crisp, detailed highs.
-
Long Excursion: Xmax of 16 mm lets the cone move more air for deeper bass.
-
Rigid Basket: Steel basket keeps the moving parts aligned under high power.
-
Mounting Depth: 85 mm (3.35”) mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.
-
Recommended High-Pass: Use a 80 Hz high-pass filter to protect the speaker and get the cleanest output.
-
Water Resistant: 6X9" Coaxial Water Resistant Mid-Range construction holds up to moisture, making it a good fit for boats, UTVs and motorcycles.
Highlights
6X9" Coaxial Water Resistant Mid-Range
RMS Power: 275 Watts (550W Peak)
Impedance: 4-Ohm
Ferrite & Neodymium Magnets
Grill with Cloth Shade
98dB
Specifications
General
Nominal Diameter: 6x9”
Nominal Impedance: 4 ohms
RMS Power Handing: 275 Watts
Maximum Power Handing: 550 Watts
Sensitivity (1w/1m): 98dB
Frequency Response: 60Hz-22KHz
Recommended Hi Pass Crossover: 80 Hz
Midrange
Voice Coil Diameter: 1.5” (38.1 mm)
Voice Coil Former Material: Kapton
Winding Material: CCAW
Basket Material: Steel
Magnet Weight: 27 oz
Magnet Material: Ferrite
Cone Material: Water-Resistant Paper
Surround Material: Treated Cloth
Tweeter
Voice Coil Diameter: 1”
Voice Coil Material: KAPTON
Winding Material: CCAW
Diaphragm Material: ALUMINUM ALLOY
Magnet Weight: 0.44 oz
Magnet Material: NEODYMIUM (N38H)
Thiele & Small Parameters
Vas: 14.6927 LTR
Xmax: 16 mm
Fs: 85 Hz
Qms: 3.906
Qes: 0.639
Qts: 0.549
Re: 3.2 ohms
Measurements
Overall Diameter: 260 x 180 mm (10.24 x 7.09”)
Front Mount Baffle Cutout: 219 x 150 mm (8.62 x 5.91”)
Mounting Depth: 85 mm (3.35”)
Overall Depth: 97 mm ( 3.81”)
Professional Installation
Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.
