JL Audio 6W3v3-4 6.5 Inch Subwoofer Driver 4 ohm

JL Audio 6W3v3-4

6.5" Subwoofer Driver 4 ohm sku# 92145

If you need a small-format subwoofer that really delivers in extremely small enclosures, this is where your search ends. The 6W3v3 is a true subwoofer, through-and-through. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.35 in. (8.9 mm) one-way linear excursion.
The 6W3v3-4 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a tiny 0.15 cu. ft. (4.2 l) sealed enclosure, or a 0.25 cu. ft. (7.1 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

General Specifications

• Continuous Power Handling (RMS) 150 W
• Recommended RMS Amplifier Power 50 - 150 W
• Nominal Impedance (Znom) 4 Ω

Physical Specifications

• Nominal Diameter      6.5 in / 165 mm
• Overall Diameter (A)      6.85 in / 174 mm
• Mounting Hole Diameter (B)      5.5 in / 140 mm
• Bolt Hole Circle (C)      6.125 in / 156 mm
• Magnet Diameter (D)      4.25 in / 108 mm
• Mounting Depth (E)      4.25 in / 108 mm
• Driver Displacement      0.02 cu ft / 0.57 L
• Net Weight      6.1 lb / 2.8 kg

Parameters

• Free Air Resonance (Fs) 41.80 Hz
• Electrical “Q” (Qes) 0.533
• Mechanical “Q” (Qms) 11.027
• Total Speaker “Q” (Qts) 0.508
• Equivalent Compliance (Vas) 0.181 cu ft / 5.13 L
• One-Way Linear Excursion (Xmax)* 0.35 in / 8.89 mm
• Reference Efficiency (no) 0.0700%
• Efficiency (1 W / 1 m)** 80.49 dB SPL
• Effective Piston Area (Sd) 17.36 sq in / 0.0112 sq m
• DC Resistance (Re) 3.476 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Sealed Enclosure Specifications

• Wall Thickness      0.5 in / 13 mm
• Front Baffle Thickness      0.5 in / 13 mm
• Volume (net int.)      0.15 cu ft / 4.2 L
• External Width (W)      8.5 in / 216 mm
• External Height (H)      8.5 in / 216 mm
• External Depth (D)      6.25 in / 159 mm
• F3      34 Hz
• Fc      60.6 Hz
• Qtc     0.729

Enclosure Notes
* The enclosure recommendations listed are external dimensions which assume the use of 1/2 in (13 mm) thick material. Do not use any material with a thickness of less than 1/2 in (13 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.
* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.
Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

Ported Enclosure Specifications

• Wall Thickness      0.5 in / 13 mm
• Front Baffle Thickness      0.5 in / 13 mm
• Volume (net int.)      0.25 cu ft / 7.1 L
• External Width (W)      14.75 in / 375 mm
• External Height (H)      9.75 in / 248 mm
• External Depth (D)      5.25 in / 133 mm
• Internal Slot Port Width (SW)      4.25 in / 108 mm
• Internal Slot Port Height (SH)      0.5 in / 13 mm
• Internal Slot Port Depth (SD)      12.25 in / 311 mm
• Port Extension Length (EL)      11.75 in / 298 mm
• Tune to      38 Hz
• F3      36.6 Hz

Enclosure Notes
* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.
* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.
* All specifications are subject to change without notice.
Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.