Description 10" Punch P3 4-Ohm DVC Shallow Subwoofer
The Rockford Fosgate P3 10" Shallow Mount subwoofers deliver the Punch - even in limited
depth mounting situations. All vehicles are not the same: some can accommodate deep
subwoofers and some can't. In the past that meant accepting less output. Not anymore! Now
even depth challenged vehicles can have REAL Bass and the Dual Voice Coil capability allows
bass for every application.
Aluminum V/C Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide excellent
heat dissipation. Unlike traditional plastic substitutions, aluminum acts like a heat-sink to
quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL
conditions.
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This
means your speaker has the capacity to handle power under continuous damand, not
instantaneous power handling, that over time, can damage voice coils.
Reversible Mounting
Rockford Fosgate subwoofers can be mounted in either direction. A removable trim ring can be
installed on the back or front side of the subwoofer frame. This gives the subwoofer a finished
look regardless of mounting configuration.
Spherically Vented Motor
Efficiently exhausts excessive heat build-up on the spider and pole piece.
Stitched Tinsel Leads
Improved reliability and performance by reducing fatigue and possible shorting.
Custom 10-AWG nickel plated push terminals
Extended pole piece and bumped vented backplate
High excursion Poly-ether-ester surround
High-temp voice coil with spun-laced Nomex® re-inforcement collar
Kevlar Fiber reinforced semi-pressed paper cone and ABS/Acrylic dustcap
Linear spider with embedded 16 AWG tinsel leads
Protective PVC textured magnet cover
Reversable diamond cut cast aluminum trim ring
Rigid die-cast aluminum low profile basket
Vented spider cavity
Product Specifications
P3SD410
CEA-2031 Compliant
Size 10"
Impedance 4-Ohm x 2
Power Handling:
-300 Watts RMS
-600 Watts Max
Voice Coil Diameter 2.5" 4-Layer (6.35 cm)
Motor Size 46 oz.
Speaker Connector Dual 10 AWG compression
SPL (1W/1M) 83 dB
Mounting Depth 3.50 in. (8.89 cm)
Shipping Weight 13.40 Lbs. (6.07 Kg.)
Rec. Sealed Enclosure
-0.50 cu. ft. (16.42 liters)
-Range: 0.40 cu. ft. - 1.0 cu. ft.
-Range: (11.33 liters - 28.32 liters)
Rec. Vented Enclosure 0.75 cu. ft. (21.24 liters)
Vented Tuning Frequency:
-46 Hz
-Port: (1) 3" diam. x 12" long
-Port: (1) 7.62 cm x 30.48 cm
Product Reviews
Rate this product: (This review will be evaluated by Car Toys staff. Note that your review should be about this product, not about your particular order or about Car Toys or any other company. Please refer to our Contact Us page for questions about the product or your order.)
About Store Pickups
This product is available for store pickup ONLY.
Car Toys Stores are located in the following states:
