Car Toys Quinn Acoustics 12 Inch Party Pack PPQUIN2HO

Car Toys Quinn Acoustics 12 Inch Party Pack PPQUIN2HO

See what fits your:
FREE 2-DAY Shipping on orders $50 or more!
FREE Ground Shipping on ALL orders!

Car Toys Quinn Acoustics 10 Inch Party Pack PPQUIN1HO


JL Audio PPJLA5 10 Inch Enclosed Subwoofer with Amp Package

Car Toys Quinn Acoustics 12 Inch Party Pack PPQUIN2HO

Availability: In stock
  • Jensen Power500x1 Mono Amplifier
  • Quinn Acoustics Q12S4 12" High Power Subwoofer (2)
  • Bassworx RP212RG Dual 12" Vented Subwoofer Enclosure

Car Toys Quinn Acoustics 12" Party Pack PPQUIN2HO

Jensen Power500x1 Mono Amplifier

Features a low-profile heatsink and a High-performance, low noise Surface Mount Design (SMT) preamp design.

More Info

  • High Current / High Efficiency Power Supply (MOSFET Design)
  • High Current Toshiba Output Transistors
  • Low Noise / Low Distortion Pre-Amp Circuitry
  • Optimized Class AB Design Minimizes Distortion and Reduces Idle Current
  • Designed to Drive 4 Ohm and 2 Ohm Loads
  • Continuously Variable Low Pass Filter 40Hz - 300Hz (12dB / Octave)
  • Continuously Variable Subsonic Filter 10Hz - 40Hz (12dB / Octave)
  • Continuously Variable Bass EQ 0 ~ 12dB at 45Hz
  • Crossover Bypass (Full Range)
  • Pass-Thru RCA
  • Short Circuit, Thermal and DC Offset Protection
  • Diagnostic LEDs: Green - Power / Amber – Fault
  • Remote Level Control Ready (Sold Separately)

CEA Specifications

Power Output: 325 Watts RMS x 1-Channel Into 4-Ohms @ 1% THD+N
Signal to Noise Ratio: 100dBA Below Reference (Reference: 1 Watt, 4-Ohms)

Additional Power Output

500 Watts RMS x 1-Channel Into 2-Ohms @ 1% THD+N
Frequency Response: 10 Hz - 60 kHz, -3dB (Reference: 1 Watt)


  • Impedance 2 Ohm to 4 Ohm
  • Frequency Response 10Hz - 60kHz (-3dB)
  • THD+N @ 1 kHz, 1 Watt 0.02%
  • RMS Power 325 Watts, 4 Ohm 500 Watts, 2 Ohm
  • Signal to Noise Ratio >100dB (@ Rated Power)
  • Dimensions 16" x 8.25" x W 2.125" (L x W x H)
  • Input Sensitivity 300mV-6V
  • Input Impedance 20 kOhms Nominal
  • Fuse/Type 2 x 35 Amp ATO Fuse
  • Weight 6.6lbs

Quinn Acoustics Q12S4 12" Subwoofer Driver (2)

Dive in. Quinn Car Audio Subwoofers are likely to pull you in anyway with an ultra-satisfying listening experience you never thought possible.

The beat and bass come off powerful yet accurate and under control at every turn thanks to superior design and premium quality components throughout.


  • High Rigid IMPP Cone with Symmetrical Geometric Cone Design — increases the stiffness of the cone for less harmonic distortion, and provides superior strength, durability, and stability during high power operation at extreme temperatures
  • Butyl Rubber Surround — has top-quality damping characteristics and will last longer than foam surrounds
  • Double Stacked Magnet Assembly — combined with a long wiring width of voice coil allows for long excursions with reduced distortion
  • Kapton® Voice Coil Former — offers higher power handling than aluminum voice coil formers, as well as extremely efficient cooling properties
  • 4 Layer Voice Coil — keeps more wire in the magnetic gap for better output
  • Vented, Extended Pole Piece — keeps the voice coil cool during long excursions at high power

Model Q12S4

  • Size 12"/311mm
  • Impedance 4
  • Frequency Response 24Hz-500Hz
  • Sensitivity 87.3dB
  • Power (RMS) 250 Watts 
  • Power (Max) 500 Watts
  • Cone High Rigid IMPP
  • Surround Butyl rubber
  • Frame Steel
  • Mounting Depth 6.73" / 171mm
  • Voice Coil 2"/50.5mm
  • Magnet 66 oz.
  • Fs 24Hz
  • Vas 4.13 cubic feet/117 Liters
  • Xmax 0.47”/12mm
  • Qts .46

Bassworx RP212RG Dual 12" Ported Subwoofer Enclosure

Intricately designed with audio excellence in mind, this series is sure to leave its impression on your eyes and ears. The highly irregular interior lends to an acoustically advanced environment for your subwoofers, eliminating the nasty standing waves that lead to acoustic coloration. We engineered the reference series with a complexity that is anything but average. Our proprietary Max-Flow-Port will deliver an extra boost to your bass performance in the sub-40Hz frequency range.

Key features:

  • Wedge shape profile
  • Max Flow Port with sub-40Hz tuning
  • Cosmetically finished baffle panel
  • 1” baffle & 3/4” MDF throughout
  • Rabbet and dado construction
  • Flush mounted push post terminal
More Information
Product Name Car Toys Quinn Acoustics 12 Inch Party Pack PPQUIN2HO
Manufacturer Quinn Acoustics
Manufacture's Warranty 2 N/A
Manufacturer's Warranty N/A
Speaker Size 12" Subwoofer
California residents see Prop 65 Warnings