Dash Mount 6 Channel EQ/Crossover
- 5 Bands of Parametric Equalization
- Crossover 2/3-way or 3-way Band Pass
- High Voltage preamp output (9.5v)
- Noise rejecting copper chassis
- Isolated remote power supply
A Full-System Preamp for People Who are Serious About Sound Quality!
Here is an Equalizer/Preamp worthy of the Zapco name. The ASP-Q1 was not designed to be an “accessory” toy or a piece of jewelry for the dash. The ASP-Q1 was designed to be an effective tool in tuning and controlling the sound of a car audio system. As a dash mount equalizer it is unmatched. With 5 bands of parametric equalization you can put up ±18dB of correction at any points in the frequency spectrum with out being limited by fixed center points. With audiophile grade internal components in the signal path and precision pots for all adjustments the sound will be clean and transparent, with rock solid bass and crystal clean highs. The ASP-Q1 excels as a crossover as well. You can configure a 2-way with bass and dual highs or as a 3-way crossover with a band pass. The aux input with its own input gain controls allow a portable source to be plugged in and level matched to the main input. The over-sized power supply gives you a 9.5 volt line driver with 14 volts available for peaks. This gives the ASP-Q1 plenty of headroom so even on the biggest signal peaks you amp will get a clean distortion free signal. The ASP-Q1 is more than just an Equalizer. It is a true control preamp for your sound system.
How Serious Is Zapco About Sound Quality
- We start with a full copper chassis for noise rejection
- We use audiophile quality audio caps and op-amps
- We remote the power supply for noise isolation
- We have high precision pots custom built just for Zapco
- We give it everything you will need for total system control
- THD .001%
- S/N 110dB
- Stereo Separation 92dB
- Headroom 20dB
- Preamp output 9.5V RMS / 14V Peak
- Dimensions (mm) L/W/H: 176 x 121(w/RCA) x 25.5
Features and Functions
Five bands of Parametric Equalization: Since no two cars are the same, there is no way for us to know exactly where the center points need to be in any particular car. The ASP-Q1 lets you vary the center point of each of your 5 EQ bands to put the correction exactly where you need it to custom tune your system to your car car.
Variable 18dB/octave electronic crossover: There are 4 crossover filters on the ASP-Q1. You can only 3 filters to configure a 2-way system with a sub woofer and front and rear speakers with high pass or full range and fade front to back from the EQ. You can also use all 4 filters and configure an active 3-way system with a woofer, a band passed midrange, and a high pass for tweeter.
Separate Bass Control: Bass output is controlled separately. The bass lever lets you balance the bass to the highes. As well as the crossover filter for the bass there is a bass phase control to adjust the phase of the bass signal from 0 to 180 degrees to help align the bass wave to the rest of the system.
Auxiliary input: The ASP-Q1 has an auxiliary input so you can play from another in-car source ro from a portable player
Input gain controls: Each channel of both main and Auxiliary input has its own input signal adjustment.
Balanced/Unbalanced Inputs: The ASP-Q1 can accept either balanced inputs, with a Bal/UnBal switch for Main-in and Aux-in
Tiffany style panel mount RCA connectors: These give positive, trouble free RCA signal connection
High voltage power supply: The ASP-Q1 has a remote high voltage power supply for or a true 9.5 Volt RMS preamp output