JL Audio M600/6 600W 3/4/5/6 Channel Class D Marine Amplifier

JL Audio M600/6

6-Channel Class D Marine Full-Range Amplifier, 100 w x 6 @ 2 ohm / 75 w x 6 @ 4 ohm - 14.4v

This incredibly flexible amplifier packs a serious full-range punch, and delivers a staggering 100 watts to each of its six channels into 2 Ω (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

With the M600/6, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 4 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 Ω to one pair of satellites and 75 W x 2 @ 4 Ω to a secondary pair of satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2. The M600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

	M600/6
Description:	600W 3/4/5/6 Channel Amplifier
Patented Technology:	Single Cycle Control. (U.S. Patent #6,084,450*)
Inputs:	For superior noise immunity, RCA jack inputs
On-board Crossover:	State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-500 Hz. Configurable as Low-Pass or High-Pass. Defeatable.
Speaker output connections:	Accept up to 12 AWG wire
+12V and Ground connections:	Accept up to 4 AWG wire

M600/6 600W 3/4/5/6 Channel Amplifier Specifications:

	M600/6
Rated Power 14.4 V Stereo:	75W RMS x 6 @ 4 ohms 100W RMS x 6 @ 2 ohms
Rated Power 14.4 V Bridged :	150W RMS x 3 @ 8 ohms 200W RMS x 3 @ 4 ohms
Rated Power 12.5 V Stereo:	60W RMS x 6 @ 4 ohms 90W RMS x 6 @ 2 ohms
Rated Power 12.5 V Bridged:	120W RMS x 3 @ 8 ohms 180W RMS x 3 @ 4 ohms
THD at Rated Power:
S/N Ratio:	>104 dB referred to rated power (A-weighted, 20 Hz-20 kHz noise bandwidth) >84 dB referred to 1W (A-weighted, 20 Hz-20 kHz noise bandwidth)
Frequency Response:	12 Hz - 22 kHz (+0, -1dB)
Damping Factor:	>150 @ 4 ohms per ch./ 50 Hz >75 @ 2 ohm per ch. / 50 Hz
Input Range:	100mV - 4V RMS
Dimensions (L x W x H):	10.23 in. x 7.09 in. x 2.05 in. 260 mm x 180 mm x 52 mm

More Information
Product Name	JL Audio M600/6 600W 3/4/5/6 Channel Marine Amplifier
SKU	M6006
Manufacturer	JLAudio
Manufacturer's Warranty	2 Year Manufacture's Warranty
Manufacture's Warranty 2	N/A
UPC	699440982726
Manufacturer Sku	98272
Amplifier Channels	6 Channel
RMS Power Output (Watts x Channels)	75 x 6
Power at 2 Ohms (Watts x Channels)	100 x 6
Bridged Power (Watts x Channels)	200 x 3
Minimum Impedance Unbridged	2 Ohm
Minimum Impedance Bridged	4 Ohm
Signal to Noise Ratio @ Rated Power	104dB
Amplifier Class	Class D
Low-Pass Crossover Frequency	50-500Hz
High-Pass Crossover Frequency	50-500Hz
Bass/Gain Remote	Yes/Optional