Kicker 44KXMA800.5 5 Channel Marine Amplifier

Kicker 44KXMA800.5 5 Channel Marine Amplifier

See what fits your:
JL Audio M800/8v2 800 watt 8 Channel Class D Full Range Marine Amplifier

JL Audio M800/8v2 800 watt 8 Channel Class D Full Range Marine Amplifier

Kicker 44KXMA800.5 5 Channel Marine Amplifier

was $649.99 $599.99
Availability: In stock
Only 1 left
SKU
44KXMA805
  • Class D Power Plant
  • One-Ohm Stable Bass Channel
  • KXARC Wireless Remote Included
  • Gain Control With "Optimal Input" Indicator
  • Conformal-Coated Circuit Boards

Kicker 44KXMA800.5

5 Channel Marine Amplifier

The KXM 800-watt five-channel amplifier is a full system in a single package. KickEQ+™ delivers an enormous 18dB of variable bass boost while a powerful 24dB crossover lets you quickly tune and tweak your sound. A revolutionary illuminated clip indicator is built right into the gain knob to get the most power without distorting the signal.

A wireless controller is also included for perfecting your sound on the fly. Monitor and adjust gain, bass boost, clipping and more without leaving the driver's seat!

Features:

  • Class D Power Plant
  • One-Ohm Stable Bass Channel
  • SHOCwave™ Bass Restoration Processor
  • KXARC Wireless Remote Included
  • Gain Control With "Optimal Input" Indicator
  • Variable 24dB Subsonic Filter
  • FIT2™ (Fail-Safe Integration Technology) Circuitry
  • Variable 24dB Crossover
  • DSP-Controlled Preamp
  • KickEQ+™ 18dB Variable Bass Boost
  • ABYC/NMMA Compliant Power Terminals
  • Conformal-Coated Circuit Boards
  • Easy Access to Settings behind Gasket-Sealed Cover Panel
  • Black Anodized Aluminum Chassis
  • Top-Mounted Teal LED Light Pipe
  • Stainless Steel Mounting Hardware Included

This KXM amplifier delivers as much as 100 watts into four full range channels, or 200 watts into two sets of bridged channels. A separate subwoofer channel delivers as much as 400 watts. See below for more details.

Next Level Knob
Witness a revolutionary wireless remote that goes way beyond a simple bass knob. Control as many as four KXM Mono amplifiers simultaneously, plus the bass channel of the five-channel amplifier. Monitor and adjust vital functions of the amp including clipping, gain, bass boost and more.

Tuned In
No matter where you mount your KXM amp, this easily accessible 24dB crossover lets you quickly tune your system to perfection. To get the most out of your bass, a variable 24dB subsonic filter is featured on mono and five-channel amps.

SHOCwave Reveals the Bass
The SHOCwave™ Bass Restoration processor reveals the depth and power hidden in your digital recordings. This advanced processor is built into mono and five-channel KXM amplifiers, and easily controlled with the wireless KXARC remote (included).

Made for the Water
All power terminals meet stringent ABYC/NMMA standards, while thick gasketing protects the control cover from unwanted moisture. Even the aluminum chassis is UV treated for extra-long life. All KICKER marine amplifiers also utilize conformal coated circuit boards to protect the heart of the amp from water damage.

Craft Your Sound
Big power comes with big control. An adjustable 24dB crossover is featured on our marine amplifiers, as does 18dB of KickEQ+™ bass boost for that extra bump.

Illuminating Knob
Get the absolute most out of your amp with a specially designed gain control that lights up when the perfect input signal is detected from your radio.

Specifications

RMS Power [Watts]

  • @ 14.4V, 4Ω stereo, ≤ 1% THD+N: 50 x 4
  • @ 14.4V, 2Ω stereo, ≤ 1% THD+N: 100 x 4
  • @ 14.4V, 4Ω bridged mono, ≤ 1% THD+N: 200 x 2

Sub Channel RMS Power [Watts]

  • @ 14.4V, 4Ω mono, ≤ 1.5% THD+N: 200 x 1
  • @ 14.4V, 2Ω mono, ≤ 1.5% THD+N: 400 x 1
  • @ 14.4V, 1Ω mono, ≤ 1% THD+N : +/- 10%

Length [in, cm]

  • 12 ¾, 32.4

Height [in, cm]

  • 2 ⅛, 5.5

Width [in, cm]

  • 8 5⁄16, 21

Frequency Response [Hz]

  • AMPS 1 - 2: 10Hz–20kHz
  • SUB: 10Hz-160Hz

Signal-to-Noise Ratio [dB]

  • 95

Input Sensitivity

  • 250mV–10V

Selectable Electronic Crossover

  • AMP 1: OFF/HP/LP, variable 10–5,000Hz with 10X switch;
  • 24dB/octave
  • AMP 2: OFF/HP/LP/BP, variable HP 10–5,00Hz,
  • variable LP 40–5,000Hz with 10X switch; 24dB/octave
  • SUB: Variable LP 40–160Hz; 24dB/octave

Subsonic Filter

  • (amp1) 24dB/octave, variable 10-500Hz, selectable high pass, low pass or all pass, w/10x switch; (amp2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-500Hz, selectable high pass, low pass, all pass or band pass, w/10x switch for lo pass; (KX.5 sub channel) 24dB/octave, variable 40-160Hz, low pass only

Subsonic Filter:

  • Variable 10–80Hz, 24dB/octave

KickEQ+™ Parametric Bass Boost (Remote Control Adjustable)

  • Boost - Variable 0-18db
  • Center Frequency-20Hz-80Hz
  • Bandwidth 1-5

Remote Bass

  • Yes

CEA Power

  • 50W x 4 @ 4 ohms (10Hz–20,000Hz)
  • 200W x 1 @ 4 ohms (40Hz–160Hz)

CEA Signal-to-Noise Ratio

  • -75dB CEA-2006B (ref: 1W, A-weighted)
More Information
Product Name Kicker 44KXMA800.5 5 Channel Marine Amplifier
SKU 44KXMA805
Manufacturer Kicker
Manufacturer's Warranty 1 Year Manufacture's Warranty
Manufacture's Warranty 2 N/A
UPC 713034079903
Manufacturer Sku 44KXMA8005
Amplifier Channels 5 Channel
RMS Power Output (Watts x Channels) 50 watt x 4, 200 watt x 1
Power at 2 Ohms (Watts x Channels) 100 watt x 4, 400 watt x 1
Bridged Power (Watts x Channels) 200 watt x 2
Minimum Impedance Unbridged 2 Ohm
Minimum Impedance Bridged 4 Ohm
Signal to Noise Ratio @ Rated Power 95dB
Amplifier Class Class D
Low-Pass Crossover Frequency 10-500Hz
High-Pass Crossover Frequency 10-500Hz
Bass/Gain Remote Yes/Included
California residents see Prop 65 Warnings