Kicker 11HS8 Hideaway 8" Compact Powered Subwoofer - Open Box
KICKER's legendary subwoofer technology continues to lead the way for clear-sounding, ground-pounding bass in a vehicle.
Compact Performer KICKER's legendary subwoofer technology continues to lead the way for clear-sounding, ground-pounding bass in a vehicle. It's incorporated into KICKER's latest bass machine, the brand's first compact powered subwoofer and an International Consumer Electronics Show (CES) Innovations award winner for design and engineering.
Plug-and-Play Bass The KICKER Hideaway Compact Powered Subwoofer delivers surprising low frequency output from a remarkably small enclosure, setting a new standard in plug-and-play bass performance and convenience in a vehicle. At just over three inches high and nearly 14 inches long, the Hideaway combines a 150-watt amplifier and an 8-inch subwoofer to add thumping bass to any vehicle from the tightest locations. It also provides a quick-connect power plug and Velcro-fastened nylon straps for secure installation and simple but fast removal.
Mr. Irby's Recipe - FOR BASS! KICKER Senior Vice President Charlie Schultz said, "Our president Steve Irby was intimately involved in the design process with the KICKER Research and Development team, and they nailed it with the Hideaway Powered Subwoofer."
"The output is amazing," said Irby during listening tests.
Feature Full The quick-connect Molex® plug and harness entails power, signal and remote turn-on. The Hideaway comes with a remote bass control for fine-tuning bass levels, adjustable low-pass crossover, variable +6dB bass boost, phase-cancelling switch for max output and two automatic turn-on options. It also features high- and low-level inputs for integration with nearly any factory or aftermarket head unit.
Specifications
Subwoofer (in, cm): 8, 20
RMS power (watts), 14.4V: 150
Frequency response (Hz): 25-120
Crossover: 12dB/octave low pass at 50-120Hz;: 24dB/octave high pass at 25Hz
Phase switch: 0°/180°
Input sensitivity:: Low level - 125mV-5V: High level - 250mV-10V
12" CompC 4 Ohm SVC SubwooferSignature Stitches Our signature yellow stitching creates a superior bond between the tough, ribbed polyurethane surround and polypropylene cone for the best in reliability.
Poly Perfection CompC subwoofers have a lightweight, injection-molded polypropylene cone to eliminate flex and distortion. You get a deep, accurate sound no matter how hard you push it.
Stay Cool Perimeter venting slots allow air to constantly circulate around the motor to maintain the perfect operating temperature.
You Make It Bump With recommended power ratings as high as 600 watts, this KICKER sub delivers serious bass! Use a CX amplifier for the perfect marriage of power and performance.
12" CompC 4 Ohm SVC Perimeter venting keeps the air free-flowing around the motor structure. With a KICKER sub that doesn’t overheat, you get high-performance bass that keeps the music pounding.
Features:
Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Perimeter Venting for Thermal Management
Ribbed Polyurethane Surround
Signature Yellow Surround Stitching
High-Strength Spiralead™ Tinsel Leads
Stamped Steel Basket
High Temp Voice Coil
Spring-Loaded Speaker Terminals
*The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.
Specifications
4" Mini Tower Enclosure Pair
Mounting powerful 4-inch KICKER speakers for external listening in marine and powersport applications just got easier with KICKER's durable and weather-proof KM-Series Tower-Speaker Empty Enclosures. (Two enclosures per carton)
Options Includes acoustic poly-fill for clearest sound, all mounting hardware, and fits tubing sizes 7/8", 1", 1-1/8", 1-1/4" round or 1" square.
Bold With its bold cosmetics, the black high gloss KM enclosures with contrasting accent details complement KICKER's 4-inch coaxial marine speakers.
Aim to Please Designed with a 360-degree axis rotation in either direction, allowing the speaker cans to be aimed in the most desirable location to deliver maximum sound quality.
KMMTES Specifications
Speaker Fitting 4" Speakers Materials Tough ABS, weather-proof Aiming Nine-degree axis rotation in either direction for aiming maximum sound quality Fits Mounting Tube Sizes 7/8", 1", 1-1/8", 1-1/4" round or 1" square Connectors Via wiring harness Includes Mounting hardware and polyfill
The L7 stands alone as the most unique subwoofer on the market, with a cone shape that is exclusively designed to produce more output.
The KICKER L7 Subwoofer again reaches new heights in technology and design, capturing the imaginations of 2015 CES® Innovation Award judges and solidifying itself as the crown jewel among industry subwoofers. For more than a decade, KICKER’s square woofer earned numerous awards including several CES accolades, and the 2015 version once again makes distinctive improvements on its way to another honor.
Minimum Sealed Volume ft3 (L): 1 (28.32) Minimum Sealed Power Handling: 900W RMS Maximum Sealed Volume ft3 (L): 2 (56.64) Maximum Sealed Power Handling: 900 Watts RMS
Panel Dimensions for Minimum Sealed Enclosures using 3/4” (1.9cm) thick MDF
Box Volume [ft³, L]: 1 (28.32) Panel A [in, cm]: 13.5X13.5, 34.3X34.3 Panel B [in, cm]: 13.5x12, 34.3x30.5 Panel C [in, cm]: 12x12, 30.5x30.5
Vented Compact
Box Volume, ft³ (L) + port displacement: 1.75 (49.6) Port Opening Size, in x in (cm x cm): 2.5x13.25 (6.4x34) Port Length, in (cm): 22.5 (57) Power Handling, RMS: 900 Watts
Vented SQ
Box Volume, ft³ (L) + port displacement: 3.25 (92) Port Opening Size, in x in (cm x cm): 3x13.25 (7.6x34) Port Length, in (cm): 14.5 (37) Power Handling, RMS: 900 Watts
The CompQ delivers everything on the wish list for high-caliber bass. Huge voice coils provide tremendous power handling and prodigious magnets help to create incredibly high SPL. The CompQ 10-Inch Subwoofer works best with a sealed or ported enclosure with 700 watts of recommended power. See below for more details. Thanks to outstanding power handling next-level structural stability and a unique power plant the CompQ discovers every note with miraculous detail. All with the highest RMS power rating Kicker ever achieved in a round subwoofer. Stabilize KICKERs unique cone bracing technology ensures perfectly linear cone movement while the Blue Lace adds even more stability to the sub. Take the Power A ceramic magnet and computer-optimized voice coil provide outstanding power handling while the UniPlate pole piece backplate ensure the CompQ stays cool even under extreme power loads. Join Forces Spring-loaded copper terminals hold as much as an 8-gauge speaker wire while extra thick tinsel leads bring all that music directly to the voice coil. You get every watt of power right where you want it. The 10" CompQ 4 Ohm The CompQ 10 Subwoofer is the best sound quality round driver Kicker's ever made with nearly identical construction and performance as their L7 square subs. Specifications Thiele/Small Parameters: 42CWQ104 T/S Parameters Product Dimension Sheet: 42CWQ10 Dimensions Rated Impedance [Ω]: 4 Sensitivity [1W, 1m]: 85.7 Frequency Response [Hz]: 24 – 100 Recommended Amplifier Power (watts RMS): 700 Outer Frame Dimension [in, cm]: 10-11/16, 27.2 Mounting Depth [in, cm]: 6-3/8, 16.2 Mounting Cutout [in, cm]: 9-3/16, 23.4 Sealed Enclosure Specs Minimum Sealed Volume ft3 (L): .66 (18.7) Maximum Sealed Volume ft3 (L): 1.25 (35.4) Panel Dimensions for Minimum Sealed Enclosures using 3/4” (1.9cm) thick MDF Box Volume [ft³, L]: .66 (18.7) Panel A [in, cm]: 12x12, 30.5x30.5 Panel B [in, cm]: 12x10.5, 30.5x26.7 Panel C [in, cm]: 10.5x10.5, 26.7x26.7 Vented Minimum Box Volume, ft³ (L) + port displacement: 1.25, 35.4 Port Opening Size, in x in (cm x cm): 2.5x11.25, 6.4x29 Port Length, in (cm): 19.75, 50 Vented Maximum Box Volume, ft³ (L): 2.25, 63.7 Port Opening, in x in (cm x cm): 3x11.25, 7.6x29 Port Length, in (cm): 18, 46
Kicker 43CVT124 12 Inch CompVT Shallow Subwoofer - 4 Ohm
The CompVT 12-Inch Subwoofer is a 4Ω slimline driver. Need serious power without a deep box"
The CompVT is made for you. A stiff ribbed cone is held by a wide Santoprene surround. Perimeter venting keeps the motor cool, and the stamped steel basket is specially shaped to provide plenty of bass, without needing plenty of depth.
The CompVT 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.
Specifications
Thiele/Small Parameters:TS Parameters PDF Size [in, cm]: 12, 30 Impedance [Ohms]: 4 SVC Recommended Amplifier Power (watts RMS): 400 Peak Power (watts, per ANSI/CTA-2031-A): 800 Sensitivity [dB 1w/1m]: 87.1 Mounting Depth [in, cm]: 4-3/8, 11.1 Mounting Diameter [in, cm]: 11, 28.1 Min Sealed Box Vol [cu. ft, L]: 1, 28.3 Max Sealed Box Vol [cu. ft, L]: 4.6, 130 Min Vented Box Vol [cu. ft, L]: 1.75, 49.6 Max Vented Box Vol [cu. ft, L]: 2.25, 63.7
CompR Series 10" Subwoofer Dual 4 Ohm10" CompR 2 Ohm The CompR 10-Inch Subwoofer has a pair of 4Ω voice coils for flexible wiring options.
More Magnet With a double stacked magnet, the CompR provides powerful bass and a thunderous low-end response for the thump you crave when the volume knob needs a workout.
More Features Our signature red double stitching makes an outstanding bond between the improved Santoprene®™ surround and a new all-polypropylene woofer cone. You get a deeper bass that stays pumping, no matter what the volume.
Two Coils, One Solution Every CompR has two sets of brass voice coil terminals, spring-loaded and covered in a lustrous satin nickel finish. A simple push of the terminal gives you the wiring options you need to get the most out of your system.
Bigger magnets, a thicker cone and an improved suspension system help make the CompR a powerful, reliable bass machine.
The CompR 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.
The only thing thin about the CompRT® Subwoofer is the mounting depth. Whether it’s on the road, sand or trail, these tough subs work perfectly in nearly anything with a motor.
12" CompRT 1 Ohm The CompRT 12-Inch Subwoofer is an all-weather slim sub with a 1Ω dual voice coil design.
A thick magnet structure reliably delivers huge power handling without effecting mounting depth. The specially designed UniPlate™ back plate and solid pole piece serve as a single heat-absorbing unit to provide excellent thermal management.
The CompRT 12-Inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power. See below for more details.
Specifications
Size [in, cm]: 12, 30
Impedance [Ohms]: 1 DVC
Power Watts [peak/RMS]: 1000/500
Sensitivity [dB 1w/1m]: 85.5
Mounting Depth [in, cm]: 3-3/4,9.6
Mounting Diameter [in, cm]: 11, 27.9
Min Sealed Box Vol [cu. ft, L]: 0.55, 15.57
Max Sealed Box Vol [cu. ft, L]: 2.0, 56.64
Min Vented Box Vol [cu. ft, L]: 1.75, 49.6
Max Vented Box Vol [cu. ft, L]: 2.25, 63.7
To use as a single subwoofer it is recommended to use a mono amplifier rated between 500 and 1000 watts RMS that is safe to run at either 1/2 or 2 Ohm depending on your setup.
White LED Marine Grill for KM10 Subwoofer
White LED grille with multi-color LED accent lighting that can be changed to fit your mood or craft.
Light Show Add LED grilles (sold separately) with seven selectable LED colors! Add the KMLC LED controller for 20 total colors and 19 different lighting modes to make it even more fun! Non-LED grilles also available.
Optional LED Remote Customize your LED lighting to get the perfect look for your boat.
The KMLC remote provides multi-function control of LED lighting by managing 20 different colors and 19 dynamic modes, including adjustable brightness, fade, speed/strobe and auto save.
The CompVX™ stands alone among round subwoofers, using all of the exclusive Solo-Baric® L7 design and performance features except the square shape.
The cast aluminum basket comes with a motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire, so when you run tons of power to this sub, it gives you loud, distortion-free bass all day long.
Features
Dual Two-Ohm Voice Coils
Thick Polypropylene Cone
Signature Double Blue Surround Stitching
Ribbed Santoprene® Surround
SoloKon™ Cone Reinforcement
Oversized Suspension System
High-Strength Insulated Tinsel Leads
High Temp Voice Coil
Perimeter Venting for Thermal Management
Massive Ceramic Magnet
UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation
Cast Aluminum Basket
Satin Nickel Spring-Loaded Speaker Terminals
Want setup help" Go to KICKERU for a free woofer & amplifier configuration app!
*The CompVX 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power. See below for more details.
One 12-inch subwoofer, one owner's manual, two stickers
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Creating Great Sound
When you're looking for experience in building great-sounding car speakers it's tough to beat Kicker. Their CompVX subwoofer lineup applies the lessons learned from the original Kicker Comp line that goes back to 1986 giving you the benefit of Kicker's years of expertise in creating great-sounding bass.
Kicker Technology at Work
Kicker's 44CVX122 12" subwoofer features a flex-resistant polypropylene cone with Kicker's SoloKon™ reinforcement for hard-hitting lows without distortion while the ribbed Santoprene rubber surround promotes long excursion and helps to keep the cone on target. The sub's cast aluminum basket provides a reliable foundation for big bass and its extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
Versatile Installation This sub handles up to 750 watts RMS to bring out the punch your music's been missing and its dual 4-ohm voice coils make it easy to get more power from your mono amplifier. This versatile sub works well in sealed or ported enclosures.
Features
12" subwoofer with dual 4-ohm voice coils
injection-molded polypropylene cone
ribbed Santoprene rubber surround
cast-aluminum basket
power handling: 750 watts RMS (375 watts per coil)
peak power handling: 1500 watts
frequency response: 20-500 Hz
sensitivity: 87.1 dB
top-mount depth: 6-11/16"
sealed box volume: 1.0 - 4.6 cu. ft.
ported box volume: 1.75 - 2.25 cu. ft.
Specifications
Thiele/Small Parameters: 44CVX124 T/S Parameters
Size (IN.,CM): 12, 30
Impedance (OHMS): 4 DVC
Recommended Amplifier Power (watts RMS): 750
Peak Power (watts, per ANSI/CTA-2031-A): 1500
Sensitivity (dB 1w/1m): 87.1
Frequency Response (Hz): 20-500
Mounting Depth (in, cm): 6-11/16, 16.9
Mounting Cutout (in, cm): 11-1/16, 28
Min Sealed Box Vol (cu. ft, L): 1.0, 28.3
Max Sealed Box Vol (cu. ft, L): 4.6, 130
Min Vented Box Vol (cu. ft, L): 1.75, 49.6
Max Vented Box Vol (cu. ft, L): 2.25, 63.7
What's in the box?
one 12-inch subwoofer, one owner's manual, two stickers
Huge value. High performance. The KICKER CompC Subwoofer pumps out the bass with all the intensity your ears can handle.
Perimeter venting keeps the air free-flowing around the motor structure. With a KICKER sub that doesn’t overheat, you get high-performance bass that keeps the music pounding.
Features:
Dual Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Perimeter Venting for Thermal Management
Ribbed Polyurethane Surround
Signature Yellow Surround Stitching
High-Strength Spiralead™ Tinsel Leads
Stamped Steel Basket
High Temp Voice Coil
Spring-Loaded Speaker Terminals
*The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.Specifications
8" CompC 4 Ohm DVCThe dual-voice-coil CompC Subwoofers make wiring easy with a pair of spring-loaded terminals, for easy optimizing of a CX-Series Amplifier. Big power and big bass are easy to get.Features:
Dual Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Perimeter Venting for Thermal Management
Ribbed Polyurethane Surround
Signature Yellow Surround Stitching
High-Strength Spiralead™ Tinsel Leads
Stamped Steel Basket
High Temp Voice Coil
Spring-Loaded Speaker Terminals
Want setup help? Go to KICKERU for a free woofer & amplifier configuration app!*The CompC 8-Inch Subwoofer works best with a sealed or ported enclosure and 200 watts of recommended power. See infographic in image gallery for more details.
FeaturesSignature Stitches Our signature yellow stitching creates a superior bond between the tough, ribbed polyurethane surround and polypropylene cone for the best in reliability.
Poly Perfection CompC subwoofers have a lightweight, injection-molded polypropylene cone to eliminate flex and distortion. You get a deep, accurate sound no matter how hard you push it.
Stay Cool Perimeter venting slots allow air to constantly circulate around the motor to maintain the perfect operating temperature.
You Make It Bump With recommended power ratings as high as 600 watts, this KICKER sub delivers serious bass! Use a CX amplifier for the perfect marriage of power and performance.
10" CompC 4 Ohm SVC CompC Subwoofers are equipped with stamped steel frame construction, inheriting elite innovations for world-class KICKER power, durability and hard-hitting, high-performance bass.
Features:
Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Perimeter Venting for Thermal Management
Ribbed Polyurethane Surround
Signature Yellow Surround Stitching
High-Strength Spiralead™ Tinsel Leads
Stamped Steel Basket
High Temp Voice Coil
Spring-Loaded Speaker Terminals
*The CompC 10-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.
Kicker 44KMTC94 9" Enclosed LED Marine Tower Speakers - Black
KICKER KMTC9 HLCD tower systems are made for incredibly smooth sound up close or at a distance - without harsh horn “glare.” Play your tunes as loud as you want, these powerful horn-loaded speakers are the new standard for marine sound quality. Sold as pairs.FORM AND FUNCTIONKMTC Tower Systems deliver great looks, total adjustability and incredible sound quality. Your tunes are loud and clear, whether you’re in the boat, at Party Cove or the end of a tow rope. Want to aim your sound? Easily rotate the speakers a full 354˚ without tools, then watch the LED’s light up the night in any one of seven colors. Don’t just be the life of the party. Be the reason for it.HIGHLIGHTS
Four-Ohm Voice Coil
High-Frequency Horn Design with Titanium-Dome Compression Drivers
Stitched Polypropylene Cone With Santoprene® Surround
UV-Resistant Polymer Basket
Near full rotation swivel With Toolless Locking Cam/Toggle System
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC.**ASTM G154 400 hr. Accelerated UV Test***ASTM B117 200 hr. Salt Fog TestThe KMTC 9-Inch Tower System works best with 300 watts of recommended power per speaker.
KICKER KMTC9 HLCD tower systems are made for incredibly smooth sound up close or at a distance - without harsh horn “glare.” Play your tunes as loud as you want, these powerful horn-loaded speakers are the new standard for marine sound quality. Sold as pairs.FORM AND FUNCTIONKMTC Tower Systems deliver great looks, total adjustability and incredible sound quality. Your tunes are loud and clear, whether you’re in the boat, at Party Cove or the end of a tow rope. Want to aim your sound? Easily rotate the speakers a full 354˚ without tools, then watch the LED’s light up the night in any one of seven colors. Don’t just be the life of the party. Be the reason for it.HIGHLIGHTS
Four-Ohm Voice Coil
High-Frequency Horn Design with Titanium-Dome Compression Drivers
Stitched Polypropylene Cone With Santoprene® Surround
UV-Resistant Polymer Basket
Near full rotation swivel With Toolless Locking Cam/Toggle System
Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC.**ASTM G154 400 hr. Accelerated UV Test***ASTM B117 200 hr. Salt Fog TestThe KMTC 9-Inch Tower System works best with 300 watts of recommended power per speaker.
12" Solo-Baric L7S 4 Ohm SubwooferThe KICKER® Solo-Baric® L7S™ handles tons of power and heat without distortion or compromising on sound quality.Square MattersThe Solo-Baric revolves around KICKER's most advanced cone design, the injection-molded SoloKon™. The 360-degree, constant-contact back bracing adheres directly to every contour of the square cone, adding targeted strength, reliable performance and accurate response for the super-clean bass you’ve been looking for.Features:
Dual Four-Ohm Voice Coils
Injection-Molded Polypropylene Cone
Patented Corner Ribs Minimize Distortion
SoloKon™ 360-Degree Back Bracing
Ribbed Santoprene Surround With Blue Surround Stitching
UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
Want setup help? Go to KICKERU for a free woofer & amplifier configuration app!*The Solo-Baric L7S 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power. See infographic for more details.
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull, or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Superior Sound
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. These speakers can endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Four-Ohm Voice Coil
1/2-Inch PEI Tweeter
Locking/Sealed Terminal Covers
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
316L Stainless Mounting Hardware Included
Charcoal and White Grilles Included
Meets or Exceeds ASTM Standards for UV* and Salt/Fog Exposure**
*ASTM G154 400 hr. Accelerated UV Test
**ASTM B117 200 hr. Salt Fog Test
This KM Four-Inch Coaxial Speaker works best with 50 watts of recommended power.
Specifications
Woofer(in,mm): 4, 100
Tweeter(in,mm): 1/2, 13
Tweeter Dome Material: PEI
Rated Impedance(Ohms): 4
Peak Power (watts, per ANSI/CTA-2031-A): 150
Recommended Amplifier Power (watts RMS): 50
Sensitivity(1W,1m): 89
Frequency Response(Hz): 60-20k
Mounting Hole Diameter(in,mm): 3-3/4, 94
Mounting Template*
Mounting Depth(in,mm): 1-13/16, 46
LED Lighting: No
Grilles: Charcoal and White
What's in the Box
2 - 4" 4 Ohm Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 - Zip Ties
*For template to be accurate, ensure the print properties are set at 100% not scale to page.
Sturdy speakers that sound great Kicker's 45KM654 6-1/2" marine speakers sound terrific and look great on any boat. Designed for life on the water these speakers feature sealed motors rubber cone surrounds and locking terminal covers to keep spray away from the internal componentry. Whether you're on fresh water or salt these speakers will give you years of outstanding performance.
Rugged and versatile These 6-1/2" speakers are tough enough for marine duty but they're very easy on your ears. The durable poly woofers and 3/4" titanium tweeters cut through wind waves and engine roar to deliver great sound without annoying harshness. Whether you're mounting them in a bulkhead or installing them in a set of Kicker's custom enclosures these speakers will make your day on the water just a little bit better than it was already.
Two sets of grilles The package includes white and charcoal grilles so you can make these speakers blend in with just about any color scheme. Whichever color you choose special UV treatments on the cones surrounds baskets and grilles ensure that they'll stand up to harsh sunlight.
Product Highlights 2-way 6-1/2" marine speakers (pair) UV-treated polypropylene woofer with Santoprene rubber surround sealed motor structure and locking terminal covers 3/4" balanced dome titanium tweeter UV-resistant polymer basket stainless steel mounting hardware included
Specifications Power range: 2-65 watts RMS (195 watts peak power) Frequency response: 35-21000 Hz Sensitivity: 90 dB Impedance: 4 ohms Cutout diameter: 5.06" Frame diameter: 6.55" Mounting depth: 2-7/8" Warranty: 1 year
BIG BASS SOLO-BARIC 10" SQUARE SOLUTION
Our square subs deliver more cone area. That means we deliver more bass, yet require no more air space than a standard round sub.
Features
Dual two-Ohm Voice Coil
Wrap Around Gasketing
Patented Ribbed Corners
Injection-Molded SoloKon™ Woofer
360-Degree Back Bracing
UniPlate™ Back Plate And Pole Piece
Bumped Back Plate
Thick Tinsel Leads
Large Ceramic Magnet
Steel Basket With Spoke Design
Nickel Plated Speaker Terminals
The L7R 10-Inch Subwoofer works best with 500 watts of recommended power in a sealed or ported enclosure. See infographic in image gallery for more details.
Specifications
Thiele/Small Parameters: 45L7R102 T/S Parameters Product Dimension Sheet: 45L7R10 Dimensions SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 2 DVC Recommended Amplifier Power (watts RMS): 500 Peak Power (watts, per ANSI/CTA-2031-A): 1000 SENSITIVITY [dB 1w/1m]: 85.9 MOUNTING DEPTH [in, cm]: 6-1/8, 15.7 MOUNTING DIAMETER [in, cm]: 9-5/16, 23.7 MIN SEALED BOX VOL [cu. ft, L]: .66, 18.7 MAX SEALED BOX VOL [cu. ft, L]: 1, 28.3 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 What's in the Box: 1 - 10" Subwoofer, 1 - install manual, 2 - Kicker stickers
BIG BASS SOLO-BARIC 10" SQUARE SOLUTION
Our square subs deliver more cone area. That means we deliver more bass, yet require no more air space than a standard round sub.
Features
Dual two-Ohm Voice Coil
Wrap Around Gasketing
Patented Ribbed Corners
Injection-Molded SoloKon™ Woofer
360-Degree Back Bracing
UniPlate™ Back Plate And Pole Piece
Bumped Back Plate
Thick Tinsel Leads
Large Ceramic Magnet
Steel Basket With Spoke Design
Nickel Plated Speaker Terminals
The L7R 10-Inch Subwoofer works best with 500 watts of recommended power in a sealed or ported enclosure. See infographic in image gallery for more details.
Specifications
Thiele/Small Parameters: 45L7R102 T/S Parameters Product Dimension Sheet: 45L7R10 Dimensions SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 2 DVC Recommended Amplifier Power (watts RMS): 500 Peak Power (watts, per ANSI/CTA-2031-A): 1000 SENSITIVITY [dB 1w/1m]: 85.9 MOUNTING DEPTH [in, cm]: 6-1/8, 15.7 MOUNTING DIAMETER [in, cm]: 9-5/16, 23.7 MIN SEALED BOX VOL [cu. ft, L]: .66, 18.7 MAX SEALED BOX VOL [cu. ft, L]: 1, 28.3 MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4 MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7 What's in the Box: 1 - 10" Subwoofer, 1 - install manual, 2 - Kicker stickers
The 10-inch L7R Square Sub moves more air and delivers bigger bass, so you get more bump out of every watt!
THE ORIGINAL SQUARE SUB
The engineers at KICKER invented the original square sub right here in the heart of America. Designed to give you more bass - yet take up no more air space - than a standard round sub. Welcome to the miraculous world of the L7R!
Dual four-Ohm Voice Coil
Wrap Around Gasketing
Patented Ribbed Corners
Injection-Molded SoloKon™ Woofer
360-Degree Back Bracing
UniPlate™ Back Plate And Pole Piece
Bumped Back Plate
Thick Tinsel Leads
Large Ceramic Magnet
Steel Basket With Spoke Design
Nickel Plated Speaker Terminals
The L7R 10-Inch Subwoofer works best with 500 watts of recommended power in a sealed or ported enclosure. See infographic in image gallery for more details.
12" L7R 2 O SubwooferThe 12-inch L7R Square Subwoofer moves more air and delivers bigger bass, so you get more bump out of every watt!BIG BASS. SAME SPACE.The engineers at KICKER HQ designed the L7R to give you more bass than a circular sub, without a larger enclosure. Welcome to the world of square sub perfection!
Dual two-Ohm Voice Coil
Wrap Around Gasketing
Patented Ribbed Corners
Injection-Molded SoloKon™ Woofer
360-Degree Back Bracing
UniPlate™ Back Plate And Pole Piece
Bumped Back Plate
Thick Tinsel Leads
Large Ceramic Magnet
Steel Basket With Spoke Design
Nickel Plated Speaker Terminals
The L7R 12-Inch Subwoofer works best with 600 watts of recommended power in a sealed or ported enclosure.
The engineers at KICKER invented the original square sub right here in Stillwater, Oklahoma. Designed to give you more bass, yet take up no more air space than a standard round sub. Welcome to the incredible world of the L7R!
Dual Four-Ohm Voice Coil
Wrap Around Gasketing
Patented Ribbed Corners
Injection-Molded SoloKon™ Woofer
360-Degree Back Bracing
UniPlate™ Back Plate And Pole Piece
Bumped Back Plate
Thick Tinsel Leads
Large Ceramic Magnet
Steel Basket With Spoke Design
Nickel Plated Speaker Terminals
The L7R 12-Inch Subwoofer delivers optimal performance with 600 watts of recommended power, whether installed in a sealed or ported enclosure.
SPECIFICATIONSSIZE [in, cm]: 15, 38IMPEDANCE [Ohms]: 2 DVCRecommended Amplifier Power (watts RMS): 900Peak Power (watts, per ANSI/CTA-2031-A): 1800SENSITIVITY [dB 1w/1m]: 88.05MOUNTING DEPTH [in, cm]: 8 -3/8, 21.5MOUNTING DIAMETER [in, cm]: 13-3/4, 34.9MIN SEALED BOX VOL [cu. ft, L]: 1.5, 42.48MAX SEALED BOX VOL [cu. ft, L]: 3, 85MIN VENTED BOX VOL [cu. ft, L]: 3, 85MAX VENTED BOX VOL [cu. ft, L]: 6, 170What's in the Box: 1 - 15" Subwoofer, 1 - install manual, 2 - Kicker stickersWarranty: When purchased from Car Toys online or at a retail store, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase.
Kicker 46CK8 amp kits feature top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
This Complete Eight Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up an amp is easy when get everything you need in one place. The best hardware, signal and power cable comes in one convenient package.
All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included in the kit:
17 ft 8 awg blue power wire
4 ft 8 awg gray ground wire
Self tapping bolt and washer
FHS fuse holder with 60 amp fuse L=3.06", W=1.33", H=1.32"
17 ft 16 gauge remote wire
16.4 ft KI RCAs
12 ft Q series 12 awg speaker wire
6x 6" zip ties
8 awg firewall grommet
1x 18-22 awg butt connector
4x 12 awg fork terminals
2x blue fork terminal boots
2x black fork terminal boots