PPKICK1HO Package

Car Toys Kicker 10" Bass Pack Package PPKICK1HO

PPKEN2HO Package

Car Toys Kenwood 12" Bass Pack Package PPKEN2HO

PPKICK2HO Package

Car Toys Kicker 12" Bass Pack Package PPKICK2HO

Car Toys Kicker 10" Bass Pack Package PPKICK1HO

was $629.96 Special Price $469.96
In stock
SKU
PPKICK1HO
  • Kicker 43CXA600.1 600 watt Mono Amplifier
  • Kicker 44CWCS104 10" CompC Subwoofer (2)
  • Bassworx RP210RG Dual 10" Ported Subwoofer Enclosure

Car Toys Kicker 10" Bass Pack Package PPKICK1HO

Kicker 43CXA6001

Mono Amplifier

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.

CX600.1 Mono Amplifier

The CX 600.1 Mono Amplifier is built for big bass in a sleek, yet affordable package.

Using a Class D power plant and FIT™ (Failsafe Integration Technology) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system.

This CX amplifier delivers as much as 600 watts into one channel. 

Specifications

CX-SERIES MONOBLOCK AMPLIFIERS CXA600.1

Power (watts/ch), 2 Ohm mono     600

Dimensions     (in.) 2-3/8H x 7-3/16W x 8-1/8, (cm) 6.0H x 18.0W x 21

Frequency Response (Hz):     25-200, +0/-1dB

Input Sensitivity:     high level 250mV-10V, low level 125mV-5V

Signal-to-Noise Ratio:      >95dB, a-weighted, re: rated power

Active Crossover:      12dB/octave, variable 50-200Hz, low pass only

Subsonic Filter      24dB/octave high-pass fixed @ 25Hz

KickEQ™ Boost      variable to +12dB, centered @ 40Hz

CXRC Remote Bass Capable (sold sep.)

Kicker 44CWCS104

10" CompC Subwoofer

Signature Stitches
Our signature yellow stitching creates a superior bond between the tough, ribbed polyurethane surround and polypropylene cone for the best in reliability.

Poly Perfection
CompC subwoofers have a lightweight, injection-molded polypropylene cone to eliminate flex and distortion. You get a deep, accurate sound no matter how hard you push it.

Stay Cool
Perimeter venting slots allow air to constantly circulate around the motor to maintain the perfect operating temperature.

You Make It Bump
With recommended power ratings as high as 600 watts, this KICKER sub delivers serious bass! Use a CX amplifier for the perfect marriage of power and performance.

10" CompC 4 Ohm SVC
CompC Subwoofers are equipped with stamped steel frame construction, inheriting elite innovations for world-class KICKER power, durability and hard-hitting, high-performance bass.

Features:

  • Four-Ohm Voice Coil
  • Injection-Molded Polypropylene Cone
  • Perimeter Venting for Thermal Management
  • Ribbed Polyurethane Surround
  • Signature Yellow Surround Stitching
  • High-Strength Spiralead™ Tinsel Leads
  • Stamped Steel Basket
  • High Temp Voice Coil
  • Spring-Loaded Speaker Terminals

*The CompC 10-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.

Specifications

  • Size (IN.,CM)      10, 25
  • Impedance (OHMS)      4 SVC
  • Max Rec Amplifier Power (WATTS PEAK/RMS)*       600/300
  • Sensitivity (dB 1w/1m)      86.2
  • Frequency Response (Hz)      30-500
  • Mounting Depth (in, cm)       4-13/16, 12.2
  • Mounting Cutout (in, cm)      9-1/8, 23.1
  • Min Sealed Box Vol (cu. ft, L)      1.0, 28.3
  • Max Sealed Box Vol (cu. ft, L)     2.4, 68
  • Min Vented Box Vol (cu. ft, L)      1.25, 35.4
  • Max Vented Box Vol (cu. ft, L)     1.75, 49.6

Bassworx RP210RG Dual 10" Ported Subwoofer Enclosure

Intricately designed with audio excellence in mind, this series is sure to leave its impression on your eyes and ears. The highly irregular interior lends to an acoustically advanced environment for your subwoofers, eliminating the nasty standing waves that lead to acoustic coloration. We engineered the reference series with a complexity that is anything but average. Our proprietary Max-Flow-Port will deliver an extra boost to your bass performance in the sub-40Hz frequency range.

Key features:

  • Wedge shape profile
  • Max Flow Port with sub-40Hz tuning
  • Cosmetically finished baffle panel
  • 1” baffle & 3/4” MDF throughout
  • Rabbet and dado construction
  • Flush mounted push post terminal
More Information
Product Name Car Toys Kicker 10" Bass Pack Package PPKICK1HO
SKU PPKICK1HO
Manufacturer Car Toys
Manufacture's Warranty 2 N/A
Manufacturer's Warranty N/A
We found other products you might like!