Accurate Dynamic Sound Reproduction
Alpine's goal is to deliver the best sound quality possible. With the PDX series, digital switch-mode amplification yields incredible sound quality. Advances in the PDX design include improved feedback circuitry to faithfully reproduce the input signal for improved dynamic range and higher fidelity. If you¡¯re listening to your favorite rock song, your amp is ready to jump from loud to calm and back again with ease.
Installation Flexibility
The PDX amplifiers¡¯ unique design allow for a clean, easy, and fast install in your car! All the controls and wiring connections are in one convenient location.
Save Space
PDX amplifiers are 60% smaller than previous models with the same output power. Install your amps easily without sacrificing valuable room, power and performance.
Smart Stacking
The PDX amplifiers feature a smart stackable design. All PDX amplifiers are the same size, regardless of the amount of power or channel specifications. Their exclusive design allows them to be stacked vertically on top of one another. This is an industry-first installation option that saves a ton of space in the trunk or under a seat.
Low Resistance, High Current Speaker Terminals
Quick disconnect plugs with low resistance and high current capabilities make installing quick and easy.
More Power, Better Sound
PDX amplifiers deliver outstanding sound quality. The revolutionary design of the PDX incorporates improved feedback circuitry and power supply filtering system, plus a damping factor that is 350% better than Class A/B amps.
Unprecedented Sound Matching & Accuracy
A highly effective Powerful Feedback Circuit accurately compares the amplifier¡¯s output against the original music signal. If there are any differences found between the two, the feedback circuit automatically removes the distortion in real-time! This keeps your music true to the original recording without added distortion or filter noise.
Same Power Output - 2ohm or 4ohm Configuration
PDX amplifiers have the unique capability to deliver the same power output regardless of 2ohm and 4ohm loads. This provides the ultimate in system flexibility and subwoofer configuration diversity.
Power On Demand*
A combination of an advanced power supply, Class-D design, and switch-mode digital amplification allow PDX amplifiers to stay extremely efficient at all power levels. This produces less heat, eliminating the need for large heat sinks, just another reason why they can be much more compact than conventional amps.
The PDX amplifiers use Direct FETs device to make switch-mode digital possible. Direct FETs are very small output devices that take up less room and they switch on and off extremely fast when needed. Their ultra high-speed switching capabilities allow them to perform at frequencies that other Class-D amplifiers struggle to reproduce. This provides control over power consumption, and cooler operation.
*Full Range PDX Amplifiers Only (PDX-4.150, PDX-4.100, PDX-2.150 & PDX-5)
Product Specifications
PDX-4.100
General
Gain Control: Adjustable
Board Design: 4-Layer Glass Epoxy PC Board
Final Outputs: Fast Switching, Low Impedance Direct Fets
Pre-Amp Stage: Discrete
Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
Crossover: Adjustable High Pass, Low Pass
RCA Output: Non-Fading Pre-Amp Output
Power Indicator: Top Mounted Blue LED Power/Status Indicator
Current Protection: Auto Over-Current Protection
Board Circuitry: STAR Ciruit
Power Supply Design: DC-DC PWM Power Supply
Power Supply: Fast Switching, Low Impedance Direct Fets
Thermal Control: Thermal Management Control
Channel Design: 4/3/2 Channel
Amplifier Type: Class-D (Switch Mode Digital)
Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4ohm) 76 dBA
Speaker Impedance: 4 or 2 ohm
Frequency Response: 20Hz - 20kHz (+0, -1dB)
Input Sensitivity: 0.2V to 4.0V (For Rated Power)
Power Requirements: 14.4V DC (11V to 16V)
Install
Mounting Design: Easy Stacking
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
Terminal Layout: One-Sided
Connectors: Quick Disconnect Terminals
Dimensions
Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16''
Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm
Sound Tuning
Crossover: Variable, 30-400Hz (-12dB / oct ), Low-Pass/High-Pass /OFF Selectable
RMS Power Ratings
Bridged 4 Ohms: Bridged into 4ohm (¡Ü1%THD+N) 200w x 2
Per channel into 2 Ohms: (@14.4V ¡Ü1%THD+N, 20Hz - 20kHz) 100W x 4
Per channel into 4 Ohms: (@14.4V ¡Ü1%THD+N, 20Hz - 20kHz) 100W x 4
CEA-2006 Power Ratings
CEA-2006 Power Rating: (4/2 ohm@14.4V ¡Ü1%THD+N), S/N 76dBA (Ref. 1W into 4 ohm): 100w x 4
Product Reviews
Rate this product: (This review will be evaluated by Car Toys staff. Note that your review should be about this product, not about your particular order or about Car Toys or any other company. Please refer to our Contact Us page for questions about the product or your order.)
About Store Pickups
This product is available for store pickup ONLY.
Car Toys Stores are located in the following states:
