SEE WHAT FITS YOUR CAR:
Start shopping for your car

JL Audio M3-770ETXv3-Gw-S-Gw 7.7" Enclosed Tower Coaxial Speaker System - Gloss White

Boss Audio BRT26A Front

Boss Audio BRT26A 26" IPX5 Rated ATV/UTV Powered Sound Bar

Power Bass XL-850

PowerBass XL-850 8 Speaker 300 watt Amplified Bluetooth Powersports Soundbar

Free 2-Day Shipping
$749.99
In Stock
SKU
M37ETXSGW
  • Marine-grade, synthetic fiber spiders
  • Tight, clean, articulate bass
  • Corrosion and UV-resistant polymer baskets

JL Audio M3-770ETXv3-Gw-S-Gw 7.7" Enclosed Tower Coaxial Speaker System - Gloss White

Overview

Enclosed in these beautiful, injection-molded enclosures are our high-performance, M3 7.7-inch coaxial tower speakers. Specifically tuned for tower enclosure applications, these coaxial drivers deliver clean, loud audio that can be heard well beyond the boat when mounted up high.

The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. Each is designed to mate with one of our clamp systems (sold separately, and available to fit a wide range of pipe diameters). The wire exits through the center of the mount, staying high and dry, and out of sight. Professional installation is strongly recommended.

For best results, we recommend powering these systems with an amplifier in the 25-140 W per channel range.

Like all JL Audio marine speakers, this system is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.

Sold as a pair.

Need help determining the correct Pipe-Mounting Clamp for your installation? Download the ETXv3 Pipe Fixture Ruler.

General Specifications

System Nominal Impedance: 4 Ω
System Frequency Response: 55 Hz - 25 KHz ± 3 dB
System Efficiency: 90.5 dB @ 1 W / 1 m
Continuous Power Handling (RMS): 70 W
Enclosure Diameter (A): 7.70 in / 196 mm
Enclosure Depth (B): 12.52 in / 318 mm
Height including Mounting Clamp Receiver* (C): 8.56 in / 217 mm
Mounting Clamp Receiver / Enclosure Offset (D): 0.86 in / 22 mm

*Mounting Clamps Required (Sold Separately)

Technology

Dynamic Motor Analysis - DMA Optimized Motor

Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.

Detailed Information:
Since 1997, JL Audio has been at the forefront of Finite Element Analysis-based modeling of loudspeaker motors and suspensions. This research is aimed at decoding what we refer to as the "Loudspeaker Genome"... a project aimed at understanding the true behavior of loudspeakers under power and in motion. A major component of this integrated system is DMA (Dynamic Motor Analysis). Starting with the 15W3 and the W7 Subwoofers in the late 1990's and early 2000's, DMA has played an important role in the design of all JL Audio woofers sold today, including our component woofers.

DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, "big-picture" solution. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker's actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.

DMA is able to analyze the real effects of fluctuating power and excursion upon the magnetic circuit of the motor, specifically the dynamic variations of the "fixed" magnetic field. This delivers intensely valuable information compared to traditional modeling, which assumes that the "fixed" field produced in the air gap by the magnet and the motor plates is unchanging. DMA not only shows that this "fixed" field changes in reaction to the magnetic field created by current flowing through the voice coil, but it helps our engineers arrive at motor solutions that minimize this instability. Analyzing this behavior is critical to understanding the distortion mechanisms of a speaker motor and sheds light on the aspects of motor design that determine truly linear behavior:

  1. Linear motor force over the speaker's operational excursion range
  2. Consistent motor force with both positive and negative current through the coil
  3. Consistent motor force at varying applied power levels

Our ability to fully analyze these aspects of motor behavior allows our transducer engineers to make critical adjustments to motor designs that result in extremely linear, highly stable dynamic loudspeaker motor systems.

The payoff is reduced distortion, improved transient performance and stellar sound quality.

Marine Materials / Testing

Summary:
The design of marine products requires extensive materials testing to achieve reliability and longevity.

Detailed Information:
Building serious marine products requires a real commitment to environmental testing and materials specification. To this end, JL Audio has invested in Ultraviolet testing chambers (to simulate years of sun exposure) and Salt Fog chambers (to simulate years of exposure to salt-water environments). This testing is critical to building products that will not only sound great in your boat, but will also sound great for many, many years.

Materials Used:

  • Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds, specifically formulated with UV inhibitors for marine duty.
  • Marine-grade, synthetic fiber spiders with progressive roll designs to withstand high humidity.
  • Specifically engineered polymer baskets are corrosion and UV-resistant and encapsulate the woofer's motor system to prevent corrosion.
  • Gold-plated, marine-grade brass connection terminals
  • Marine-grade stainless steel mounting hardware is included.
CONTINUE READING...

Return Policy

30 Day No Hassle Returns

Installation Guarantee

Lifetime guarantee on installation

Questions

Call 1-888-CARTOYS
(1-888-227-8697)
Contact Us

More Information
Product Name JL Audio M3-770ETXv3-Gw-S-Gw 7.7" Enclosed Tower Coaxial Speaker System - Gloss White
SKU M37ETXSGW
Manufacturer JLAudio
Manufacturer Sku 93538
Manufacturer's Warranty 2 Year Manufacture's Warranty
Manufacture's Warranty 2 N/A
UPC 699440935388