Kicker 42PXA500.1 PXA Series Mono Amplifier
- Made for All Environments
- Small Footprint, Big Power
- High Level or Preamp Input Selection
PXA Series Mono Amplifier
Made for all environments, PXA-Series Amplifiers are weather-resistant with a conformal-coated circuit board for extra protection against the elements.
PXA-Series Power Amplifiers are specifically designed for motorized vehicles with small battery/charging systems, and in an incredibly small footprint that can be installed in motorcycle saddle bags or fairings, glove compartments and other previously unusable spaces.
No-rust, stainless-steel mounting hardware and a single Molex plug containing all wiring connections makes for easy installation.
2 Turn-on Modes
PXA Amps utilize a speaker (amplified) or low (pre-amp)-level input, variable input gain adjustment and two auto turn-on modes (DC offset or 12-volt trigger).
Real-World Open-Air Sound
The sound output is undeniably KICKER. PXA Amps take into account real-world, open-air listening in powersports applications, smartly directing precious power where it succeeds - in the 40-to-250-hertz frequency range where a biker or rider can truly hear and feel it in the open air. It also contains a differential audio circuit that reduces engine noise in the audio system for low T.H.D. (total harmonic distortion) and superb clarity at high volumes.
RMS Power [Watts]
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 250 x 1
@ 14.4V, 2Ω mono, ≤ 1% THD+N : 500 x 1
Length [in, cm]
Height [in, cm]
Width [in, cm]
Frequency Response [Hz]
25 - 120
Signal-to-Noise Ratio [dB]
Low Level: 125mV–5V
High Level: 250mV–10V
Selectable 60Hz, 80Hz, 100Hz or 120Hz low pass; 24dB/octave slope
KickEQ™ Bass Boost
Selectable 0 or +6dB @ 40Hz
25Hz, 24dB/octave slope
|Product Name||Kicker 42PXA500.1 PXA Series Mono Amplifier|
|Manufacturer's Warranty||2 Year Manufacture's Warranty|
|Manufacture's Warranty 2||N/A|
|Amplifier Channels||Mono Block|
|RMS Power Output (Watts x Channels)||250 x 1|
|Power at 2 Ohms (Watts x Channels)||500 x 1|
|Minimum Impedance Unbridged||2 Ohm|
|Signal to Noise Ratio @ Rated Power||95dB|
|Low-Pass Crossover Frequency||60Hz, 80Hz, 100Hz or 120Hz|