{"product_id":"ds18-pro-zt6","title":"DS18 PRO-ZT6 PRO-ZT 6.5\" Coaxial Mid-Range Loudspeaker with Water-Resistant Cone Built-in Bullet Tweeter and Grill - 225W RMS 4-Ohm","description":"\u003ch2\u003eDS18 PRO-ZT6 PRO-ZT 6.5\" Coaxial Mid-Range Loudspeaker with Water-Resistant Cone Built-in Bullet Tweeter and Grill | 225W RMS 4-Ohm\u003c\/h2\u003e\n\u003cp\u003eExperience earth-shaking sound with the PRO-ZT6: a 2-way mid-range built for raw power, and full-range functionality. Packed into a rugged, water-resistant coaxial build.\u003c\/p\u003e\n\u003cp\u003eInsane PowerHandling an RMS power of 225W and a MAX power of 450W, the PRO-ZT6 delivers breathtaking volume and precision. With a 4-Ohm impedance for easy installation and an ultra-high sensitivity rating of 96dB, you’re guaranteed powerful sound output even at lower volumes.\u003c\/p\u003e\n\u003cp\u003eWide Frequency RangeWith an impressive frequency response range of 65Hz - 22KHz, the PRO-ZT6 captures every nuance across the entire audio spectrum. The integrated neodymium tweeter refines the balance between highs and lows, ensuring you hear every detail of your music.\u003c\/p\u003e\n\u003cp\u003eDeep, Impactful BassEngineered with a robust ferrite magnet, the 6.5\" mid-range woofer generates a deep low-end punch, for immersive bass response. This powerful magnet structure enhances voice coil action for dynamic impact every session.\u003c\/p\u003e\n\u003cp\u003eProtective Grill IncludedThe rugged steel mesh grille now comes with an integrated cloth shade. This added layer helps block dust, water spray, and direct sunlight from reaching the cone, protecting internal components and maintaining performance in any conditions.\u003c\/p\u003e\n\u003cp\u003eTransform your system with the PRO-ZT6 and experience music the way it was meant to be heard!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e 225 watts RMS \/ 450 Watts max gives you plenty of headroom for loud, clean playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Sensitivity:\u003c\/strong\u003e 97dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 85Hz-20kHz for full, balanced sound across its intended range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Magnet:\u003c\/strong\u003e A strong motor structure keeps the cone under control for tight, accurate output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Coil:\u003c\/strong\u003e 1.5” (38.1 mm) CCAW voice coil on a Kapton former handles heat and power for long listening sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone Material:\u003c\/strong\u003e Water-Resistant Paper cone is stiff and lightweight for accurate, low-distortion sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurround:\u003c\/strong\u003e Treated Cloth surround allows controlled cone movement and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter \/ Driver:\u003c\/strong\u003e Aluminum Alloy diaphragm delivers crisp, detailed highs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Excursion:\u003c\/strong\u003e Xmax of 1.65mm lets the cone move more air for deeper bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Basket:\u003c\/strong\u003e Steel basket keeps the moving parts aligned under high power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Depth:\u003c\/strong\u003e 77 mm (3.03”) mounting depth; check your vehicle or enclosure for fit, or let a Car Toys installer confirm it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended High-Pass:\u003c\/strong\u003e Use a 100 Hz high-pass filter to protect the speaker and get the cleanest output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistant:\u003c\/strong\u003e 6.5\" Coaxial Water Resistant Mid-Range construction holds up to moisture, making it a good fit for boats, UTVs and motorcycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003cbr\u003e\n6.5\" Coaxial Water Resistant Mid-Range\u003cbr\u003e\nRMS Power: 225 Watts (450 Watts Peak)\u003cbr\u003e\nImpedance: 4-Ohm\u003cbr\u003e\nFerrite \u0026amp; Neodymium Magnets\u003cbr\u003e\nGrill with Cloth Shade\u003cbr\u003e\n97dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral\u003c\/strong\u003e\u003cbr\u003e\nNominal Diameter: 6.5\" (165.1 mm)\u003cbr\u003e\nNominal Impedance: 4 ohms\u003cbr\u003e\nRMS Power Handing: 225 Watts\u003cbr\u003e\nMaximum Power Handing: 450 Watts\u003cbr\u003e\nSensitivity (1w\/1m): 97dB\u003cbr\u003e\nFrequency Response: 85Hz-20kHz\u003cbr\u003e\nRecommended Hi Pass Crossover: 100 Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e\u003cbr\u003e\nVoice Coil Diameter: 1.5” (38.1 mm)\u003cbr\u003e\nVoice Coil Former Material: Kapton\u003cbr\u003e\nWinding Material: CCAW\u003cbr\u003e\nBasket Material: Steel\u003cbr\u003e\nMagnet Weight: 27 oz\u003cbr\u003e\nMagnet Material: Ferrite\u003cbr\u003e\nCone Material: Water-Resistant Paper\u003cbr\u003e\nSurround Material: Treated Cloth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTweeter\u003c\/strong\u003e\u003cbr\u003e\nVoice Coil Diameter: 1”\u003cbr\u003e\nVoice Coil Material: KAPTON\u003cbr\u003e\nWinding Material: CCAW\u003cbr\u003e\nDiaphragm Material: Aluminum Alloy\u003cbr\u003e\nMagnet Material: Neodymium (N35H)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMeasurements\u003c\/strong\u003e\u003cbr\u003e\nOverall Diameter: 178 mm (7”)\u003cbr\u003e\nFront Mount Baffle Cutout: 144 mm (5.67”)\u003cbr\u003e\nMounting Depth: 77 mm (3.03”)\u003cbr\u003e\nOverall Depth: 97mm (3.81”)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThiele \u0026amp; Small Parameters\u003c\/strong\u003e\u003cbr\u003e\nVas: 4.72L \/ 0.16ft3\u003cbr\u003e\nXmax: 1.65mm\u003cbr\u003e\nFs: 120Hz\u003cbr\u003e\nQms: 5.259\u003cbr\u003e\nQes: 0.614\u003cbr\u003e\nQts: 0.55\u003cbr\u003e\nRe: 3.2 Ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional Installation\u003c\/strong\u003e\u003cbr\u003e\nWant it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.\u003c\/p\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":68119688184129,"sku":"PRO-ZT6","price":95.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5692\/9601\/files\/ds18-pro-zt6-pro-zt-65-coaxial-mid-range-loudspeaker-with-water-resistant-cone-built-in-bullet-tweeter-and-grill-225w-rms-4-ohm-4139646.jpg?v=1793634316","url":"https:\/\/www.cartoys.com\/products\/ds18-pro-zt6","provider":"Car Toys","version":"1.0","type":"link"}