Kenwood eXcelon X501-1 Class D Mono Power Amplifier

Kenwood eXcelon X501-1 Class D Mono Power Amplifier

Jensen Power250x2 2 Channel Bridgeable Full Range Amplifier

Jensen Power250x2 2 Channel Bridgeable Full Range Amplifier

Main

Kicker 43CXA6001 Mono Amplifier

Kenwood eXcelon X501-1 Class D Mono Power Amplifier

$199.99
In stock
SKU
X5011
  • 2 Ohms Load Capability
  • Speaker Level Input with Signal Sensing Turn-on
  • Power MOS-FET Switching Power Supply
  • Extruded Aluminum Heat Sink Design

Kenwood eXcelon X501-1

Class D Mono Power Amplifier

X Series Amplifiers
X Series Amplifiers provide a powerful solution in a compact design ideal for upgrading your car audio system. The reliability of the thermal management system instantaneously controls amplitude and ensures uninterrupted sound reproduction when high output drives up temperatures. Experience the luxury of choice afforded by Kenwood's compact engineering.

Dual Sigma Drive
This advanced negative feed back circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won't stop moving once it's in motion. This extra movement (sound) creates a type of distortion that's not part of the original signal. The negative feedback circuit senses this unwanted movement and sends out an opposite pulse to stop the speaker like an electronic brake.

Dual Sigma Drive

Small Size Big Power
The X501-1 is small in size but with its tremendous sound output, it is extremely versatile. It can be installed in vehicles where space is limited and is perfect for vehicle owners who don't want to sacrifice cargo room or who prefer hidden installations.

Dimensions

General Features

  • MAX Power 1000W
  • RMS Power 300W (4Ω) 
  • RMS Power 500W (2Ω) 
  • Speaker Level Input
  • Signal Sensing Turn-On
  • Variable Low Pass Filter
  • Bass Boost
  • (W)6-11/16” x (H)2-3/16” x (D)7-3/8”

CEA-2006 Primary Ratings

  • Power Output 300 Watts RMS x 1 at 4 Ohms and ≤1%THD+N
  • Signal-to-Noise Ratio 85dBA (Reference: 1Watt into 4Ohms)

Maximum Power Output

  • Max Power 1000W
  • Rated Power Output at 14.4V 
  • SUB (4 Ohms) 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤0.5% THD)
  • SUB (2 Ohms) 500Watts RMS x 1 (2 Ohms, 100Hz, ≤0.5% THD)

Specifications

  • Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V)
  • Frequency Response 20Hz-200Hz (+0dB, -3dB)
  • Input Impedance 10k ohm
  • Speaker Impedance 4Ω (2Ω to 8Ω allowable)

Audio Section 

  • Low-Pass Filter 50Hz-200Hz, -24dB/oct
  • High-Pass Filter -
  • Bass Boost 40Hz, 0dB - +18dB
  • RCA Input Sensitivity 0.2[V] - 5.0 [V]
  • Speaker Level Input Sensitivity 4.0[V] - 12.0 [V]

Terminals

  • Battery & Ground M6 Screw Type Terminal Block
  • Speaker Output M4 Screw Type Terminal Block

General

  • Dimensions(WxHxD) 6-11/16 x 2-3/16 x 7-3/8 [inch]
  • Operating Voltage 14.4V(11-16V allowable)
  • Current Consumption 34 [A]

Key Features

  • CEA-2006 Compliant
  • 2 Ohms Load Capability
  • Speaker Level Input with Signal Sensing Turn-on
  • Power MOS-FET Switching Power Supply
  • Extruded Aluminum Heat Sink Design
More Information
SKU X5011
Manufacturer Kenwood
Manufacturer's Warranty 2 Year Limited Manufacture's Warranty
Manufacture's Warranty 2 1 Year Manufacture's Warranty
UPC 019048215000
Manufacturer Sku X501-1