60.11CS main

Infinity Kappa 60.11cs True High-Fidelity 6.5" Component Speaker System

Infinity Kappa 462.11cfp 4x6

Infinity Kappa 462.11cfp 4x6" Coaxial Speaker Pair

Infinity Kappa 62.11i 6.5

Infinity Kappa 62.11i 6.5" Coaxial Speaker Pair

Infinity Kappa 60.11cs True High-Fidelity 6.5" Component Speaker System

was $449.99 Special Price $199.96
In stock
Only 2 left
  • Carbon Glass Matrix Injected Frames
  • Plus One Glass-Fiber Woofer Cones
  • Edge-Driven Fabric Soft Dome Tweeter

Infinity Kappa 60.11CS

6.75" Component Speaker System -Also Fits 6.5" Openings

Product details

At a glance:
• 25 – 270 watts suggested amplifier power range
• Injected Carbon Glass Matrix (iCGM) frames
• Vented motor assembly
• Plus One woofer-cone technology
• Edge-driven, soft-dome fabric tweeter
• 2-ohm nominal impedance
• Ultrahigh-frequency response (up to 35kHz)
• Ultrahigh sensitivity (93dB@2.83v/1m)
• Adjustable, push-button tweeter level control
• High-quality passive crossover components
• Protective, soft, rubber-finish grilles
• I-Mount tweeter-mounting hardware
• Mounting adapter rings already included
• Gold-plated, screw-type speaker terminals

25 – 270 watts suggested amplifier power range
Infinity engineers designed the Kappa 60.11cs component speaker to produce impressive, clean sound from a head-unit or amplifier capable of delivering up to 270 watts of power. This makes the Kappa 60.11cs an ideal midrange and tweeter component upgrade for systems powered with head- unit or factory amplifier power systems. They also handle the power from aftermarket amplifiers that are part of very high-fidelity aftermarket upgrades. Remember, great power-handling specifications increase reliability over the lifetime of the speaker, and that means that you’ll be enjoying the Kappa Series for many musical years.

Injected Carbon Glass Matrix (iCGM) frames
Kappa automotive speakers benefit from light and strong composite Injected Carbon Glass Matrix (iCGM) frames. These frames help Kappa Series speakers resist the environmental extremes that a moving car can encounter. They offer superior rigidity, even when you mount them on uneven surfaces (common in car mounting locations), plus exceptional damping of resonances.

Vented motor assembly
The Infinity Kappa 60.11cs component woofer features a vented magnet assembly to let the voice coil breathe. This structure reduces the probability of power compression in systems playing loud over a long period of time. It means a more efficient use of amplifier power so that all the power delivered to the woofer is directed to the voice coil and not wasted as residual heat.

Plus One woofer-cone technology
The Plus One cone on the Kappa series offers more overall speaker-cone area than other speakers in its class. With a larger cone area, the speaker radiates more air. Also, the speaker’s carbon-injected cone material produces a lighter and stiffer cone than the competition. The result is a better low-frequency response and a greater ability to make those important, almost tangible musical notes that people often associate with a larger speaker size.

Edge-driven, soft-dome fabric tweeter
The Infinity Kappa tweeter’s 3/4-inch (20-millimeter) soft-dome, edge-driven fabric tweeter design increases power handling while reducing high-frequency distortion. An edge-driven tweeter also has better dispersion characteristics and allows for a lower crossover frequency than comparable tweeters of its size, which improves imaging. The result is improved vocals and clarity in music. There’s no sense in a speaker’s playing loud if it doesn’t sound clean, too.

2-ohm nominal impedance
The 2-ohm nominal impedance of the Infinity Kappa 60.11cs component speakers allows compensation for any added resistance in thin factory-installed speaker wiring and provides more output than factory-installed speakers or aftermarket speakers in the 60.11cs’s class.

Ultrahigh-frequency response (up to 35kHz)
A wide frequency response that extends to 35kHz helps compensate for speaker placement variations in the car and human hearing deficiencies in the high-frequency spectrum above 15kHz. The result is that the Infinity Kappa 60.11cs component speakers deliver more of the full-range frequency response that you associate with great sound.

Ultrahigh sensitivity (93dB@2.83V/1m)
High sensitivity allows a wide range of power, which has positive results without overdriving the audio system. With a sensitivity of 93 decibels at 2.83 volts/1 meter, the Infinity Kappa 60.11cs component speakers achieve excellent volume and musicality with as little as 5 watts RMS. This sensitivity means better performance overall with very moderate power, whether the speaker’s using a dedicated amplifier or not. The high sensitivity of the Kappa Series makes it ideal for upgrading a factory system’s existing speakers with very noticeable fidelity improvements.

Adjustable, push-button tweeter level control
The Infinity Kappa 60.11cs component speakers feature 0-decibel and +3-decibel settings to custom-tune the high frequencies. Custom tuning allows users to optimize the sound for different in- vehicle locations. You can custom-tune your speakers by pushing a button on the passive crossover.

High-quality passive crossover components
The passive filter components in the Infinity Kappa 60.11cs component speakers’ crossover network use only the best parts, including low-loss air core inductors, low-hysteresis polypropylene capacitors and high-quality resistors. They are engineered to require minimal parts for filtering, which also means minimizing phase-related anomalies. Overall, the combination results in each Kappa Series speaker having a unique filter arrangement with minimal but very effective parts to achieve true high fidelity, clarity and performance.

Protective, soft, rubber-finish grilles
The Infinity Kappa 60.11cs component speakers feature a handsome appearance, with a soft rubber finish like the finish on many mobile-phone protective cases or the back of home A/V remotes. The beautiful chrome inserts on the grille match modern interiors, and there are no visible mounting screws. The grilles are an ideal complement to any installation location where the speakers are not already installed behind a factory-speaker location.

I-Mount tweeter-mounting hardware
The Infinity Kappa 60.11cs component tweeter includes the I-Mount™ (U.S. patent number 5,859,917) tweeter-mounting system, which allows easy flush mounting or surface mounting – and gives you more installation options.

Mounting adapter rings included
Infinity Kappa 60.11cs component speakers include an additional set of mounting adapter rings to allow the speakers to fit securely in a variety of factory speaker locations, including 6-inch, 6-1/2- inch and 6-3/4-inch with a versatile adapter ring.

Gold-plated, screw-type speaker terminals
Gold resists corrosion from normal automotive use, which makes it ideal for the connections on Infinity Kappa speakers. By adding screw terminals, the Infinity Kappa 60.11cs speakers ensure tight, long-term connections that also allow reliable connection with the large-gauge speaker cables common in high-end aftermarket installations.

What’s in the box
• 2 Infinity Kappa component 6-1/2" (165mm) woofers
• 2 Infinity Kappa component 3/4" (20mm) tweeters
• 2 passive crossover networks
• 2 mounting adapter rings
• 2 protective grilles
• 2 foam tape pieces for mounting surface
• 2 I-Mount tweeter housings with hardware
• 2 Infinity badges for tweeter grilles
• Miscellaneous mounting hardware
• Owner’s/installation manual


Speaker Features/Specifications

Power Handling, RMS 90 W
Power Handling, Peak 270 W
Frequency Response 45Hz – 35kHz
Nominal Impedance 2 Ohm
Sensitivity (2.83V @1m) 93 dB
More Information
Product Name Infinity Kappa 60.11cs True High-Fidelity 6.5" Component Speaker System
SKU 6011CS
Manufacturer Infinity
Manufacturer Sku KAPPA60.11CS
Manufacturer's Warranty 3 Year Manufacture's Warranty
Manufacture's Warranty 2 N/A
UPC 050667368616
Power Handling (Watts RMS) 90 W
Power Handling (Watts Peak) 270 W
Frequency Response 45Hz - 35kHz
Sensitivity 93 dB
Woofer Composition Formed glass fiber
Woofer Surround Rubber
Cutout Diameter (in) 5-1/8"
Top-mount Depth (Inches) 2-1/8"
We found other products you might like!