{"product_id":"audison-th-3-0-ii-voce","title":"Audison TH 3.0 II VOCE Thesis Series 3\" Mid Range Speakers","description":"\u003ch2\u003eAudison TH 3.0 II VOCE Thesis Series 3\" Mid Range Speakers\u003c\/h2\u003e\n\u003cp\u003eThe human auditory system processes the range of medium frequencies with maximum sensitivity and selectivity because it makes the voice intelligible from the rest of the audio spectrum.The R \u0026amp;D team started from this simple principle to design from scratch the TH 3.0 II VOCE, dedicated to this fundamental range of frequencies, with the simple as well as ambitious target of extreme linearity, in order not to add or hide anything of the signal reproduced, enhancing in this way every nuance.ULTRA HIGH CONTROLThe extremely powerful custom N38 H-grade Neodymium magnet ensures unmatched control of the mobile group and the aluminium ring nullifies the intermodulation distortion otherwise generated at peak excursions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtreme Linearity\u003c\/strong\u003e Through finite element simulation (FEM) the Audison R \u0026amp;D team has optimized the break-up point between cone\/surround, obtaining an ultra-linear frequency response in the mid-range.The generous 30 mm CCAR (Copper Clad Aluminum Ribbon) voice coil wound with flat wire gives the TH 3.0 II Voce an extraordinary excursion and minimizes at the same time the cone non-linearity.TPX® CONETH 3 II Voce membrane is made of TPX®, a transparent material that ensures frequency response linearity leaving the speaker interior in full view.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30,5 mm mobile voice coil in CCAR (Copper Clad Aluminum Ribbon) wound with flat wire to maximize the force factor and heat dissipation.\u003c\/li\u003e\n\u003cli\u003eAluminium demodulation ring which linearizes the high excursion intermodulation distortion, canceling any sound colorations.\u003c\/li\u003e\n\u003cli\u003eN38 “H-grade neodymium magnet included in the voice coil to obtain superior control of the mobile crew and superior thermal stability.\u003c\/li\u003e\n\u003cli\u003eMotor geometry designed using finite element simulation software to optimize efficiency by concentrating the magnetic field in the gap.\u003c\/li\u003e\n\u003cli\u003eMembrane made of TPX®, a transparent material that reduces frequency response irregularities and provides a view of the inside of the speaker.\u003c\/li\u003e\n\u003cli\u003eMembrane geometry designed by simulation software to obtain homogeneous directivity.\u003c\/li\u003e\n\u003cli\u003eOptimized cone\/surround break-up with extensive simulations to linearize the response at medium frequencies.\u003c\/li\u003e\n\u003cli\u003eBasket made of a single piece of die-cast aluminium with four pairs of spokes for maximum rigidity without slowing down the air flow.\u003c\/li\u003e\n\u003cli\u003eSuspension and spider with very high excursion, optimized with simulations of the multi-physical behavior of the speaker.\u003c\/li\u003e\n\u003cli\u003eeID technology for the traceability of TH 3.0 II Item from production to purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eNominal diameter: 70 mm (3 in)\u003cbr\u003eImpedance: 4 Ohm\u003cbr\u003ePower Handling - Peak: 110 W\u003cbr\u003ePower Handling - Continuous: 55 W\u003cbr\u003eSensitivity: 85.6 dB\u003cbr\u003eFrequency Response: 110 ÷ 5700 Hz\u003cbr\u003eVoice Coil Ø: 30.5 mm\u003cbr\u003eMagnet Material: SPECIAL NEODYMIUM N38H\u003cbr\u003eMagnet size D x d x h: 29 x 6 x 8 mm\u003cbr\u003eVoice Coil Material: CCAP - COPPER CLAD ALLUMINIUM RIBBON\u003cbr\u003eXmax: 3.3 mm (0.13 in)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectric-acoustic Specs\u003c\/strong\u003e\u003cbr\u003eRe: 3.4 Ohm\u003cbr\u003eFs: 100 Hz\u003cbr\u003eLe: 0.18 mH\u003cbr\u003eVas: 1.01 l (0.036 ft)\u003cbr\u003eMms: 4.3 g (0.152 oz)\u003cbr\u003eCms: 0.59 mm\/N\u003cbr\u003eBL: 4.2 T•m\u003cbr\u003eQts: 0.48\u003cbr\u003eQes: 0,52\u003cbr\u003eQms: 5.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u0026amp; Dimensions\u003c\/strong\u003e\u003cbr\u003eWeight: 0.25 kg\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0724\/5692\/9601\/files\/Audison_TH3_Dim_600x600.webp?v=1776701035\" alt=\"Dimensions\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eDimension A: 84 mm (3.31 in)\u003cbr\u003eDimension B: 73.5 mm (2.89 in)\u003cbr\u003eDimension C: 45 mm (1.77 in)\u003cbr\u003eDimension D: 37 mm (1.46 in)\u003cbr\u003eDimension E: 89 mm (3.5 in)\u003cbr\u003eDimension F: 18 (0.7 in)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0724\/5692\/9601\/files\/Audison-Thesis-VOCE_600x600.webp?v=1776701067\" alt=\"Frequency Response Chart\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":51656383004993,"sku":"TH30IIVOCE","price":1999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5692\/9601\/files\/audison-th-30-ii-voce-thesis-series-3-mid-range-speakers-7319087.jpg?v=1776743673","url":"https:\/\/www.cartoys.com\/products\/audison-th-3-0-ii-voce","provider":"Car Toys","version":"1.0","type":"link"}