JL Audio CL-RLC 2-channel Remote Level Control and Line Driver
- 2 Channel Remote Level Control
- Line Driver with Pass-Through
JL Audio CL-RLC
Fully Active, 2 Channel Remote Level Control/Line Driver with Pass-through Outputs
The JL Audio CL-RLC is a true, active level control preamplifier which can be used for subwoofer level control or as an audiophile-grade, full-range volume control. The CL-RLC’s differential- balanced inputs minimize the likelihood of noise, while its very healthy preamp design delivers up to 7.5 VRMS of unclipped output to your amplifier. Unlike cheap, passive line-level controls, no signal passes through the CL-RLC’s control cable and knob. Instead, the control knob only sends volume level signals to the preamp circuit in order to maximize fidelity and minimize the possibility of noise.
Subwoofer Level: By inserting the JL Audio CL-RLC in-line with any signal feeding a subwoofer amplifier you can control the subwoofer level from the front of the vehicle using the supplied control knob. Unlike the RBC-1, which is an EQ boost controller, this is a true level control for the subwoofer amplifier. Another important feature is a buffered pass-through connection so that you can also pass signal along (without volume control) to a satellite amplifier from the same input channels.
Full-Range Volume Control: Since the JL Audio CL-RLC uses top-quality active circuitry, its application is not just limited to subwoofer duty. It can be used whenever and wherever you want to have volume control over any line-level signal. For example, you can use it to control a center-channel level, rear channel levels, or even the level of an iPod® input directly to an amplifier. The possibilities are endless and will enable very interesting things to be accomplished in a wide variety of systems.
- Channel Separation >80 dB
- Output Impedance 475 Ω
- Gain Range 7.5 V RMS
- Max. Unclipped Output 7.5 V RMS
- Frequency Response 10 Hz - 30 kHz (+0/-1 dB)
- THD+N @ Rated Output Less than 0.05% @ 7.5 V RMS
- S/N Ratio >117 dB @ 7.5 V RMS
- Maximum Input Level 4 V RMS
- Operating Current Draw 90 mA
- Width (W) 3.94 in / 100 mm
- Height (H) 1.21 in / 31 mm
- Depth (D) 1.63 in / 41 mm
- Net Weight 0.55 lb / 0.25 kg
|Manufacturer's Warranty||1 Year Manufacture's Warranty|
|Manufacture's Warranty 2||N/A|