CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.
CX600.1 Mono Amplifier
The CX 600.1 Mono Amplifier is built for big bass in a sleek, yet affordable package.
Using a Class D power plant and FIT™ (Failsafe Integration Technology) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system.
This CX amplifier delivers as much as 600 watts into one channel.
CX-SERIES MONOBLOCK AMPLIFIERS CXA600.1
Power (watts/ch), 2 Ohm mono 600
Dimensions (in.) 2-3/8H x 7-3/16W x 8-1/8, (cm) 6.0H x 18.0W x 21
Frequency Response (Hz): 25-200, +0/-1dB
Input Sensitivity: high level 250mV-10V, low level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
Subsonic Filter 24dB/octave high-pass fixed @ 25Hz
KickEQ™ Boost variable to +12dB, centered @ 40Hz
CXRC Remote Bass Capable (sold sep.)
12" CompD Series Subwoofer Dual 2 ohm (2)
CompD™ Subwoofers are equipped with proven construction, inheriting elite innovations for world-class KICKER power, durability and hard-hitting, high-performance bass.
"Bass is what we are all about… it's our specialty. From the very start, we've been known for rich sound. It's the KICKER heritage, and it's carried out through all we do," said KICKER founder and President Steve Irby
Available in 2- or 4-Ohm impedances, dual-voice-coil CompD Subwoofers make convenience priority with its wiring flexibility (series/parallel/stereo), leading to easy impedance matching with CX-Series Amplifiers for the biggest bass possible. CompD Subwoofers are founded on legendary engineering that is tried and true, building upon the success of the KICKER's original Competition Series from 1986.
CompD Subwoofers are ideal for vented or sealed enclosures, or even in free-air applications, and handle more power than any previous Comp Series generation. Each is equipped with a lightweight, injection-molded polypropylene cone and tough, ribbed polyurethane surround for eliminating flex and distortion. The heavy-duty motor structure includes a rip-resistant, large-diameter spider that supplies less flex, longer life and better accuracy. High-strength Spiralead™ tinsel leads weave through the large spider for max signal transfer. High-temp coil wire winding around a vented pole piece and innovative Quad Venting™ slots contribute to the woofers' efficient cooling attributes and durability.
Its full-coverage, steel basket is shallower than previous Comp baskets, fitting into more applications, and it incorporates 1/4-inch, heavy-duty spade connections.
- Size (in, cm) 12, 30
- Impedance (Ohms) 2 or 4 DVC
- Max. Rec. Amp. Power Watts (Peak/RMS) 600/300
- Sensitivity (dB @ 1W, 1m) 88.3
- Mounting Depth (in, cm) 5-3/8, 13.6
- Mounting Diameter (in, cm) 11, 27.9
- Min Sealed Box Vol (cu. ft, L) 1.25, 35.4
- Max Sealed Box Vol (cu. ft, L) 3.5, 99.1
- Min Vented Box Vol (cu. ft, L) 1.75, 49.6
- Max Vented Box Vol (cu. ft, L) 2.25, 63.7
Dual 12" Street Wedge Series Slot-Port Subwoofer Enclosure
Even in our highly popular, entry enclosure solution, Bassworx is unwilling to compromise on the build quality that we’re known for. The street Wedge enclosure is manufactured using the same high-quality MDF, rabbet and dado assembly methods, push-post terminal and top grade carpeting as our premium models. Properly matched with a small volume subwoofer, these enclosures are sure to impress!
- Wedge shape profile
- Compact design
- Push post terminal
- 3/4” baffle & 5/8” MDF throughout
- Top grade carpeting
- Width 33"
- Depth 14.25"
- Height 15"
- Volume 2.46cf
- Tuning 40hz