Manufacturer's Description
Rockford Fosgate P3D412
The P3 12" subwoofers are very popular, especially with people running multiple subwoofer configurations. Their dual voice coil design gives many different wiring options to ensure you get the most from your amplifier.
Aluminum V/C Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide excellent heat dissipation. Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.
Reversible Mounting
Rockford Fosgate subwoofers can be mounted in either direction. A removable trim ring can be installed on the back or front side of the subwoofer frame. This gives the subwoofer a finished look regardless of mounting configuration.
Stitched Tinsel Leads
Improved reliability and performance by reducing fatigue and possible shorting.
Tall Profile Surround
Allows maximum linear travel without reducing overall piston size.
Venturi-Effect Cooling
Increased air speed across key thermal masses of speaker motor parts to maximize cooling.
Custom 10-AWG nickel plated push terminals
Dual linear spider with embedded 16 AWG tinsel leads
Extended pole piece and bumped backplate
High excursion Poly-ether-ester surround
High-temp voice coil with spun-laced Nomex® re-inforcement collar
Kevlar Fiber reinforced semi-pressed paper cone and ABS/Acrylic dustcap
Protective PVC textured magnet cover
Reversable diamond cut cast aluminum trim ring
Vented spider cavity
|
P3D412
CEA-2031 Compliant
Size 12"
Impedance 4-Ohm x 2
Power Handling 500 Watts RMS / 1000 Watts Max
Voice Coil Diameter 2.5" 4-Layer (6.35 cm)
Motor Size 102 oz. double stacked
Speaker Connector Dual 10 AWG compression
SPL (1W/1M) 85 dB
Mounting Depth 6.75 in. (17.15 cm)
Shipping Weight 25.60 Lbs. (11.61 Kg.)
Rec. Sealed Enclosure:
-1.0 cu. ft. (28.88 liters)
-Range: 0.75 cu. ft.- 1.25 cu. ft.
-Range: (21.24 liters - 35.40 liters)
Rec. Vented Enclosure 1.79 cu. ft. (50.69 liters)
Vented Tuning Frequency:
-40 Hz
-Port: (1) 4" diam. x 10" long
-Port: (1) 10.16 cm x 35.56 cm
|
There are no accessories associated with this product at this time.
|
Shopping Cart
