JL Audio PPJLA3 10 Inch Enclosed Subwoofer with Amp Package

Boss PPBOSS1 Party Pack

Boss PPBOSS1 10 Inch Subwoofer, Amp and Sealed Enclosure Package

Free 2-Day Shipping
Special Price $849.96 was $1,069.96
In Stock
  • JL Audio 10W1v3-4 10-Inch Subwoofer (x2)
  • JL Audio XD600/1v2 Monoblock Subwoofer Amplifier
  • Bassworx Reference Series RP10RG Dual 10 inch Ported Subwoofer Enclosure

JL Audio XD600/1v2 Monoblock Subwoofer Amplifier

Product Type: Monoblock Subwoofer Amplifier
Inputs: Differential-balanced with RCA jack inputs
On-board Crossover: State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable).
Preamp Output: Buffered pass-through type
Infrasonic Filter: 24 dB/octave Butterworth @ 30 Hz, defeatable
Dual mono speaker output connections: Accept up to 12 AWG wire
+12V and Ground connections: Accept up to 4 AWG wire
Rated Power 14.4 V: 600W RMS x1 @ 2 ohms
Rated Power 14.4 V: 400W RMS x 1 @ 4 ohms
Rated Power 12.5 V: 300W RMS x 1 @ 4 ohms 500W RMS x 1 @ 2 ohms
THD at Rated Power: 1% @ 2 ohm
S/N Ratio: >87 dB referred to rated power
(A-weighted, 20 Hz-20 kHz noise bandwidth)
> 67 dB referred to 1W
(A-weighted, 20 Hz-20 kHz noise bandwidth)
Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
Damping Factor: >1000 @ 4 ohms / 50 Hz
> 500 @ 2 ohms / 50 Hz
Input Range: 100mV - 4V RMS
Dimensions (L x W x H): 8.52 in. x 7.09 in. x 2.05 in.
217 mm x 180 mm x 52 mm

JL Audio 10W1V3-4 10 inch Subwoofer (2)

A beautiful, new injection-molded cone body with a classic JL Audio logo steps up the cosmetics on the front of the driver, while a new black basket finish and field plates with machined surfaces dress up the rear in a major way.

The best-selling woofers in the USA just got a whole lot better.

Key Improvements over W1v2's:

  • Larger, more powerful motor systems – 12W1v3: 25% larger – 10W1v3: 27% larger
  • 20% more linear excursion capability!


  • Very small sealed enclosure volume requirements
  • Shallow mounting depth
  • No pole vent: permits mounting close to rear wall of enclosure.
  • Long linear excursion capability
  • Patented "VRC" vented reinforcement collar
  • Patented "floating cone attach method" technology
  • DMA-optimized motor designs
  • Stamped steel frame
  • Injection molded, mineral-filled polypropylene cone with rubber surround


Nominal Diameter: 10 in (250 mm)
Recommended Power Range:
75 - 300 W
0.45 in (11.4 mm) one-way, linear
Single 2 ohm or Single 4 ohm
Rec. Sealed Enclosure:
0.625 cu.ft. (17.7 l)
Mounting Depth:
4.5 in (114.3 mm)
Second Quarter 2012
Suggested Retail Price USD:


Bassworx Reference Series RP10RG

Dual 10 inch Ported Subwoofer Enclosure

Intricately designed with audio excellence in mind, this series is sure to leave its impression on your eyes and ears. The highly irregular interior lends to an acoustically advanced environment for your subwoofers, eliminating the nasty standing waves that lead to acoustic coloration. We engineered the reference series with a complexity that is anything but average. Our proprietary Max-Flow-Port will deliver an extra boost to your bass performance in the sub-40Hz frequency range.

Key features:

  • Wedge shape profile
  • Max Flow Port with sub-40Hz tuning
  • Cosmetically finished baffle panel, available
    in matte black vinyl, carbon fibre vinyl,
    or high gloss paint
  • 1” baffle & 3/4” MDF throughout
  • Rabbet and dado construction
  • Flush mounted push post terminal

Return Policy

30 Day No Hassle Returns

Installation Guarantee

Lifetime guarantee on installation


Call 1-888-CARTOYS
Contact Us

More Information
Product Name JL Audio PPJLA3 10 Inch Enclosed Subwoofer with Amp Package
Manufacturer JLAudio
Manufacture's Warranty 2 N/A
Manufacturer's Warranty N/A
Speaker Size 10 " Subwoofer