Wet Sounds REVO-12FA 12 Inch Free Air Marine Subwoofer

Wet Sounds REVO-12FA

12 Inch 4 Ohm Free Air Marine Subwoofer Black

Free Air REVO subs are recommended primarily for Infinite Baffle (Free Air) applications where a dedicated subwoofer enclosure is not available or practical.

Features

All REVO 10” & 12” Subwoofers share the same design features:

• Powder Coated Cast Aluminum (REVO10/12) or Nylas Composite (REVO8) Frame - to withstand extreme environmental use. Designed to accept optional RGB wiring.
• Injection Molded Composite Cone – For durability & low distortion.
• Santoprene Rubber Spider – Much more durable to water & temperature changes than a traditional treated Cotton Spider used by the majority of marine speakers & subwoofers.
• Santoprene Rubber Surround – Offers a superior bond to the composite cone. Also resists deterioration due to water, temperature & ultraviolet exposure.
• Gold Plated Terminals – Designed to resist corrosion.

All REVO Subwoofers are sold without grills. 8 different grill designs are available separately for all versions of 10” & 12” REVO HP & FA subwoofers. This will enable users to have matching grills on both REVO Coaxial In-Boat speakers & REVO Subwoofers.

Optional RGB LED Kits are available to fit under all REVO 10” & 12” subwoofer grills to enable users to have thousands of LED light display combinations.

Technologies

• Free Air
• Thermoformed Santoprene Rubber Surround
• Powder Coated Aluminum Frame
• Injection Molded Composite Cone

Specifications

• Impedance: 4 ohms 
• RMS Watts: 500
• PEAK Watts: 1000
• Frequency Response: 20Hz to 400HZ
• Sensitivity: 88 db at 1watt/1 meter
• Weight: 17.6 lbs (7.98kg)
• Diameter: 12.6 inches (320.04mm) 
• Mounting Depth: 4.92 inches (124.96mm) 
• Hole Cut Out: 11.26 inches (286.00mm) 
• Vented Enclosure: 1.7 cu ft (Optimum: Tuned at 41 Hz) 
• Box Specs Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure 

Note: All specifications are for each REVO-12FA